• Journal of Korea Trade
• /
• v.27 no.1
• /
• pp.101-118
• /
• 2023

Purpose - Korea became a trillion-dollar trading country in 2011. With the exponential increase in Korea's trade volume over the past decades, trade-related administrative burdens per capita for Korea Customs became enormous, for which the government established the Single Window, a trade-facilitating system, in 2004 to enhance the efficiency of customs-clearing procedures for traders. This paper focuses on finding whether the Korean Single Window system affects the country's trade facilitation positively through an empirical methodology. Design/methodology - To find empirical evidence that Single Window affects trade facilitation for the customs-clearing procedure, this study assumes that a time-efficient environment enables the handling of the increase in trade volume, under which four independent variables related to import customs-clearing procedures and two dependent variables to import were adopted for empirical analysis. The import customs procedures are classified into four steps from port entry to declaration acceptance. To understand the relationship between variables, scattered plots and correlation coefficients were calculated. Eight hypotheses were set and underwent simple linear regression. The data for analysis were collected by Korea Customs, and were about the lead time of import, the volume of imports in million USD, and the number of import declarations reported to customs offices on a monthly basis from 2005 to 2013. Findings - Six of the eight hypotheses showed the statistically significant result that lead time in the import customs-clearing procedure positively affects the number of import declaration reports and import volume. Specifically, Hypothesis 1, Hypothesis 2, and Hypothesis 3 strongly support the assumption lead time in import customs declaration has an inverse relationship with the number of import declarations, which means that the shorter the import lead time, the more import declaration increases. Research Limitations/Implications - With limited data accessibility to the government's custom-sclearing procedures, only the import lead time for customs clearance were adopted as independent variables. This paper, however, successfully found that the Single Window system contributed to trade facilitation. Originality/value - This study found that the time-saving Single Window system of Korea Customs enables itself to manage an exponentially-increasing trade volume by creating a trade-facilitating environment for customs personnel and traders, which may be a unique implication found through quantitative methodology.

• Journal of Korea Port Economic Association
• /
• v.36 no.4
• /
• pp.17-30
• /
• 2020

In the shipping industry, it is essential to engage in the preemptive prediction of freight rate volatility through market monitoring. Considering that freight rates have already started to fall, the loss of shipping companies will soon be uncontrollable. Therefore, in this study, factors affecting the freight rates of bulk carriers, which have relatively large freight rate volatility as compared to container freight rates, were quantified and analyzed. In doing so, we intended to contribute to future shipping market monitoring. We performed an analysis using a vector error correction model and estimated the influence of six independent variables on the charter rates of bulk carriers by Handy Size, Supramax, Panamax, and Cape Size. The six independent variables included the bulk carrier fleet volume, iron ore traffic volume, ribo interest rate, bunker oil price, and Euro-Dollar exchange rate. The dependent variables were handy size (32,000 DWT) spot charter rates, Supramax 6 T/C average charter rates, Pana Max (75,000 DWT) spot charter, and Cape Size (170,000 DWT) spot charter. The study examined charter rates by size of bulk carriers, which was different from studies on existing specific types of ships or fares in oil tankers and chemical carriers other than bulk carriers. Findings revealed that influencing factors differed for each ship size. The Libo interest rate had a significant effect on all four ship types, and the iron ore traffic volume had a significant effect on three ship types. The Ribo rate showed a negative (-) relationship with Handy Size, Supramax, Panamax, and Cape Size. Iron ore traffic influenced three types of linearity, except for Panamax. The size of shipping companies differed depending on their characteristics. These findings are expected to contribute to the establishment of a management strategy for shipping companies by analyzing the factors influencing changes in the freight rates of charterers, which have a profound effect on the management performance of shipping companies.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.396-405
• /
• 2020

In this study, we used the big data of Voice of Customer (VOC) related to high-speed Internet products to look at the causes of perceived quality and the possibility of proactive service. In order to verify the possibility of proactive service, we collected VOC data from 13 facilities and equipment of a mobile communication service company, and then conducted 𝒙² test to verify that there was a statistically significant difference between the actual VOC observation values and expected values. We found statistical evidence that proactive service is possible through real-time monitoring for the six disability alarms among the 13 facilities and equipment, which are FTTH-R Equipment ON/OFF, FTTH-EV Line Error Detection, Port Faulty, FTTH-R Line Error Detection, Network Loop Detection, and Abnormal Limiting Traffic. Companies are able to adopt the proactive service to improve their market share and to reduce customer service costs. The results of this study are expected to contribute to the actual application of industry in that it has diagnosed the possibility of proactive service in the telecommunication service sector and further suggested suggestions on how to provide effective proactive service.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.85-90
• /
• 2015

