• Design & Manufacturing
• /
• 제11권2호
• /
• pp.1-8
• /
• 2017

In this study, we applied microcellular foaming injection molding process to improve the performance of system air-conditioner drain fan which had been produced by injection molding process and studied the optimization of process conditions through 6-sigma process and response surface method (RSM) to reduce weight and deformation of products. Additive type, melt temperature, mold temperature, and injection screw shape were selected as the factor affecting the weight and deformation of the products by carrying out analysis of trivial many through ANOVA and design of experiment (DOE) method. Among the effect factor, we set the addictive type to Long G/F and screw shape to foaming screw which had the highest level of weight reduction and deformation reduction. The amount of foaming agent gas was set at 60 ml, which was the limit beyond which the weight of product did not decrease any more. For melt temperature and mold temperature, we studied the conditions where both weight and deformation were minimized using the RSM. As a result, we set the melt temperature to $250^{\circ}C$, fixed mold temperature to $20^{\circ}C$, and moving mold temperature to $40^{\circ}C$. The improvement effect was analyzed by appling the selected optimal conditions to the production process using the microcellular foaming injection molding. The results showed that the mean weight of product was measured to be 1,420g which was 19% lower than that measured in the current process. The standard deviations of the weights were found to be similar to those in the current process and it showed a low dispersion. The mean deformation was measured to be 0.9237mm, which represented a 57% reduction compared to the mean deformation in the current process, and the standard deviation decreased from 0.3298mm to 0.1398mm. Moreover, we analyzed the process capability for deformation, and the results showed that the short-term process capability increased from 2.73 to 6.60 which was even higher than targeted level of 6.0.

• 디지털융복합연구
• /
• 제10권6호
• /
• pp.141-152
• /
• 2012

본 연구는 컨버전스 유형별 비즈니스모델 개발을 위한 혁신도구 비교 연구이다. 먼저 문헌고찰을 통하여 컨버전스 유형, 비즈니스 모델, 혁신도구에 대한 기존연구를 학습하고. 이를 근거로 컨버전스 환경 하에서 혁신적 비즈니스모델을 개발하기 위해 혁신도구를 이용한 비즈니스모델 개발 개념인 컨버전스-비즈니스-혁신도구 큐브(CBI Cube) 모형을 개발하였다. 이 개념의 구체화를 위해 전문가집단을 대상으로 한 델파이(DelPhi)기법과 AHP기법을 적용하여 CBI Cube 모형의 구성인자를 도출하고 비즈니스모델 개발을 위한 혁신도구의 상대적 우선순위를 비교하였다. 본 연구를 통해 기존 비즈니스모델의 벤치마킹이나 단순 모방의 수준을 넘어 가치혁신형 비즈니스 모델의 개발이 가능하게 되어 혁신 제품 서비스의 개발 및 혁신 시장개발에 보다 쉽게 접근할 수 있게 될 것을 기대한다.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.443-457
• /
• 1997

The purpose of this study was to evaluate the effects of ethanolic extracts of Scutellaria Radix on the alveolar bone formation in the extract socket of rat. Thirty-six Sprague-dawley rats were used in this study. Mean body weight of rat was $130{\pm}5g$. Experimental animal were administered 0.4% ,${\beta}-aminopropionitril$(Sigma, USA) with the solid commercial food for 5 days. All the maxillary 1st molar of the rats were extracted by using of the tissue forcep under the general anesthesia with Pentobarbital sodium(Tokyo Chemical Co, Japan) injection into intraperitoneal space. All the extracted rats were divided into two group, experimental group which were feeded the solid food mixed ethanolic extracts of Scutellaria Radix, and control group which were feeded same food without reagent. At 1, 3, 5, 7, 9 and 14th days after tooth extraction, rats in both groups were serially sacrificed respectively. All the specimen were treated as usual method and prepared Hematoxylin-eosin stain for the light microscopic observation. The results were as follows : 1. Bone formation of extracted socket starts from the area on remained periodontal ligament than other area. 2. In the case of administration of the extracted Scutellaria Radix showed rapid healing process of connective tissue than non-administrated group. 3. In the case of administration of the extracted Scutellaria Radixshowed rapid osteogenesis than non-administrated With above results, it was concluded that ethanolic extracts of Scutellaria Radix may play a favorable role on the healing process of exatraction socket after extraction in rats. It was suggested that further study to evaluate the different concentration and administration method of ethanolic extracts of the Scutellaria Radix into same experimental model.

