• 제목/요약/키워드: Size Distribution Function

검색결과 597건 처리시간 0.025초

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

토양 코아 분석을 통한 화산 골프장의 조성된 그린에 대한 평가 (The Evaluation on the exiting greens of Hwasan Country Club by undisturbed Soil Core Analysis)

  • 이상재;허근영;심경구
    • 한국조경학회지
    • /
    • 제26권2호
    • /
    • pp.54-61
    • /
    • 1998
  • The subsurface environment of the root zone area can set the stae for "do or die" of the turfgrass plant. The good condition of the greens is verified by their physical properties. Therefore, this study was carried to evaluate on the existing green of Hwasan C.C. by undisturbed soil Core Anaysis. We completed the ISTRC SYSTEM BenchMarking of the undisturbed core samples taken from Green #1, Green #5, Green #9-"Best" area, and Green #9-"Stressed" area for the Hwasan C.C.. It was also our understanding that the greens were in "good" to "very good" conditioni. THe exception might be Green #9-"Stress" area, which was the stressed area. The stressed area was confined to a ridge across Green #9. The organic content test results comfirmed the development of organic layering in depth 0-2.5cm. For the amount of compaction in the upper root zones and te development of the green's respective organic layers, the infiltration rates were high in Green #1, Green #5, and Green #9 "Stressed" area. The depicted aerificaton hole might be the probable cause of the relatively high infiltraton rate. Green #9-"Best" area had a tested infiltration rate of 18.75cm/hr. Either this area had not been aerified, or the undisturbed sample did not contain a aerification cavity. The water retention capacity of the undisturbed samples was good. When the greens were first constructed, the original root zone mix had been relatively low water retention properties. And the bulk density and the porosity of the undisturbed samples were good. In the result, all the greens were similar except for the infiltration. Thus, we supposed that Green #9-"Stressed" area might be ainly influenced by the amount of irrigation water and the configuration of the green's surface. There had been a reduction in the amount of irrigation water as the water retention capacity in the greens was promoted. Especially, it had gradually become more of a problem as the green had matured in Green #9-"Stressed" area. Because Green #9-"Stressed" area was a ridge area. The reduction in the amount of irrigation water might be the probable cause of the stress in Green #9-"Stressed" area. Our final observation related to the soil texture and the particle size distribution of the sand. Though and sand contant of all the tested greens were good, the gravel content of them exceeded ISTRC Guidelines. In particle size distribution of the sand, the very coarse and the coarse content of all the tested greens exceeded, but the rest was insufficient. The stability is a function of the material retained on the 0.25mm mesh screen. But, the content of all the tested greens was very insufficient. Though all the greens was serviceable, the coarse root zone sands, such as the sand in the tested greens, tended to be "unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.;unstable". Thus, we recommend using a topdressing/aerification sand which should be more in line with ISTRC/USGA Guidelines.ines.

  • PDF

주요일간지의 건강관련기사내용 분석 (An Analysis on the Contents of the Health Related Articles in the Newspapers. (From the points of view of Health Education))

  • 김지미
    • 보건교육건강증진학회지
    • /
    • 제3권1호
    • /
    • pp.29-42
    • /
    • 1985
  • The purpose of this study was to evaluate the educatconal function of the health related articles. The health articles of the four major daily newspapers from Jan. 1st, 1980 to Dec. 31th, 1984 were used and examined for the study. Editorials were excluded. The major results were summarized as follows: 1. The total number of the health articles subjected to the study in the four major daily newspapers was 4,431. On the whole, the health articles were appeared most frequently in 1981. As for monthly distribution, the health articles were appeared most frequently on June.(9.3%). As for weekly distribution, the health articles were appeared most frequently on wednesday and saturday(50.8%). As for the subjects of content; the health articles related to the health & disease management were appeared most frequently(52.8%), but the health articles on industrial health were showed least frequently(0.6%). 2. Reviewing the chronological trend of the health articles, the frequency of appearance of the public health administration was tended to increase year by year, whereas that of enviornmental health, industrial health and population decrease relatively. As for appealing method, it was observed that the articles providing health information were steadily increasing. As for the motives of writing the health articles, there was a tendency that seasonal motive, symphosium & seminar and compaign were increasing, but motive of legislative action and administrative action were gradually decreasing. As for type of the health articles, it was observed that interpretation and research result were steadily increasing. As for the writer of the health articles, there was a tendency that writing by reporter was increasing, whereas writing by experts was decreasing. As for tone of head, the health articles written by identification statement was tended to increase. As for the appearance of photograph & cut, it was observed that the health articles excluding photograph & cut were increasing. 3. When contents were analyzed by subjects, for the purpose of providing information was used most frequently as appealing method for all subjects. As for the motive of writing, "from the interest of writers" was most frequent. As for the type of articles, interpretation type was most prevalent for the public health administration, enviornmental health, food hygrene & nutrition, population and health behavior, while contribution by experts was most frequent for the health & disease management. As for the size of articles, all subjects except the population were appeared most frequently on the column. size between 100㎠ and 199㎠.

