• Journal of Crop Science and Biotechnology
• /
• 제11권2호
• /
• pp.127-134
• /
• 2008

Tobamoviruses are the major viral pathogens of tomato and bell pepper. The preliminary results showed that Acibenzolar-Smethyl(ASM; S-methylbenzo(1,2,3) thiadiazole-7-carbothiate) pre-treatment to tomato and tobacco plants reduces the concentration of Tomato mosaic tobamovirus(ToMV) and Tobacco mosaic tobamovirus(TMV) in tomato and bell pepper seedlings, respectively. Pre-treatment of the indicator plant(Nicotiana glutinosa) with the ASM followed by challenge inoculation with tobamoviruses produced a reduced number and size of local lesions(67 and 79% protection over control to TMV and ToMV inoculation, respectively). In order to understand the mechanism of resistance the gene expression profiles of antiviral genes was examined. RT-PCR products showed higher expression of two viral resistance genes viz., alternative oxidase(AOX) and RNA dependent RNA polymerase(RdRp) in the upper leaves of the ASM-treated tomato plants challenge inoculation with ToMV. Further, the viral concentration was also quantified in the upper leaves by reverse transcription PCR using specific primer for movement protein of ToMV, as well as ELISA by using antisera against tobamoviruses. The results provided additional evidence that ASM pre-treatment reduced the viral movement to upper leaves. The results suggest that expressions of viral resistance genes in the host are the key component in the resistance against ToMV in the inducer-treated tomato plants.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1367-1370
• /
• 2005

Microcellular foam processing of polymers requires a nucleated cell density greater than $10^9\;cells/cm^3$ so that the fully grown cells are smaller than 10 mm. A microcellular foam can be developed by first saturating a polymer sample with a volatile blowing agent, followed by rapidly decreasing its solubility in the polymer. In general, the cellular structure of crystalline polymer foams is difficult to control, compared to that of amorphous polymer foams. Since the gas does not dissolved in the crystallites, the polymer/gas solution formed during the microcellular processing is nonuniform. Moreover, the bubble nucleation is nonhomogeneous because of the heterogeneous nature of the crystalline polymer. In this paper, the effects of the crystallinity and morphology of crystalline polymers on the microcellular foam processing and on reflectivity of products are investigated. First, polymer specimens with various morphology and amount of solved blowing agent were prepared by varying the saturation pressure, saturation time and foaming condition. Then, cell morphologies according to several conditions were studied. The specimens with differing gas amount of solved and morphologies were foamed and their cellular structures were compared. The experimental results of reflectivity are compared to raw specimen and another specimen of different experimental conditions. After the experiments, recognize whether how reflectivity changes according to solved gas amount. And the effect of cell density and cell size on reflectivity is studied

• 펄프종이기술
• /
• 제47권4호
• /
• pp.66-75
• /
• 2015

Disposable diaper waste is consisted of plastic, fiber, and SAP (Super Absorbent Polymer). They are valuable to be used as raw materials of other products including plastic blocks and pulp mold. Nevertheless, disposable diaper waste have been disposed by landfill and incineration without recycling. Due to strict environmental regulations it is necessary to develop fractionation technique to recycle the disposable diaper waste. In this study the fractionation technique using pilot-scale stock preparation units was investigated. Process for separation of plastic and fibers from disposable diaper waste was composed by the combination of pilot-scale pulper, drum screen, screen and cleaner. Recovery rate of plastics and fiber was checked according to the various operating conditions. In drum screen, recovery rate of plastic was high when the cut size of disposable diaper waste was $5cm{\times}5cm$. The highest recovery rate of fiber was achieved with 0.3 mm slot screen. It is important to control the neutral state of SAP for improvement of recovery rate of fiber since SAP can be swelled easily in water. Therefore SAP can be controlled efficiently by the addition of calcium chloride into the pulper. Consequently recovery rates of plastics and fibers were over 90 and 80% under the optimum pilot operating conditions.

