• Journal of the Korean Society of Costume
• /
• v.64 no.2
• /
• pp.70-83
• /
• 2014

This study was done to provide the basic data for improving the sizing system for infants and children's clothing. The 97 brands were surveyed through market research and on-line searching. Size and body measurements were analyzed according to the content of nominal size, type of market, national and foreign brands, and meaning of reference size. The results are as follows: 1. The meaning of nominal sizes was categorized as five cases: the size based on body measurements, the size based on age, the meaningless size, letter cord and combination of 2 out of 4 cases above. The nominal size based on height was most observed, and the meaningless nominal size was second. The meaningless nominal size can cause confusion when consumer buys clothing. 2. The department stores mainly used the nominal size based on body measurements, but the Internet shopping malls largely used the meaningless nominal size. 3. Both national brands and foreign brands mainly used the nominal size based on height. But national brands largely used the different nominal sizes. 4. 41 brands indicated body measurements as reference size and 26 brands indicated product measurements as reference size. Therefore consumers tended to confuse the body measurements with the product measurement.

• Journal of the Korean Home Economics Association
• /
• v.33 no.6
• /
• pp.199-211
• /
• 1995

The purpose of this study was to provide a brassiere size chart for making the well-fitted brassiere. The subjects are 2811 women whose range of age is 12 to 59. These woman were classified into 5 age groups by seniority ; age group 1(12~19), age group 2(20~29), age group 3(30~39), age group 4(40~49), age group 5(50~59). statistical differences of measurements were analyzed among 5 age groups through ANOVA. Correlation between measurements were analyzed by correlation analysis. In addition, new brassiere size chart and production rate tables were proposed in this study. The results of the study were as follows. 1) Most of the body measurements were significantly different among 5 age groups. The height was decreasing by getting older while weight was increasing significantly. The 3 girth measurements(top bust, bust, under bust girth) in breast, bust width, bust depth were apt to increase definitely. The 3 girth measurements had high Correlation coefficients among 3 girth mesurements. Therefore, it is valid to pick out cup size and under bust girth for representative items of size chart. 2) Under bust girth and cup size were chosen as 2 axes of brassiere size chart. From the dual distribution table whose intervals had been determined by KS size chart, 17 sizes, which had more than 2% of appearance, were suggested for brassiere size chart. Through these new size charts, the suggested brassiere sizes covered 82.5% of all subjects. The suggested brassiere size chart would be more helpful than KS size chart in making the well-fitted brassiere.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.5
• /
• pp.655-666
• /
• 2013

Disposable protective coveralls that cover the entire face and body are essential for operations in contaminative or dangerous environments. This research studied disposable protective coveralls on Korean market in order to improve the products that agricultural workers wear. We investigated the size specifications of 22 disposable protective coverall products sold in Korean markets and analyzed how well the size specifications cover Koreans' sizes by comparing and analyzing the size specifications with Korean body measurements and Korean standards for protective clothing. We analyzed the consistency, regularity, and fitness to body measurements of Koreans for each size by measuring the sizes of 15 different parts for 22 products each. Current disposable protective coverall products for the Korean market are unsuitable for Korean body measurements, especially women's. It was expected that wearers would be unable to choose products that fit their bodies well just by the offered size specifications due to a lack of regularity between the measurements for each size. In this result, it was assumed that the development of KS standards and the coverall pattern that reflect the body measurements of Koreans are needed.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.617-627
• /
• 2020

This study investigates the apparel sizing communication presented in online retail websites focusing on women's ready-to-wear tailored jackets and to analyze the meaning of these information as the actual product size guide factor. A total of 34 retail websites were selected based on the highest growth fashion companies list and the best fashion brands list. We collected size information in two types: size specifications including sizing code, body measurements, garment measurements, and size references including customized size guide tools, size information in customer reviews, model size information, and others. Most websites prefer to present garment measurements rather than body measurements that are recommended notations under Korean standards and related regulations. In addition, there was the absence of consistency in presenting measurements list and terms that can confuse consumers in size communication. This study found that the stature measurement was a key factor in size reference despite that it did not represent a proper garment size. The obsolete Korean numbering sizing code such as '55 and '66 was still used in many ways such as idiomatic expressions for body shape. It also implied that we can take advantage of the old sizing code for accessible size information. The finding of this study gives an in-depth diagnosis of current online sizing information problems and suggests useful basic data for developing online apparel size standards and marketing strategies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.1
• /
• pp.39-50
• /
• 2013

