• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.78-82
• /
• 2023

A fabrication of smart windows with controllable visible light transmittance in three steps by using λ/2 retardation films based on a reactive mesogen (RM) material and polarizing films is demonstrated. The phase retardation films with a Δn·d value of λ/2 (λ: wavelength) convert the direction of a traveling light to the optical axis of the film symmetrically. In this work, the retardation characteristics according to the RM thickness were evaluated and henceλ/2 phase retardation film can be fabricated. The phase retardation film with Δn·d of 276.1 nm, which is close to λ/2 (=275 nm @550 nm), was fabricated. The light transmittance of a smart window with the structure of (polarizing film)/(glass)/(alignment layer)/(λ/2 retardation film) was measured in the transmission mode, half mode and blocking mode. The evaluation results show that the transmittance of the smart window can be controlled in three steps with 35.8%, 27.8%, and 18.2% at each mode, respectively. In addition, by fabricating a smart window with a size of 15×200 mm², the feasibility of use in various fields such as buildings and automobiles was verified.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.121-133
• /
• 2023

The demand for cement and limestone crushed materials has increased many folds due to the tremendous increase in construction activities in Pakistan during the past few decades. The number of cement production industries has increased correspondingly, and so the rock-blasting operations at the limestone quarry sites. However, the safety procedures warranted at these sites for the blast-induced ground vibrations (BIGV) have not been adequately developed and/or implemented. Proper prediction and monitoring of BIGV are necessary to ensure the safety of structures in the vicinity of these quarry sites. In this paper, an attempt has been made to predict BIGV using artificial neural network (ANN) at three selected limestone quarries of Pakistan. The ANN has been developed in Python using Keras with sequential model and dense layers. The hyper parameters and neurons in each of the activation layers has been optimized using randomized and grid search method. The input parameters for the model include distance, a maximum charge per delay (MCPD), depth of hole, burden, spacing, and number of blast holes, whereas, peak particle velocity (PPV) is taken as the only output parameter. A total of 110 blast vibrations datasets were recorded from three different limestone quarries. The dataset has been divided into 85% for neural network training, and 15% for testing of the network. A five-layer ANN is trained with Rectified Linear Unit (ReLU) activation function, Adam optimization algorithm with a learning rate of 0.001, and batch size of 32 with the topology of 6-32-32-256-1. The blast datasets were utilized to compare the performance of ANN, multivariate regression analysis (MVRA), and empirical predictors. The performance was evaluated using the coefficient of determination (R²), mean absolute error (MAE), mean squared error (MSE), mean absolute percentage error (MAPE), and root mean squared error (RMSE)for predicted and measured PPV. To determine the relative influence of each parameter on the PPV, sensitivity analyses were performed for all input parameters. The analyses reveal that ANN performs superior than MVRA and other empirical predictors, andthat83% PPV is affected by distance and MCPD while hole depth, number of blast holes, burden and spacing contribute for the remaining 17%. This research provides valuable insights into improving safety measures and ensuring the structural integrity of buildings near limestone quarry sites.

• Structural Engineering and Mechanics
• /
• v.90 no.6
• /
• pp.551-568
• /
• 2024