Purpose - Global trends play a part to change the structure of the fashion industry. In particular, companies attempting to conduct innovative marketing centering on such products as SPA brands are growing into global companies. SPA stands for "Specialty Store Retailer of Private Label Apparel", meaning its activities are fully integrated from manufacturing through sales, including material procurement design, product, distribution, inventory management, and final sales. For this reason, more understanding of individual corporate profitability is very sensitive to consumer's attitudinal changes. The effects that corporate marketing activities on customer lifetime value through brand attitude were analyzed based on a structural equation model. Rust suggested value equity, brand equity, and relationship equity as customer equity driver. The study examines Chinese consumer because China is the fastest growing fashion market in the world. Research design, data, and methodology - The survey targeted Chinese college student age 20s. Only respondents who had purchased SPA brands in the past year were included for this research. A total of 303, except for 47 missing data of 350 distributed questionnaires were included in this research. The questionnaire is consists of six part to measure value, brand, relationship equity, attitude toward brand, purchase intention and demographic characteristics. This research conducted exploratory factor analysis and reliability test. To verify research hypotheses, structural equation model test was conducted. As for customer equity, diversified models in consideration of the scope of acquisition data, a method of collection of data, influencing factor, and predictability were suggested based on a net present value model. However, the history of customer equity study is relatively short, and sufficient empirical analyses have not been conducted, so more integrated analysis is required. In this study, the concept of driver suggested by Rust was applied to figure out the effects that consumer's attitude has on customer equity. The customer equity driver suggested by them consists of brand equity, value equity, and relationship equity. Results - This study reveals that value equity and brand equity have a positive influence on relationship equity. And, relationship equity has a positive influence on purchase intention through brand attitude. However, value equity and brand equity do not influence on brand attitude. Conclusion - The results of this research generated following implications. First, SPA brands need to take advantage of their value equity such as perceived low price and up-to-date fashion style to attract Chinese young consumer. Second, strong brand equity promises dominants position in the competitive market. As Chinese fashion market grows rapidly, SPA brands can consider branding strategy such as flagship store and celebrity marketing enhancing brand image. Third, the core concept of customer equity strategy is to maintain a relationship with their expecting and existing customers. The relationship equity is built by brand equity and value equity. When SPA brands serves product and service meet with individual customers, customers have intimacy to the brands.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.2
• /
• pp.251-271
• /
• 2008

Maquiladora industries have grown due to the decrease in labor costs caused by Mexico's economic crisis and the increase in possibility of Mexico's advance into North American markets caused by the NAFTA that come into effect since the 1980s and 1990s. Early Marquiladora industries have started to be located in the Northern borders of Mexico using young-female labor forces centered on the textile and electronic part industries. However, after the 1980s, the port soared, and the regional range of Maquiladora industries has also enlarged to 25 states. The most important regions of Maquiladora industries in Mexico are Chihuahua and Baja California and their cities are Ciudad Juares and Tijuana. Maquiladora industries had grown in terms of the cost of product and the employment until the end of the 1990s. However, Maquiladora industries have decreased in the cost of product and the employment since the 2000s. The regional range of Maquiladora industries has enlarged into the entire of Mexico, but most of Maquilador industries is still located in Northern border regions centered on six states. The textile industry is a representative one of Maquiladora industries and the early Maquilador industries have been focused on the textile industry. Thus, the textile industry in Maquiladora shows the same pattern as any other industries in Mexico. However, machinery and electronic part industries have been concentrated on the Northern border states and existing manufacturing zones. In terms of the change in employment by industry, machinery and electronic part industries occupied most high employment proportion and the textile industry sector was the next. The distinguished point is that service industries are growing.

• Journal of Korean Academy of Nursing
• /
• v.25 no.3
• /
• pp.472-484
• /
• 1995