  • PDF

GIS를 이용한 응급의료 진료권 분석: 서울시를 사례로 하여 (Analysis of the Emergency Medical Service Area Using GIS: the Case of Seoul)

  • 이희연;박미영
    • Spatial Information Research
    • /
    • 제12권2호
    • /
    • pp.193-209
    • /
    • 2004
  • 본 연구는 응급환자의 의료기관 이용 현황자료를 토대로 GIS를 이용하여 응급의료 진료권을 분석하는데 목적을 두었다. 진료권을 분석하기 위해 6개 응급의료센터를 사례로 선정하여 2003년 9-11월까지 내원한 환자의 주소 자료를 수집하였다. 해당 응급의료기관을 중심으로 하여 거리에 따른 내원환자의 분포 비율을 산출하여 진료권을 분석한 결과 해당 응급의료센터와 인접한 지역에 거주하고 있는 환자의 비율이 가장 높게 나타났다. 그러나 6개 응급의료센터의 1차 진료권의 범위는 상당한 차이를 나타내었는데, 이는 병상 규모 뿐만 아니라 인지도와 환자들의 선호도 등에 따라 응급의료센터의 진료권역이 달라짐을 말해준다. 본 연구에서는 서울시 응급의료 서비스의 공급 표면도를 구축하는 방법을 모색하였다. 32개 응급의료센터로 부터 거리에 따른 내원환자의 분포 비율을 가중치로 부여하여 거리조락에 따른 공급력 수준을 나타내는 개개의 커버리지를 구축한 후, 이를 지도 대수 연산을 통해 합성하였다. 이렇게 구축된 응급의료 서비스의 공급 표면도를 통해 응급의료 서비스 공급 수준은 공간상에서 상당한 차이가 나타나는 것으로 파악되었다.

  • PDF

공동주택단지 내 휘트니스 센터 시설현황 분석에 관한 연구 (The Present Status Analysis of Interior Planning in a Fitness Center Inside an Apartment Complex)

  • 조영연
    • 한국실내디자인학회논문집
    • /
    • 제14권4호
    • /
    • pp.87-94
    • /
    • 2005
  • Lately due to the sudden growth of the construction of an apartment complex in domestic market, many construction companies are eager to provide various public facilities to increase the apartment distribution rate. An introduction of a fitness center is popularized as a part of such development. There has been a continuing development in a private fitness based on analyzing the user's data. However a public fitness is quite different from the private in terms of a user's classification, preference rate, the pattern of use, and location which requires a different facility plan. Nevertheless, all these days a public fitness in an apartment house has been developed without a specific facility plan based on relevant materials. It is worried that such development would cause the facilities not to function as appropriate resident facilities and sink to idle ones. Therefore the purpose of this paper is to make the standard considered in facility planning in future and the base to guide an applying method. In the paper the present condition of fitness centers inside apartment houses has been compared to analyze the progress of the existing facilities and the appropriateness of the organization and the structure division. The result of the research shows that public resident facilities is not the place to perform passive role for fixed activities but one to form a community through the human relationship based on the facility. Therefore a fitness center inside the apartment complex have to be designed to provide service and leisure space as one of main community facilities for residents. To obtain this purpose, when choosing facilities of an apartment complex, first of all the residents' standard of living, apartment size, residents' distinction rate of age and sex, the needs of the times should be fully considered Secondly, the size of each facility space have to be decided based on the practical data analysis in facility use such as space preference, average staying time. Also, future living culture requires the change of the function and space according to the change of social values, so continuing research and data analysis are required to related to fitness center inside an apartment complex in order to present systematic approaching method and the paper will be expected to be a little step toward it.