The present study deals with static and dynamic behaviors including forced vibrations of an elastic rectangular nano plate on the two-parameter foundation. Firstly, the rectangular plate is assumed to be subjected to uniformly distributed and eccentrically applied concentrated loads. The governing equations of the problem are derived by considering the dynamic response of the plate, employing a series of the Chebyshev polynomials for the displacement function and applying the Galerkin method. Then, effects of the non-essential boundary conditions of the plate, i.e., the boundary conditions related to the shearing forces, the bending moments and the corner forces, are included in the governing equation of motion to compensate for the non-satisfied boundary conditions and increase the accuracy of the Galerkin method. The approximate numerical solution is accomplished using an iterative process due to the non-linearity of the unilateral property of the two-parameter foundation. The plate under static concentrated load is investigated in detail numerically by considering a wide range of parameters of the plate and the foundation stiffnesses. Numerical treatment of the problem in the time domain is carried out by assuming a stepwise variation of the concentrated load and the linear acceleration procedure is employed in the solution of the system of governing differential equations derived from the equation of motion. Time variations of the contact region and those of the displacements of the plate are presented in the figures for various numbers of the two-parameter of the foundation, as well as the classical and nano parameters of the plate particularly focusing on the non-linearity of the problem due to the plate lift-off from the unilateral foundation. The effects of classical and nonlocal parameters and loading are investigated in detail. Definition of the separation between the plate and the two-parameter foundation is presented and applied to the given problem. The effect of the lift-off on the static and dynamic behavior of the rectangular plate is studied in detail by considering various loading conditions. The numerical study shows that the effect of nonlocal parameters on the behavior of the plate becomes significant, when nonlinearity becomes more profound, due to the lift-off of the plate. It is seen that the size effects are significant in static and dynamic analysis of nano-scaled rectangular plates and need to be included in the mechanical analyses. Furthermore, the corner displacement of the plate is affected more significantly from the lift-off, whereas it is less marked in the time variation of the middle displacement of the plate. Several numerical examples are presented to examine the sensibility of various parameters associated with nonlocal parameters of the plate and foundation. Both stiffening and softening nonlocal parameters behavior of the plate are identified in the numerical solutions which show that increasing the foundation stiffness decreases the extent of the contact region, whereas the stiffness of the shear layer increases the contact region and reduces the foundation settlement considerably.

• Advances in aircraft and spacecraft science
• /
• v.11 no.1
• /
• pp.83-103
• /
• 2024

Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

• Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.240-255
• /
• 2024

Widas Reservoir is situated in an area of 570 ha in the Pajaran Village, Madiun Regency, East Java Province, Indonesia, playing an essential role in fisheries, with the average fish catch per year of about 283 tons/year. This study explores the standing stock, growth parameters, mortality, and exploitation rates of several dominant fishes in Widas Reservoir. This study was carried out from February to November 2019. Fish stocks were estimated using acoustic tools, fish catch records, and sizes collected by local enumerators. Fish length frequency sampling was conducted on several dominant fish species, such as Oreochromis niloticus, Barbonymus gonionotus, and Osteochilus vittatus. Based on the length-frequency data, estimating fish population dynamics, the fish population dynamics (infinitive length (L_∞) and growth coefficient (K)) estimation was run in a time series using the Fish Sock Analysis Tool, II (FISAT II) program package. Moreover, the estimation of natural mortality parameters, the fishing mortality parameter, and the exploitation rate was also performed. The approximated overall fish stock in the Widas Reservoir was about 79,848 kg, which lowered with the increase in water depth. Of particular concern, in the surface layer at a depth between 1-5 m, the fish stock reached 58,813 kg, while in the deeper zone (> 15 m), the value significantly lowered by about 98%, reaching 1,219 kg. These results indicate an overfishing in the Widas Reservoir. The value of the exploitation rate (E) of B. gonionotus was 0.748, O. niloticus 0.8, and O. vittatus 0.7, respectively, proving the overfishing states occurred in the study area. Therefore, regulations governing the number of catches and the use of fishing gear are crucial in Widas Reservoir, particularly the use of lift and gill nets with a mesh size of less than 2 cm.

• Korean Journal of Food Science and Technology
• /
• v.6 no.2
• /
• pp.98-108
• /
• 1974

Fourteen varieties of Korean chestnut were subjected to the test of adaptability for processing and the possibilities of colored products development. The fruit size of Korean chestnut ranged $11{\sim}18g$ and these small fruits could not be expected to be utilized for the processing of Marron glaces which requires larger size as $25{\sim}30g$. As the storge period is extended the discoloration tendency of chestnut flesh was increasingly developed, however, the fresh chestnut has shown layer-separating phenomenon and ragged surface of fruit which delivers disagreeable appearance to the finished product. The principal factors of discoloration occurred during processing were the behavior of tannin and darkening rate shown on flesh differed each other among varieties; the Chukpa and Yuma variety have exhibited the most serious discoloration and the Taab-b variety, the lightest. Taab-b variety in this connection could be expected to be available for Kanroni processing. For the industrialization of chestnut processing the flame-scorched peeling method is advisable. The capacity of this method is proportional to the square of scorching radius and highly flexible in controlling its performance. As for the processing of colored product, the sugar dehydration and coating and the sugar penetration method demand further study in basical views; however, the canned product of chestnut-redbean has shown the possibility of being utilized as a substitute for or paralleled use with the sugar-syruped canned product which so far has been considered as the only item of export to Japan.