The purpose of this study was to develop a home health care model in the public health system and to test the effectiveness of the model. Seven com-munity health practitioners in Yon- Cheon county. Kyunggi province, carried out home health care service for this research. The subjects of the home health care were a total of 111 community residents with chronic health problems and risk-prone infants and children; 29 persons with hypertension, 18 persons with diabetes, 12 persons with neurologic problems, 12 elderly, and 40 infants and children. During the period of study, from December, 1993 to March, 1995, a demonstrative home health care model was developed in the Yon-Cheon County community health centers with the cooperation of the Yon-Cheon Medical Center and Yon-Cheon Public Health Center for the first six months. A home care practice manual and recording system for home visits were also co-developed by the researchers and community health practitioners. Four workshops and monthly conferences were held for this purpose. Actual home care practice took place for two months, and on-going evaluation and replanning accompanied this process. The result of the evaluation of home care service were as follows. 1) For persons with hypertension, diabetes, neurologic problems, there was significant improvement in knowledge of disease and care, but no significant difference was seen in health behavior or symptoms after home care service. 2) No significant difference was seen in level of self esteem or depression after reminiscence therapy among 12 elderly subjects. 3) There were significant differences in satis-faction toward child rearing and parental sup-port, but no significant difference In education needs for parental role after home care service among parents of infants and children. 4) There was significant improvement in the quality of life among the subjects after the home care service. 5) Subjects responded that they were highly satisfied with the home care service given by the community health practitioners. Although, the actual implementation period was very short, and not all of the evaluation outcomes showed significant improvement, the home health care model of community health practitioners was, in general, positively evaluated. Through this re-search, the possibility of community health practitioners working as active home care personnel in the public health care system is supported. Further research with an expanded area and subjects for a longer period is recommended. Cost effectiveness research is also needed.

• Analytical Science and Technology
• /
• v.34 no.1
• /
• pp.23-35
• /
• 2021

In order to measure the volatile organic compounds (VOCs) of a sample which is too large to use commercially available chamber, a stainless steel vacuum chamber (VC) (with an internal diameter of 205 mm and a height of 50 mm) was manufactured and the temperature of the chamber was controlled using an oven. After concentrating the volatiles of the sample in the chamber by helium gas, it was made possible to remove residual volatile substances present in the chamber under reduced pressure ((2 ± 1) × 10-2 mmHg). The chamber was connected to a purge & trap (P&T) using a 6 port valve to concentrate the VOCs, which were analyzed by gas chromatography-mass spectrometry (GC-MS) after thermal desorption (VC-P&T-GC-MS). Using toluene, the toluene recovery rate of this device was 85 ± 2 %, reproducibility was 5 ± 2 %, and the detection limit was 0.01 ng L-1. The method of removing VOCs remaining in the chamber with helium and the method of removing those with reduced pressure was compared using Korean drinking water regulation (KDWR) VOC Mix A (5 μL of 100 ㎍ mL-1) and butylated hydroxytoluene (BHT, 2 μL of 500 ㎍ mL-1). In case of using helium, which requires a large amount of gas and time, reduced pressure ((2 ± 1) × 10-2 mmHg) only during the GC-MS running time, could remove VOCs and BHT to less than 0.1 % of the original injection concentration. As a result of analyzing volatile substances using VC-P&T-GC-MS of six types of cell phone case, BHT was detected in four types and quantitatively analyzed. Maintaining the chamber at reduced pressure during the GC-MS analysis time eliminated memory effect and did not affect the next sample analysis. The volatile substances in a cell phone case were also analyzed by dynamic headspace (HT3) and GC-MS, and the results of the analysis were compared with those of VC-P&T-GC-MS. Considering the chamber volume and sample weight, the VC-P&T configuration was able to collect volatile substances more efficiently than the HT3. The VC-P&T-GC-MS system is believed to be useful for VOCs measurement of inhomogeneous large sample or devices used inside clean rooms.

• Clinical Endoscopy
• /
• v.55 no.3
• /
• pp.417-425
• /
• 2022

Background/Aims: Endoscopic submucosal dissection (ESD) for diverticulum-associated colorectal lesions is generally contraindicated because of the high risk of perforation. Several studies on patients with such lesions treated with ESD have been reported recently. However, the feasibility and safety of ESD for lesions in proximity to a colonic diverticulum (D-ESD) have not been fully clarified. The aim of this study was to evaluate the feasibility and safety of D-ESD. Methods: D-ESD was defined as ESD for lesions within approximately 3 mm of a diverticulum. Twenty-six consecutive patients who underwent D-ESD were included. Two strategic approaches were used depending on whether submucosal dissection of the diverticulum-related part was required (strategy B) or not (strategy A). Treatment outcomes and adverse events associated with each strategy were analyzed. Results: The en bloc resection rate was 96.2%. The R0 and curative resection rates were 76.4% and 70.6% in strategy A and 88.9% and 77.8% in strategy B, respectively. Two cases of intraoperative perforation and one case of delayed perforation occurred. The delayed perforation case required emergency surgery, but the other cases were managed conservatively. Conclusions: D-ESD may be a feasible treatment option. However, it should be performed in a high-volume center by expert hands because it requires highly skilled endoscopic techniques.