Fuzzy 이론을 이용한 OFDM 시스템에서 PAPR 감소 기법 (PAPR Reduction Method of OFDM System Using Fuzzy Theory)

  • 이동호;최정훈;김남;이봉운
    • 한국전자파학회논문지
    • /
    • 제21권7호
    • /
    • pp.715-725
    • /
    • 2010
  • OFDM(Orthogonal Frequency Division Multiplexing) 시스템은 주파수 선택적 페이딩 채널에서 무선 고속 데이터 전송에 적합한 통신 방식이다. 본 논문에서는 기계 제어에 많이 사용되는 Fuzzy 이론을 이용하여 OFDM 시스템에서 문제가 되는 PAPR(Peak to Average Power Ratio)을 감소시키는 방법을 제안한다. PAPR을 줄이는데 Fuzzy 이론을 사용함으로써 경험적 실험과 반복에 의한 데이터를 사용하기 쉬우며, 하드웨어적인 측면에서 구현이 쉽고, 또한 보다 적은 연산량으로 쉽게 PAPR을 감소시킬 수 있다. 먼저 입력 신호를 부블록으로 나누고, Fuzzy를 이용하여 부블록의 PAPR을 낮추어 전체의 PAPR을 낮추어 전송하여 이를 수신단에서 복원하는 비교적 쉽고 간단한 알고리즘을 제안한다. 제안한 방식이 기존의 OFDM 시스템에 비하여 시스템의 연산량이 다소 증가하고 Fuzzy에 관한 정보를 따로 보내야 하는 단점이 있지만, PAPR 감소 측면에서 성능이 개선됨을 확인하였다. 제안하는 알고리즘의 성능을 평가하기 위해 CCDF(Complementary Cumulative Distribution Function)을 통하여 비교한다. 이 알고리즘에 따르면 QPSK와 16QAM 변조를 사용하여 시뮬레이션을 한 결과, Fuzzy 이론을 이용한 방법이 FFT 크기(N)=512, Oversampling=4인 경우 PR이 $10^{-5}$을 기준으로 각각 최대 약 2.3 dB와 3.1 dB의 PAPR 감소됨을 확인할 수 있었다.

다공성재를 통과하는 압축성 유체의 압력강하에 관한 실험적 연구 (Experimental Study of Pressure Drop in Compressible Fluid through Porous Media)

  • 서민교;김도헌;서찬우;이승윤;장석필;구자예
    • 대한기계학회논문집B
    • /
    • 제37권8호
    • /
    • pp.759-765
    • /
    • 2013
  • 동축형 전단 분사기의 액적분포 균일도 및 혼합성능을 개선하기 위해 고안한 액체로켓 엔진용 동축형 다공성 분사기의 개발에 앞서 다공성재를 분사기에 적용하기 위해 다공성재를 통과하는 압축성 유체의 압력강하 특성을 파악하였다. Non-Darcy 유동의 압력강하는 점성력과 관성력으로 인한 손실을 포함하는 Forchheimer 방정식을 이용하여 도출할 수 있으며, 이 때 다공성재의 형상인자인 투과율과 관성력의 영향을 나타내는 Ergun 상수를 이용하여 다공성재를 통과하는 압축성 유체의 압력강하를 예측할 수 있다. 본 연구에서는 다공성재의 압력강하 특성을 나타내는 투과율와 Ergun 상수를 작동유체의 압력강하에 대한 함수로 나타내었으며, 최종적으로 이를 일반화하여 pore의 크기에 따라 압력강하를 예측할 수 있는 관계식을 도출하였다.

우선순위 알고리즘을 적용한 상호연결 망 구조의 ATM 스위치 설계 (Design of ATM Switch-based on a Priority Control Algorithm)

  • 조태경;조동욱;박병수
    • 한국콘텐츠학회논문지
    • /
    • 제4권4호
    • /
    • pp.189-196
    • /
    • 2004
  • 최근 ATM스위치를 위한 대부분의 연구는 병렬 하드웨어 자체에 규칙성과 자체 라우팅 특성을 가지는 다단계 상호연결 네트워크에 근거하여왔다. 그러나 네트워크는 동시에 또는 병렬로 전송되지만 서로 충돌을 피찰 수 없다는 측면에서는 블러킹 네트워크라고 할 수 있는데, 주로 밴얀 네트워크가 그 구조에 사용되어왔다. 밴얀 형태의 스위치에 있어서 처리율을 증가시키고, 블러킹을 제거하기 위해서 즉 내부링크의 속도를 증가시키고, 모든 스위치 노드에 버퍼를 두고, 병렬로 다중 연결링크를 두고, 그 네트워크 전에 부하를 균등하게 하는 통 여러 가지 방법들이 사용되어 왔다. 따라서 본 논문에서는 모든 블러킹이 제거되고 하드웨어 복잡도를 향상시키기 위하여 재순환 선플?스체인지 네트워크의 사용을 제안하였다. 이 구성은 하드웨어 복잡도 면에서 한층 단순하여진 구조인 재순환 셔플?스체인지 네트워크와, 동일한 목적지로 전달되는 패킷들에 있어서 우선순위가 결정된 후 순위가 높은 패킷은 다음 네트워크로 보내고, 순위가 낮은 패킷들을 재순환하는 트리구조의 순위 네트워크로 구성된다. 전송된 패킷은 밴얀 네트워크에서 분할 및 합성 알고리즘을 통하여 자체 라우팅 방식으로 최종 목적지에 전송되도록 구성된다. 처리율과 대기 시간 및 버퍼 크기에 따른 패킷의 손실율은 통일한 부하에 따라 각 포트에 도달한 패킷들의 확률을 이항분포로서 적용된다. 이때, $50\%$의 부하 정도면 버퍼 사이즈 $B_{size}=15$이상 즉, 16이면 허용 가능한 손실윤을 나타낸다. 그러므로 본 논문은 하드웨어의 복잡도 측면에서 기존의 바이토닉 정렬기를 재순환 셔플잌스체인지 네트워크로 구성하여 단순화 시켰다.

