• 한국의류산업학회지
• /
• 제21권5호
• /
• pp.677-686
• /
• 2019

This study helps out-size consumers purchase ready-made clothes and improve fitness by classifying the lower bodies of abdomen-obese adult males in their 20s and older; in addition, it creates a size system based on each size interval of obesity type. The criteria for the 559 male subjects surveyed in this study were over $25kg/m^2$ of BMI, over 90 cm of waist, and over 0.85 waist hip ratio. The results are as follows. First, the higher the age group, the higher the degree of abdominal obesity in each age group. The degree of obesity then decreases somewhat as their age increases; however, the risk of abdominal obesity also increases. Second, 3 clusters were categorized by cluster analysis, into abdominal obesity, larger oval-type, trapezoid-type and small cylinder-type. Third, the size system establishment according to lower-body types resulted in basic body sizes and reference body sizes being different according to types even in commonly-appeared size names in the sections of respective types. The above research findings show it is necessary to understand obesity types according to waist and hip sizes that represent basic sizes and to design patterns in consideration of the characteristics of obese body shapes when lower-half body clothes are designed among obesity groups.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.113-121
• /
• 1999

Diesel particulate matter is known to be one of the major harmful emissions produced by diesel engines. Diesel particulates are subject to diesel emission regulations and have lately become the focus in the diesel emission control technology. Thus, the aftertreatment system is adopted at the diesel engine exhaust to reduce the particulate emission. Although this benefit is recognized, it is not clear how the aftertreatment system influences quantitatively the particle size distribution distribution. In this study, the particle size distributions of diesel exhaust were measured using the scanning mobility particle sizer with and without the aftertreatment system. There results showed that the diesel particulate filter and plasm system reduced the number of emitted particles by more than 90% and about 80% respectivley in the particle size range of 20nm∼600nm. On the other hand no significant effect of the diesel oxidation catalyst on the particle number concentration was detected.

• 한국수산과학회지
• /
• 제54권5호
• /
• pp.798-807
• /
• 2021

The directivity characteristics of acoustic transducers for conventional single-beam echo sounders considerably limit the detection of fish-size information in acoustic field surveys. To overcome this limitation, using the split-aperture technique to estimate the direction of arrival of single-echo signals from individual fish distributed within the sound beam represents the most reliable method for fish-size classification. For this purpose, we design and develop a split-beam data acquisition and processing system to obtain fish-size information in conjunction with a 50-kHz single-beam echo sounder. This split-beam data acquisition and processing system consists of a notebook PC, a field-programmable gate array board, an external single-transmitter module with a matching network, and four-channel receiver modules operating at a frequency of 50-kHz. The functionality of the developed split-beam data processor is tested and evaluated. Acoustic measurements in an experimental water tank showed that the developed data acquisition and processing system can be used as a fish-sizing echo sounder to estimate the size distribution of individual fish, although an external single-transmitter module with a matching network is required.

• International Journal of Computer Science & Network Security
• /
• 제21권9호
• /
• pp.275-280
• /
• 2021

With the development of communication networks, the processes of exchanging and transmitting information rapidly developed. As millions of images are sent via social media every day, also wireless sensor networks are now used in all applications to capture images such as those used in traffic lights, roads and malls. Therefore, there is a need to reduce the size of these images while maintaining an acceptable degree of quality. In this paper, we use Python software to apply K-mean Clustering algorithm to compress RGB images. The PSNR, MSE, and SSIM are utilized to measure the image quality after image compression. The results of compression reduced the image size to nearly half the size of the original images using k = 64. In the SSIM measure, the higher the K, the greater the similarity between the two images which is a good indicator to a significant reduction in image size. Our proposed compression technique powered by the K-Mean clustering algorithm is useful for compressing images and reducing the size of images.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.140-144
• /
• 2002

In this paper, the plastic zone size ahead of the crack tip of DENT specimen and the crack growth length under cyclic loading were measured by ESPI system. These results of the plastic zone size measured by ESPI system were compared with the plastic zone size proposed by Irwin. The results of tile crack growth length measured by it were also compared with them measured by the image analysis system. It is confirmed that it is possible to measure the plastic zone and crack growth length.