• Journal of Korean Academy of Nursing
• /
• v.24 no.3
• /
• pp.413-431
• /
• 1994

The purpose of this study was to build a substantive theory about the experience of the family whose child has died of cancer The qualitative re-search method used was grounded theory. The interviewees were 17 mothers who had cared for a child who had died of cancer Traditionally in Korea, mothers are the care givers in the family and are considered sensitive to the family's thoughts, feelings. The data were collected through in-depth interviews by the investigator over a period of nine months. The data were analyzed simultaniously by a constant comparative method in which new data are continuously coded into categories and properties according to Strauss and Corbin's methodology. The 16 concepts which were found as a result of analyzing the grounded data were, -left over time, the empty place, meaninglessness, inner sadness, situational sadness, heartache, physical pain, guilt, resentment, regret, support / stigmatization, finding meaning in the death, changing attitudes about life and living, changing attitudes about health, changing religious practice and changing family relations. Five categories emerged from the analysis. They were emptiness, consisting of left over time, the empty place and meaninglessness ; sadness, consisting of inner sadness and situational sadness ; pain, consisting of heartache and physical pain ; bitterness, consisting of guilt, resentment, regret, sup-port / stigmatization and finding meaning in the death : and transition, consisiting of changing attitudes about life and living, changing attitudes about health, changing religious practice and changing family relations. These categories were synthesized into the core concept, -the process of filling the empty space. The core phenomenon was emptiness. Emptiness varied with the passing of time, was perceived differently according to support / stigmatization and finding meaning in the death, was followed by sad-ness, pain, and bitterness, and finally resulted in changes in attitudes about life and living and about health, and in changes in religious practice and family relations. The process of filling the empty space proceeded by ① accepting realty, ② searching for the reason for the child's death, ③ controlling the bitter feelings, ④ reconstructing the relationships ameng death, illness and health and ⑤ filling the emptiness by resolving causes of child's death, adopting, having another child or with work. Six hypotheses were derived from the analysis. ① The longer the bereavement, the mere the empty space becomes filled. ② The longer the hospitalization, the more sup-port the family needs. ③ The more the sadness, pain and bitterness are expressed, the mere positive changes emerge. ④ Family support faciliates the process of filling the empty space. ⑤ Higher family cohesiveness faciliates the process of filling the empty space. ⑥ The greater the variety of reasons attributed to the child's death, the greater the variety of patterns of change. Four propositions related to emptiness and bitter-ness were developed. ① When the sense of emptiness is great and bitterness is manifested by severe feelings of guilt and resentment, the longer the process of fill-ing the empty space. ② When the sense of emptiness is great and the family is highly motivated to get rid of the bitterness, the shorter the process of filling the empty space. ③ When the sense of emptiness is less and bitter-ness is manifested by severe feelings of guilt and resentment, the process of filling the empty space is delayed. ④ When the sense of emptiness is less and the family is highly motivated to get rid of the bitterness, the process of filling the empty space goes on to completion. Through this substantive theory, nurses under-stand the importance of emptiness and bitterness in helping the family that has lost a child through cancer fill the empty space. Further research to build substantive theories to explain other losses may con-tribute to a formal theory of how family health is restored after human tragedies are experienced.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.4
• /
• pp.41-54
• /
• 2002

In this study, we have analyzed the effects of the membrane layer and the bragg reflector layers on the resonance characteristics through comparing the characteristics of the membrane type FBAR (Film Bulk Acoustic Wave Resonator) and the one type bragg reflector layers with those of the ideal FBAR with top and bottom electrode contacting air by using equivalent circuit technique. It is assumed that ZnO is used for piezoelectric film, $SiO_2$ are used for membrane layer and low acoustic impedance layer, W are used for the high acoustic reflector layer and Al is used for the electrode. Each layer is considered to have a acoustic propagation loss. ABCD parameters are picked out and input impedance is calculated by converting 1-port equivalent circuit to simplified equivalent circuit that ABCD parameters are picked out possible. From the variation of resonance frequency due to the change of thickness of electrode layers, reflector layers and membrane layer it is confirmed that membrane layer and the reflector layer just under the electrode have the greatest effect on the variation of resonance frequency. From the variation of resonance properties, K and electrical Q with the number of layers, K is not much affected by the number of layers but electrical Q increases with the number of layers when the number of layers is less than seven. The electrical Q is saturated when the number of layers is large than six. The electrical Q is dependent of mechanical Q of reflector layers and membrane layer. Both ladder filter and SCF (Stacked Crystal Filters) show higher insertion loss and out-of-band rejection with the increase of the number of resonators. The insertion loss decreases with the increase of the number of reflector layers but the bandwidth is not much affected by the number of reflector layers. Ladder Filter and SCF with membrane layer show the spurious response due to spurious resonance properties. Ladder filter shows better skirt-selectivity characteristics in bandwidth but SCF shows better characteristics in insertion loss.