  • PDF

광자선을 이용한 전신 및 반신조사의 선량분포에 관한 고찰 (A study on the dose distribution for total-body & hemibody irradiation using clinical photon beams)

  • 김진기;권형철;김정수;오영기;김기환;신교철;김정홍;박충기;정동혁
    • 한국의학물리학회지:의학물리
    • /
    • 제12권2호
    • /
    • pp.147-153
    • /
    • 2001
  • 방사선 전신 및 반신 조사방법을 방사선치료에 적용하여 균일한 선량 분포를 유도하고자 조사거리에서 선량측정, 조직결손에 따른 보상과 선량 보정 방법을 논의하였다. 의료용 선형가속기에서 발생된 6MV 광자선을 이용한 전신 조사시의 흡수선량을 결정하는, 선원과 조사면사이의 거리 변화에 따른 계산자료를 조사면의 중심축에서 고체 팬톰, RFA-7 물팬톰(Scanditronix, Sweden)에 대해 UNIDOS 전리함(PTW, Germany), THERADOS 전리함(Scanditronix, Sweden)을 이용한 측정으로 그 크기를 결정하였다. 조직보상체는 연판과 아크릴판을 이용하였다. 전신조사의 조건은 선원으로부터 380 cm의 거리에서 120 $\times$ 120 $cm^2$ ~ 152 $\times$ 152 $cm^2$ 의 조사면을 대상으로 하였다. 전신조사를 위한 기본 자료 측정에서 선원과 조사면의 거리 변화에 따른 흡수 선량 분포는 거리가 멀수록 더 증가하는 현상을 보였고, 조사면의 모서리부분은 약 10-20% 의 선량이 감소되었으나 굴곡좌위형 체위를 취함으로서 선량분포를 보완할 수 있었다. 연판과 아크릴판을 이용한 조직결손에 따른 보상체 제작으로 중심축 선량비를 $\pm$ 8% 이내로 감소시킬 수 있었다. 조직결손의 보상에 따른 선량계산을 고찰하여 임상 적용시 선량분포의 불균일성을 줄일 수 있었다.

  • PDF

국소 광적응 기능을 가지는 윤곽검출용 32x32 방사형 CMOS 시각칩의 설계 및 제조 (Design and Fabrication of 32x32 Foveated CMOS Retina Chip for Edge Detection with Local-Light Adaptation)

  • 박대식;박종호;김경문;이수경;김현수;김정환;이민호;신장규
    • 센서학회지
    • /
    • 제11권2호
    • /
    • pp.84-92
    • /
    • 2002
  • 국소 광적응 기능을 가지는 윤곽검출용 시각칩을 픽셀수 $32{\times}32$의 방사형 구조로 CMOS 공정기술을 이용하여 설계 및 제조하였다. 생체의 망막은 넓은 범위의 입력 광강도에 대해서 물체의 윤곽을 검출할 수 있다. 본 연구에서는 시세포, 수평세포, 쌍극세포로 이루어진 망막의 윤곽검출 기능을 모델링하여 윤곽검출용 인공시각칩을 설계하였다 국소 광적응을 위해 입력 광강도에 따라 수용야의 크기를 국소적으로 바뀌게 하였다. 아울러 단위셀을 방사형으로 배치함으로써 영상데이터의 양을 감소시킴과 동시에 칩의 중심부분으로 갈수록 해상도가 높아지도록 설계하였다. 설계된 칩은 $0.6\;{\mu}m$ double-poly triple-metal 표준 CMOS 공정기술을 이용하여 제조되었으며, HSPICE 시뮬레이션으로 성능을 최적화 시켰다.