• 한국발생생물학회:학술대회논문집
• /
• 한국발생생물학회 2003년도 제3회 국제심포지움 및 학술대회
• /
• pp.64-64
• /
• 2003

The sex differentiation of fishes occurs under the control of genetic and various environmental factors. DM-domain containing genes are novel zinc finger transcription factors and play key roles in sex determination. In order to isolate the wrasse DMRT (wDMRT) cDNA from the protogynous wrasse (Halichoeres tenuispinnis), the wrasse testis cDNA library was screened using the $^{32}$ P-labeled PCR products, which were amplified with the degenerate primers from conserved DM-domain regions of several DMRT genes. Among a few positives obtained through screening, the full length wDMRT cDNA of 2.9kb size encoding a predicted 300 amino acid residues was isolated. The sequence analysis exhibited 60%, 43% sequence identity with rainbow trout and tilapia DMRT1, respectively. RT-PCR assay showed that wDMRT was expressed specifically in male testis. Also, wDMRT gene was strongly expressed in May during reproductive season, when the reproductivity of wrasse is most active. This results suggested that wDMRT gene function in testis differentiation The conserved DM-domain regions were amplified using PCR from DMRT genes of several species among Labridae, and their sequences were determined. The sequence of DM-domain region of Halichoeres. tenuispinis was identical to those of Pseudolabrus japonicus, Pteragogus flagellifera, and showed 94% identity with that of Halichoeres poecioptrerus.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1859-1864
• /
• 2004

An effective methodology is reported for the optimal design of multisite batch production/transportation and storage networks under uncertain demand forecasting. We assume that any given storage unit can store one material type which can be purchased from suppliers, internally produced, internally consumed, transported to or from other plant sites and/or sold to customers. We further assume that a storage unit is connected to all processing and transportation stages that consume/produce or move the material to which that storage unit is dedicated. Each processing stage transforms a set of feedstock materials or intermediates into a set of products with constant conversion factors. A batch transportation process can transfer one material or multiple materials at once between plant sites. The objective for optimization is to minimize the probability averaged total cost composed of raw material procurement, processing setup, transportation setup and inventory holding costs as well as the capital costs of processing stages and storage units. A novel production and inventory analysis formulation, the PSW(Periodic Square Wave) model, provides useful expressions for the upper/lower bounds and average level of the storage inventory. The expressions for the Kuhn-Tucker conditions of the optimization problem can be reduced to two sub-problems. The first yields analytical solutions for determining lot sizes while the second is a separable concave minimization network flow subproblem whose solution yields the average material flow rates through the networks for the given demand forecast scenario. The result of this study will contribute to the optimal design and operation of large-scale supply chain system.

• Preventive Nutrition and Food Science
• /
• 제13권1호
• /
• pp.23-27
• /
• 2008

The Korean native black pig (KNP) have several desirable meat qualities, which are highly demanded by Koreans in spite of its slow growth rate, low feed efficiency, and small litter size. The aim of this study was to evaluate meat quality and fatty acid composition of KNP at different slaughter weight in order to provide information to industry. Ninety female KNP of the same age (220 days) were divided into three groups by live body weights (30 pigs per each group); live weight of 50$\sim$59 kg (T1), 60$\sim$69 kg (T2) and 70$\sim$80 kg (T3), respectively. After slaughtering the longissimus dorsi muscle (LD) and backfat from each group were obtained after 24 hr chilling. Crude protein content and shear force of LD from T3 was higher than that from T1 and pH of LD was significantly lower in that from T1 than from T2 and T3. Color measurement indicated that LD of T2 group had a higher $L^*$-value and lower $a^*$-value than those of T1 and T3. Slaughter weight of KNP generally did not affect the fatty acid composition of LD and backfat but the content of oleic acid (C18:1) of T2 in LD was significantly higher than those of T1 and T3. The results may provide basic information to industry to promote the production and processing of KNP, and assist in meeting the Korean consumer's demand.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.158-166
• /
• 1999

The purpose of this study was to investigate the correlation between airborne total dust and man-made mineral fibers (MMMF), and to estimate total dust concentration to maintain below the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV$^{(R)}$) for the MMMF. The regression coefficients between airborne total dust concentrations and fiber concentrations determined in the industries producing glass fibers, rock wool. refractory ceramic and continuous filament glass fibers products were 0.41, 0.42, 0.20 and 0.19, respectively. The size characteristics of fibers as well as the amounts of contaminated non-fibrous dusts could affect the correlation intensities. When total dust and fiber exposure data were compared with the occupational exposure limits, there was a large gap between two evaluation results. The regression coefficient between total dust and fiber data was increased ($r^2=0.88$) in the process of insulation installation generating in the higher levels of glass or rock wool fibers. In this case, an estimated total dust concentration of glass wool or rock wool fibers complying with the ACGIH TLV (1 f/cc) was $1.7mg/m^3$. In conclusion, the total dust and fibers concentrations was highly correlated at the higher exposure levels so that total dust-monitoring data could be used to control simply and economically and to estimate worker's exposure to fibers.