• Korean Journal of Soil Science and Fertilizer
• /
• v.18 no.2
• /
• pp.177-188
• /
• 1985

To clarify the characteristics and genesis of clayey terrace soils in Yeongnam area, macro-morphological features and soil profile development indexes were investigated with the sequential soils in Yeongcheon (inland region) and in Yeongil (coastal region). The results are summarized as follows; 1. According to the physiogaphy and landuse, the terrace soils were discernible to well drained yellowish red (5 YR) profile of higher terrace (Bancheon series), moderately well drained reddish yellow (7.5 YR) profile of middle terraces (Upyeong and Hwadong series), and lower terraces (Deogpyeong and Geugrag series) which were moderately well to imperfectly drained by paddy-fication. 2. The roundness and sphericity of the gravels contained in the terrace deposits were ranged around 0.543-0.546 and 0.723-0.722, respectively. The rounded to well rounded gravels were resemble to typical alluvial origins. 3. The amount of clay minerals formed in the soil horizons per 100g of parent materials were 50.8-30.7g while the rates of the clay leached were 30.1-7.4%, and the higher terrace had the more leaching rates. 4. The index of profile development of the terrace soils ranged from 37.95 to 22.01 and the index were positively correlated with relative elevations of the soils. The rates of clay leaching were positively correlated with the ratios of clay in the illuvial horizons to elluvial horizons. 5. A similarity was observed among cumulative grain size curves of the terrace soils, but the patterns of recalculated silt free cumulative grain size curve of terrace deposits in Upyeong soils in Yeongil area were abruptly different from down layer that suggest the soil to have bisequum profile.

• Journal of Wetlands Research
• /
• v.2 no.1
• /
• pp.31-40
• /
• 2000

The flora, vegetation structure and physico-chemical characteristics of surface sediment were investigated in Paksil-nup wetland of Hapcheon-gun, Gyeongsangnam-do, Korea in 1990~1998. Ranges of the surface sediment characteristics such as pH, conductivity, organic matter, total nitrogen, available phosphorus, exchangeable K, exchangeable Ca, exchangeable Mg, and exchangeable Na were 4.36~4.34, $19.0{\sim}1260.0\;{\mu}mho\;cm^{-1}$, 0.01~6.35%, 0.001~0.14%, 0.01~0.31 mg/l00g, 1.01~13.98 ppm, 16.75~143.80 ppm, 0.93~14.85 ppm and 0.21~3.86 ppm, respectively. Percentages of the particle size such as sand, silt, and clay were 13.0~93.3%, 5.4~71.7%, and 0.5~37.5%, respectively. The flora of the study area was composed of 72 families, 182 genera, 223 species, 36 varieties and 2 form or total 261 kinds, and those were 45 kinds of vascular hydrophytes and 216 kinds of vascular hygrophytes. The life form of vascular hydrophytes was classified as 27 kinds (60%) of emergent plants, 8 kinds (18%) of submerged plants, 6 kinds (13%) of free-floating plants and 4 kinds (9%) of floating-leaved plants, respectively. The importance value of Salix nipponica was highest as 123.78 in the shrub and tree layers, and that of Trapa japonica was highest as 16.69 in the herb layer. The vegetation type was divided into two groups according to the association analysis. The vegetation of the littoral zone was classified into 7 associations according to the cluster analysis based on the coverage data. These results showed significant differences with those of stand ordination by correspondence analysis based on the species composition and by PCA based on the sediment properties. Factors affecting the distribution of the vascular hydrophytes and hygrophytes were the gradient of particle size, altitude, and water depth.