This study estimates the measurements required to make garments but omitted from Size Korea 2010. Before the estimation of the measurements, the differences of the measurement methods were reviewed through previous research related to clothing construction and various measurement protocols that include previous Size Korea 2010 projects and ISO. The research target was 308 females aged 20 to 30 who lived in Seoul and the surrounding Gyeonggi province. A total of 43 measurements were obtained by the direct measurement method and analyzed in this study. In addition, 17 measurements which differ from the measurement method were also measured directly. These 17 measurements items were waist height, waist back height, waist height natural indentation, body rise, rise length, waist back length 1 & 2, posterior shoulder length 1 & 2, arm length 1 & 2, upper arm circumference 1 & 2, elbow circumference 1 & 2, and waist circumference 1 & 2. To analyze the differences in measurements, the subjects were divided into 2 age groups (20's and 30's). The results were as follows: First, there were big differences in stature, waist height, shoulder length, total length, and neck shoulder point to breast points by age groups; however, there were no differences in 17 measurement (such as shoulder angles) by age groups. Second, it was determined that 'waist circumference 1 & 2', 'waist back length 1 & 2', 'arm length 1 & 2', 'elbow circumference 1 & 2', 'upper arm circumference 1 & 2' and 'body rise & rise length' had significant differences by measurement methods in the entire group as well as each age group. Third, the values of 8 measurements omitted from Size Korea 2010 were estimated using similar measurements. The results of the correlation analysis were utilized to select reasonable independent measurements. Finally, 10 regression equations were obtained by regression analysis; subsequently, these will be useful for estimation of omitted measurements in Size Korea 2010.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.2
• /
• pp.233-253
• /
• 2024

This study analyzed differences between three-dimensional (3D) body scanning and manual measurements, aiming to assess whether 3D scanning can replace traditional anthropometric tools, such as tape measures and calipers. Data from 4,478 participants in the 8th Size Korea Project were analyzed, covering 43 measurement items. Since Given that the 3D and manual measurements were performed on the same subjects in the 8th Size Korea Project, it was possible to determine the correlation more accurately between the two measurement methods more accurately. Using Applying ISO 20685-1(2018) standards, 15 out of the 43 items fell within allowable error limits. When classified into six types, "small circumferences" and "segment lengths" showed averages of 3.35 mm and 3.10 mm, respectively, within acceptable range. "Body heights" and "body depths" slightly exceeded the limit, with averages of 5.28 mm and 6.58 mm. "Body widths" and "large circumferences" surpassed the limit, with means of 16.77 mm and 16.18 mm. The study offers an objective basis to for validate validating 3D measurements' measurements' reliability and accuracy, addressing various industries' needs for information on the human body's dimensions information.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.43-59
• /
• 2017

This study used data from a survey of adult Korean women in their twenties to learn their current practices for wearing and purchasing tight-fit jeans available on the market as well as perceptions regarding size measurements and satisfaction levels. We then determined product sizes and pattern measurements for the type of jeans worn. This study also analyzed discrepancies in product size measurements among brands to determine whether the measurements were generally suitable for average body shapes and measurements of women in their twenties. The study results were as follows. First, the survey asked women in their twenties about current practices in wearing jeans. Many respondents answered that their preferred fit is "a perfectly snug fit" and that the most common fit style of jeans was the skinny fit. Second, we selected a test pair of jeans with an identical fiber content from brands that women prefer to wear, according to the survey results. We researched the product measurements of the size respectively labeled 27 inches for each of the 8 brands' test jeans; consequently, the results showed that there were significant differences among the brands in the product measurements of each part of jeans. Third, we analyzed the pattern measurements of 8 selected brands for each area and identified pattern characteristics by brand.