• 한국발생생물학회지:발생과생식
• /
• 제23권4호
• /
• pp.367-375
• /
• 2019

Pufferfish (Takifugu spp.) are economically important edible marine fish. Mistakes in pufferfish classification can lead to poisoning; therefore, accurate species identification is critical. In this study, we used the mtDNA cytochrome c oxidase subunit I gene (COI) to design specific primers for six Takifugu species among the 21 domestic or imported pufferfish species legally sold for consumption in Korea. We rapidly and simultaneously identified these pufferfish species using a highly efficient, multiplex polymerase chain reaction (PCR) system with the six species-specific primers. The results showed that species-specific multiplex PCR (multiplex species-specific polymerase chain reaction; MSS-PCR) either specifically amplified PCR products of a unique size or failed. MSS-PCR yielded amplification fragment lengths of 897 bp for Takifugu pardalis, 822 bp for T. porphyreus, 667 bp for T. niphobles, 454 bp for T. poecilonotus, 366 bp for T. rubripes, and 230 bp for T. xanthpterus using the species-specific primers and a control primer (ca. 1,200 bp). We visualized the results using agarose gel electrophoresis to obtain accurate contrasts of the six Takifugu species. MSS-PCR analysis is easily performed and provides identification results within 6 h. This technique is a powerful tool for the discrimination of Takifugu species and will help prevent falsified labeling, protect consumer rights, and reduce the risk of pufferfish poisoning..

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.690-693
• /
• 2002

According to the growth of communication biz, embedded market rapidly developing in domestic and overseas. Embedded system can be used in various way such as wire and wireless communication equipment or information products. There are lots of developing performance applying speech recognition to embedded system, for instance, PDA, PCS, CDMA-2000 or IMT-2000. This study implement minimum memory of speech recognition engine and DB for apply real time embedded system. The implement measure of speech recognition equipment to fit on embedded system is like following. At first, DC element is removed from Input voice and then a compensation of high frequency was achieved by pre-emphasis with coefficients value, 0.97 and constitute division data as same size as 256 sample by lapped shift method. Through by Levinson - Durbin Algorithm, these data can get linear predictive coefficient and again, using Cepstrum - Transformer attain feature vectors. During HMM training, We used Baum-Welch reestimation Algorithm for each words training and can get the recognition result from executed likelihood method on each words. The used speech data is using 40 speech command data and 10 digits extracted form each 15 of male and female speaker spoken menu control command of Embedded system. Since, in many times, ARM CPU is adopted in embedded system, it's peformed porting the speech recognition engine on ARM core evaluation board. And do the recognition test with select set 1 and set 3 parameter that has good recognition rate on commander and no digit after the several tests using by 5 proposal recognition parameter sets. The recognition engine of recognition rate shows 95%, speech commander recognizer shows 96% and digits recognizer shows 94%.

• Journal of Nutrition and Health
• /
• 제46권2호
• /
• pp.186-196
• /
• 2013

The objective of this study was to develop a semi-quantitative food frequency questionnaire (FFQ) for an adult population for use in the Korea National Health and Nutrition Examination Survey (KNHANES). The 24-hour recall data for 2,939 subjects aged 19 years and over from the fourth KNHANES first year (2007) were used to extract the items included in the questionnaire. The FFQ items were developed by selection of major dishes based on the cumulative contribution rate, between-person variability based on the cumulative R2 of energy and 14 nutrients (carbohydrate, protein, fat, crude fiber, calcium, phosphorous, iron, sodium, potassium, vitamin A, thiamin, riboflavin, niacin, and vitamin C) and the number of consumers of each dish. In addition, the FFQ items were revised with analysis of 24-hour recall data of the fourth KNHANES second and third year (2008, 2009). Finally, 112 items were included in the FFQ and grouped as follows: rice (5 items), noodles and dumplings (6), breads and rice cakes (8), soups and stews (12), soybeans, eggs, meat and fish (23), vegetables, seaweed and potatoes (27), milk and dairy products (4), fruits (13), beverages (5), snacks (6) and alcoholic beverages (3). The food items of FFQ accounted for an average of 87.0% of energy and 14 nutrient intakes and also accounted for 81.7% of the between-person variability. The frequency range of the FFQ items was classified into nine categories (never or seldom, once per month, 2-3 times per month, once per week, 2-4 times per week, 5-6 times per week, once per day, twice per day and three times per day) and the portion size was divided into three categories (small, medium and large). We expect that this developed dish-based FFQ could be used in assessment of longterm dietary intakes of Korean adults.