• 산업경영시스템학회지
• /
• 제17권32호
• /
• pp.177-186
• /
• 1994

Economic Lot size decision is studied on this thesis foe the muti-product small batch production system. Even though economic lot size decision has been studied for the MRP system. this could be applied at the industry under the multi-product small batch production system because of very complicate and manager's lack of understand. Therefore, this technique is applied at the industry in order to minimize ordering cosy based on optimal quantity and period, and holding cost according to optimize inventory level under the muti-product small batch production system. After that, lot size decision technique is compared with lot size decision technique which has been used for analyzing and emphasizing productivity

• 대한가정학회지
• /
• 제40권7호
• /
• pp.119-127
• /
• 2002

Fitness of clothes becomes a major concern in apparel industry. In order to improve clothing fitness, it's very important to suggest a systematical sizing system. The Purpose of this study was to suggest a standard sizing system for junior-high school girls'lower clothes. The subjects were 402 middle-high school girls of 13 to 15 year-old. 4 clusters were categorized by cluster analysis and the sizing system was classified according to four lower body types. The size intervals of waist girth and hip girth were 3cm and 4cm respectively. The most frequent size were 64-86 in the short and small figure type 1,67-90 in the fattest figure type 2, 61-86 in the average size type 3 and 64-90 in type 4 taller than others types. The sizing system, which had frequencies more than 4%, was classified 9 cases, 11 cases, 8 cases and 9 cases respectively by lower body types. This result will contribute to clothing fitness of consumer and the amount of production.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.561-564
• /
• 2005

In this paper, we present a new JPEG (Joint Photograph Experts Group) compression architecture which compresses still image into fixed size of bitstream to use restricted system memory efficiently. The size of bitstream is determined by the complexity of image and the quantization table. But the quantization table is set in advance the complexity of image is the essential factor. Therefore the size of bitstream for high complexity image is large and the size for low complexity image is small. This means that the management of restricted system memory is difficult. The proposed JPEG encoder estimates the size of bitstream using the correlation between consecutive frames and selects the quantization table suited to the complexity of image. This makes efficient use of system memory.

• 반도체디스플레이기술학회지
• /
• 제3권4호
• /
• pp.45-49
• /
• 2004

We examined large particles and filter size effects of Central Chemical Supplying (CCS) system for STI-CMP on Light Point Defects (LPDs) after polishing. As manufacturing process recently gets thinner below 0.1 um line width, it is very important to keep down post-CMP micro-scratch and LPDs in case of STI-CMP. Therefore, we must control the size distribution of large particles in a slurry. With optimization of final filter size, CCS system is one of the solutions for this issue. The oxide and nitride CMP tests were accomplished using nano-ceria slurries made by ourselves. The number of large particles in a slurry and the number of LPDs on the wafer surface after CMP were reduced with decrease of the final filter size. Oxide removal rates slightly changed according to the final filter size, showing the good performance of self-made nano ceria slurries.

• 대한임베디드공학회논문지
• /
• 제17권3호
• /
• pp.177-183
• /
• 2022

To measure the size and weight of the fish, we developed an automatic fish size measurement system using a deep neural network, where the YOLO (You Only Look Once)v3 model was used. To detect fish, an IP camera with infrared function was installed over the fish pool to acquire image data and used as input data for the deep neural network. Using the bounding box information generated as a result of detecting the fish and the structure for which the actual length is known, the size of the fish can be obtained. A GUI (Graphical User Interface) program was implemented using LabVIEW and RTSP (Real-Time Streaming protocol). The automatic fish size measurement system shows the results and stores them in a database for future work.