• 한국산업정보학회논문지
• /
• 제21권3호
• /
• pp.1-6
• /
• 2016

LMS 알고리즘에서, 시간영역의 적응알고리즘은 입력신호의 고유치 분포 폭이 넓게 분포되면, 수렴속도가 느려지기 때문에 가변 스텝 사이즈가 많이 사용된다. 그러나 이 경우 많은 계산량이 필요하다. 본 논문에서는 시간영역의 적응 알고리즘을 변환영역에서 수행한다. 그리고 수렴성능 향상과 계산량을 줄이기 위하여 평균오차의 순시 절대 값을 exponential 함수에 적용한 새로운 알고리즘을 제안한다. 그리고 시스템 제너레이터를 이용하여 시뮬레이션 및 검증을 하였다. 그 결과 순시 절대 값에 비례하여 변화하는 가변스텝사이즈의 적응알고리즘이 기존의 알고리즘과 비교하여 보다 안정되고 성능이 우수함을 입증하였다.

• 대한토목학회논문집
• /
• 제29권1A호
• /
• pp.95-100
• /
• 2009

본 연구에서는 신속개방형 포장 콘크리트의 적정배합비를 도출하기 위한 실험을 실시하였다. 콘크리트 타설 후 8시간 후 교통개방을 하기 위해 조강제 및 조강시멘트를 사용하였으며 조강제의 적정 혼입량을 결정하기 위해 예비실험을 실시하였다. 이를 바탕으로 시멘트 및 잔골재율을 변수로 공기량, 슬럼프 경시변화, 응결시험, 압축강도, 휨강도 시험을 실시하였다. 실험 결과 8시간 목표 압축강도 21 MPa, 휨강도 3.8 MPa를 만족하는 신속개방형 교통개방 포장 콘크리트의 적정배합비를 도출하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권12호
• /
• pp.1755-1762
• /
• 2003

Two experiments were conducted to determine effects of particle size in total mixed ration (TMR) on performance of lactating cows. Three rumen cannulated Holstein cows were used in a $3{\times}3$ Latin square design for the metabolic experiment. The particle size of the diets was determined using the Penn State Particle Size Separator (PSPSS) and weighing the proportion of sample remaining on the top screen (19 mm diameter). The 3 treatments were short, medium or long diets (4.9, 24.2 and 27.8% of sample remaining on the top screen of the PSPSS, respectively). Nine farms in the Edmonton area were surveyed and the farms were placed into groups based on the particle size of the ration fed. The groups were short ${\leq}6%$, medium 7-12% and long ${\geq}13%$ of sample weight remaining on the top screen of the PSPSS. Dry matter intake was greater (p=0.07) for the medium diet than the long diet in the metabolic study and resulted in a higher (p=0.07) efficiency of milk production. On the commercial farms, a significantly (p=0.002) lower milk fat percentage was observed for the long diet compared to the short diet. The results of these studies confirm that forage particle size influences milk composition and milk fat was negatively correlated to TMR particle size.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권12호
• /
• pp.1647-1651
• /
• 2004

The follicles (1.8 to 7.8 mm in diameter) were recovered from the ovaries in marketed pigs and the number of granulosa cells, the diameter of oocytes obtained from different development stages of the follicles and follicular fluid levels were determined. Correlations between size measurements and cell counts as well as the diameter of antral follicles and oocytes were also investigated. The results indicated that, while expanding in size, follicle numbers decreased with a greater atretic proportion. Granulosa cells increased in numbers continuously and remained unchanged beyond the size of 200 ${mm}^3$ in non-atretic follicles, whereas a sudden drop of granulosa counts was observed in atretic follicles. Follicular fluid, on the other hand, linearly increased its volume with follicle size and differed little between those of non-atretic and atretic follicles. Diameters of oocytes in non-atretic follicles increased to its maximum when follicles expanded to 150 ${mm}^3$ and maintained its size during later follicular expansion. It is concluded that, for in vitro culture, the optimal size of porcine follicle should be between 150 to 180 ${mm}^3$if they are collected from pre-pubertal gilts of marketing size slaughtered in an abattoir.

• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-9
• /
• 2002

Garlic is one of the major seasoning vegetables in Korea and consumed mostly in a form of peeled cloves. Conventional Korean standards for garlic grading consist of four classes according to the size of bulb and its shape. Sorting and grading of garlic are manually done but could be in the process of automated mechanization using machine vision system in the near future. The proportion of mass of cloves in a garlic bulb to the volume of the bulb (g/ml) was determined to find out the best way of representing both the quantity and quality of cloves in each bulb. Garlic bulb was assumed as an ellipsoid and its major and minor axis and its height were measured to calculate its volume. The mass proportions and density of a garlic bulb and cloves were measured for four domestic varieties of garlic to propose it as a standard for Korean garlic grading machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.964-968
• /
• 1996

The demands of size and quality of large steel shaft forgings for ship building, power plant, steel plant, etc. are rapidly increasing, and some of these productions are manufactured from ingot weighing more than 300 tons. For use as rotating components. shafts require toughness, strength and homogeneity, and therefore are produced through a variety of heat treatments. According to the increase of ingot size, micro- and macrosegregation and also mass effect of the product increase. Thus, special care should be paid to the heat treatment of such large shaft forgings. In this paper, the heat treatment of large shaft forgings such as rotor and back-up roll is calculated using the commercial finite element code SYSWELD. Calculated distributions of temperature and phase are compared with experimental data. The continuous cooling transformation diagram, thermal and mechanical properites of each phase are used. The phase proportion, hardness and residual stress during water quenching are discussed.

• 전자공학회논문지B
• /
• 제33B권10호
• /
• pp.90-97
• /
• 1996

This paper presents an efficient parallel implementation and its performance evaluations of a SOFM neural netowrk on the multicomputer. We investigate the parallel performance as the size of a neural network N, the number of the patterns L, and the number of the processors p increase. We propose an analytica performance evaluation model for eac of the parallel implementations and verified the validity of the model through experiments. Analytical result show that the number of processors for a maximum speedup of the network decomposition nd the training-set decomposition increases in proportion to .root.N and .root.L, respectively. The performances of the both decompositions depend on the number of training patterns L and the size of the neural network N and, if L.geq.0.423N, the performance of trhe training-set decomposition is proved to be better than that of the network decomposition.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.317-323
• /
• 2020

본 연구에서는 수막설비에 사용되는 워터커튼 노즐의 형상 인자 변화에 따른 분사압력과 방사유량 그리고 액적의 평균크기의 상관관계를 분석하였다. 이를 위해서 노즐의 내부 직경과 폭을 변화한 총 5개(D5W3, D5W6, D5W8, D4W6 그리고 D7W6) 각각의 노즐을 제작하였으며, 액적 측정 실험 장치를 구성하여 노즐의 수력직경 변화에 따른 유량 계수와 액적의 분포 상수를 반복실험을 통하여 산출하였다. 그 결과 유량계수는 노즐의 직경과 폭이 증가함에 따라 수력직경의 0.79 지수승과 62.8의 상수값에 비례하여 증가하는 것으로 나타났으며, 평균 액적의 크기는 분사 압력의 -0.235 지수승의 크기로 감소하였다. 특히, 본 연구에서 정의한 액적의 분포상수는 수력 직경의 0.258 지수승과 244.21의 크기에 비례하여 증가하는 것으로 나타났으며, 동일 워터커튼 노즐에 대해서 분사압력의 크기가 증가할수록 평균 액적의 크기가 감소하는 것을 검증하였다. 본 연구 결과는 수막설비용 노즐의 형상 설계에 따른 유동 특성을 예측하기 위한 노즐의 분사압력, 방사유량 그리고 평균 액적크기의 설계 자료로 활용이 유용할 것으로 판단된다.

• 한국인쇄학회지
• /
• 제18권1호
• /
• pp.141-155
• /
• 2000

To examine how the difference of molecular weight distribution of cellulase influenced the beating process according to surface pore size of the fiber, high molecular weight enzyme and low one were applied to soft wood pulp, hard wood pulp, cotton linter pulp. Some enzymes with the distribution of low molecular weight penetrated into cellulose in the proportion of surface pore size and the results were negative as like : the low viscosity, decrease of refining Yield, decrease of fine fibers content and so on. But in cotton linter pulp in the small surface area, the fiber softness was increased and it had a positive result that the paper intensity was high. Other enzymes with the distribution of high molecular weight had an enzyme reaction on the most surfaces of cellulose. They were effective in eliminating the fuzz of hydrophile fine fibers and the freeness was increased.

• 한국주거학회논문집
• /
• 제6권2호
• /
• pp.57-67
• /
• 1995

The purpose of this study is to provide basic data for a desirable bathroom planning of apartments. This study explores the changes of the bathroom planning and analyzes the bathroom plans of the existing apartments. The collected data are 197 cases of the bathroom plans of the apartments (area:10-69 pyung) constructed in Kangnam Gu. Seoul between 1973-1993. where 47.624 households live. This study consists of an overview on the changes of the bathroom planning by the decade and findings on the bathrooms and dressing rooms of the present apartments. The numbers, location, size and proportion of the bathroom and dressing room and the direction of the bathroom door are examined in turn. For the better planning of the bathroom. factors like family size, life cycle, and manner of bathroom use should be analyzed in the future studies. The analysis of the bathroom plans of the apartments in the entire city of Seoul maybe a prerequisite to them.