• Korean Journal of Environment and Ecology
• /
• v.23 no.6
• /
• pp.528-534
• /
• 2009

Styan's Grasshopper Warblers (Locustella pleskei) are vulnerable species distributed in East-Asia only. Its known breeding sites in Korea are remote islets including Hongdo Islet, Chilbal Islet, Mara Islet, and Chuja Islets, and, therefore, the breeding biology of this species is still poorly known. This study was conducted on Mara Islet (N $33^{\circ}$ 06', E $126^{\circ}$ 16') from May to September 2008 to investigate the breeding status and breeding site characteristics of the grasshopper warblers. A total of 11 breeding pairs and their nests were found on trees and shrubs at artificially planted forests and hedges of Pinus thunbergii. The grasshopper warblers preferentially utilized the shrub trees for nesting places, and major nesting trees were Camellia japonica, Pittosporum tobira and Pinus thunbergii as nesting trees. Average heights of nesting trees and nests were $2.77{\pm}1.10m$ and $1.75{\pm}0.56m$, respectively. The grasshopper warblers selected lower shrubs and trees for nesting than randomly selected ones around them, probably to avoid strong and prevailed winds in flat and un vegetated environments on Mara Islet. The shape of nests was a round bowl-type, and measurements of nests were $11.9{\pm}0.5cm$ in exterior nest diameter, $11.1{\pm}1.1cm$ in height of exterior nest, $5.8{\pm}0.4cm$ in interior nest depth, and 6.0cm in interior nest diameter. It incubated eggs until the early August on Mara islet, and incubation periods of Mara Islet was possibly later than that of other areas. Furthermore, the clutch size in the study area was three, and they laid smaller number of eggs than normal clutch size (4~5 eggs) reported in other areas. Although we could not observe any nest predator on this species in the study area, selective cutting and pruning of trees will diminish dense shrub layer of forests. Therefore, it may affect the breeding of this threatened species which prefers dense shrubs of artificially planted forest of Pinus thunbergii. This study suggests that detailed and consistent further research on breeding biology and habitats of the grasshopper warblers are needed to conserve and manage of Pinus thunbergii forests on Mara Islet as an important breeding site of Styan's Grasshopper Warblers.

• Horticultural Science & Technology
• /
• v.28 no.6
• /
• pp.996-1002
• /
• 2010

Flow cytometry (FCM) was used to measure the ploidy level of three different sports from 'Campbell Early' ($Vitis$ $labruscana$) grape. Results of the study showed different ploidy levels. FCM analysis for 'Campbell Early' grape which contains 2C DNA diploid cells showed single peak around 35-40 while 'Kyoho' grape with 4C DNA tetraploid cells had a different level of 70-80. However, analysis of the sports displayed a histogram with 2 peaks containing both 2C and 4C nuclei. There was no difference in histograms of 2C DNA flesh and pericarp; on the other hand, 4C DNA flesh type of sports had a different histogram from that of the 2C DNA pericarp. Chromosome numbers of diploid ('Campbell Early'), tetraploid ('Kyoho'), and three sports were counted under the microscope. 'Campbell Early' and 'Kyoho' have 38 and 76 chromosomes, respectively. Three different sports are mixoploids with mixtures of diploid and tetraploid cells. Microscopic observations of shoot apical meristems in sports from 'Campbell Early' grape were carried out to determine the type of plant chimera. 'Campbell Early' grape (diploid) and 'Kyoho' grape (tetraploid) showed that both had 2 tunica layers covering corpus cells, while the three different sports had tunica layers showing mostly oblique division. Most cells from 'Kyoho' grape were larger than 'Campbell Early' grape. Cells from L-2 and L-3 layers of the three sports were similar to 'Kyoho' grape in size, although all cells in L-1 surface layer were uniform in size like 'Campbell Early' grape. Results of FCM analysis indicated that both normal and polyploid cells could be intermixed in sports and could become mixoploidy consisting of diploid and tetraploid. All sports used in the tests were periclinal chimera plants with two distinct L-1 and L-2 cell layers. The result of this study suggests that all three sports which originated from 'Campbell Early' grape might be 2-4-4 type chimera formation.