• Fashion & Textile Research Journal
• /
• v.10 no.1
• /
• pp.83-91
• /
• 2008

This study was designed to figure out the changes in elderly women's foot size and shape by aging, to propose size specification for elderly women's shoes, and to produce regression equations using representative measurements items to estimate other measurements usually hard to get. Subjects were 118 women of 30-59 years and the 227 elderly women over 60 years. Martin's anthropometry was done on the right foot of each subject for 25 items. And 11 indirect measurement items were measured on both foot printing sole outline and picture in profile taken by digital camera. For statistical analysis on the anthropometric measurements by SPSS program, analysis of variance, post-hoc test(SNK-test), crosstabulation, multiple correlation analysis, regression analysis were performed. The results of the study are as follows. Firstly, it was found that the foot figures of elderly women over 60 years were smaller in girth and width than those of below 60 years. In addition, it was revealed that a big toe and a little toe of elderly women showed a tendency concentrating to the central axis of feet. The foot index of elderly was smaller in width and girth. Secondly, foot size distribution table of elderly group showed wider size ranges and covered smaller sizes than the below the age of 60, meaning wide variation in foot size of elderly women. Thirdly, the multiple correlation analysis showed high correlation of foot length/girth to other measurements, suggesting these two items could be used as representative items for elderly women's shoe size specification as other age groups. Regression equations were produced using foot length/girth to estimate other measurements, suggesting such items could be estimated effectively and utilized in on/off-line shoe manufacturing shop as heel to big toe length, heel to little toe length, exterior malleouls width, instep girth, ankle girth, etc. These results imply prudent features of elderly women's foot as diversity of foot shape and wide size specification range should be applied for ergonomic shoe design for them.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.988-1001
• /
• 2018

The head and face are the most complicated structures of the human body. However, unlike apparel products, many of the head and face related products are produced in unisex or one-size-fits-all. Therefore, it is necessary to provide a practical analysis that reflects these size structures. This study analyzed head and face measurements of men, women, and both men and women; its purpose lying in clarifying the differences and commonalities between the measurements of men and women and discovering the possibility of integrating analysis on measurements of men and women. 3D face and head measurement data of men and women from 20 to 29 years-old from Size Korea's 6th human body size data were analyzed for this study. The mutual 9 factors were extracted as the results of the three factor analyses (both men and women) separately and men and women integrated. However in the cluster analysis based on the 9 factors, men and women showed mutual characteristics and different landscape in group types and distribution. The commonalities and differences between men and women observed in this study should be applied to the sizes of head and face products.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.24 no.3
• /
• pp.111-125
• /
• 2022

Recently, the MZ generation has been leading overall fashion trends, and fashion companies focus on design, marketing, and new products targeting the MZ generation. However, it is expected that a fit problem may occur if the M and Z generations are combined when producing clothing. Therefore, this study aims to analyze the differences between the two groups by comparing the body size according to the classification of the M and Z generations. In addition, this study analyzes whether the body shape of the MZ generation is different from the past generations and analyzes major changes in body size for clothing manufacturing through graphical visualization. As for the research method, a t-test was conducted to verify the significant difference between the measurements for each age group. Generation M was defined as those who are 27-39 years old, and Generation Z was defined as those who are 20-26 years old. In order to examine the changes in body measurements according to the measurement year, the 7th Size Korea and 8th Size Korea data were analyzed. In order to examine the visual changes according to the measurement year and age group, major measurements of clothing construction were analyzed. As a result, it was found that Generation M had a significantly higher height item than Generation Z. Also, in terms of circumference, width, and thickness, Generation M was larger than Generation Z. But the size of the bra cup was larger in Generation Z than Generation M. As a result of analyzing the body size changes, in the height item, the 8th Size Korea measurements were found to be significantly higher in shoulder height and navel level waist height. In the length and circumference items, the 8th Size Korea measurements were larger than the 7th. In the width, thickness, and other items, the 8th measurements were larger than the 7th.