• 정보처리학회논문지D
• /
• 제13D권5호
• /
• pp.691-698
• /
• 2006

기업은 지속적인 경쟁 우위를 확보하기 위해 전략을 수립하고 추진하는 과정에서 변화가 심한 시장의 소리를 정확히 수집할 수 있는 역량과 이를 위한 비즈니스 프로세스의 구축 및 관리를 해야 한다. 비즈니스 프로세스의 수립, 운영, 개선, 평가 등 프로세스와 관련된 전 과정에서 업무 규칙과 프로세스를 정의하고 측정하여 기업의 문화에 맞게 프로세스를 정확하고 효율적으로 수행할 수 있어야 한다. 본 논문에서는 기업에서 수행하는 업무에 대해 규칙과 프로세스를 룰로 정의하여 프로세스의 정확한 수행을 가능하게 하고자 한다. 또한, 프로세스 수행의 주체인 개개인의 역량에 대한 정확한 데이터의 수집과 반영을 통해 프로세스 수행 결과에 대한 결함을 미리 예방할 수 있고 프로세스 개선점을 식별할 수 있는 기반 환경을 제안하였다. 이로써 룰로 표현한 업무 지식과 프로세스를 활용하여 높은 가시성을 확보할 수 있으며 철저한 측정 데이터 기반의 프로세스 개선을 통해 프로세스 중심의 업무 문화(혹은 시스템)를 조직에 정착시키는데 일조할 수 있다.

• Communications for Statistical Applications and Methods
• /
• 제17권3호
• /
• pp.459-471
• /
• 2010

일반적으로 고객들은 어떤 상품에 대한 품질수준이 높을수록 보다 높은 만족을 얻는 것으로 알려져 있다. 보통품질수준은 공정능력지수에 의해 측정된다. 공정능력이란 공정이 관리상태에 있을 때, 그 공정에서 생산, 제공되는 상품의 변동이 어느 정도인가를 나타내는 중요한 개념이다. 3세대 공정능력지수 $C_{pmk}$는 흔히 현장에서 사용되고 있는 지수$C_p$나$C_{pk}$보다 공정능력을 평가함에 보다 설명력이 있고 합리적인지수라고 할 수 있다. 공정능력에 대한 효율성 평가는 대부분 점추정과 구간추정을 통하여 행하여지고 있는 바, 가설검정을 통한 의사결정 또한 중요한 문제라고 할 수 있다. 본 논문에서는 공정능력여부를 결정하기위하여 공정능력지수 $C_{pmk}$에 대한 보다 유용한 가설검정방법에 대하여 연구하였다. 제안된 붓스트랩 가설검정방법은 공정분포가 정규분포에 따르던 그렇지 않던지 간에 매우 유용하며 보다 수월하게 활용할 수 있음을 밝혔다. 그리고 수치적인 모의실험을 통해 공정의 정규성 여부와 상관없이 제안된 가설검정방법의 타당성을 밝히고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2889-2894
• /
• 2013

A new complex [$Ni(phen)(C_9H_8Br_2NO_3)_2{\cdot}2CH_3OH{\cdot}2H_2O$] [phen: 1,10-phenanthroline $C_9H_8Br_2NO_3$: 3,5-dibromo-L-tyrosine] was synthesized and characterized by IR, elemental analysis and single crystal X-ray diffraction. X-ray crystallography shows that Ni(II) ion is six-coordinated. The Ni(II) ion coordinates with four nitrogen atoms and two oxygen atoms from three ligands, forming a mononuclear Ni(II) complex. The crystal crystallizes in the Orthorhombic system, space group $P2_12_12$ with a = 12.9546 ${\AA}$, b = 14.9822 ${\AA}$, c = 9.9705 ${\AA}$, V = 1935.2 ${\AA}$, Z = 1, F(000) = 1008, S = 0.969, ${\rho}_{calcd}=1.742g{\cdot}cm^{-3}$, ${\mu}=4.688mm^{-1}$, $R_1$ = 0.0529 and $wR_2$ = 0.0738 for 3424 observed reflections (I > $2{\sigma}(I)$). Theoretical study of the title complex was carried out by density functional theory (DFT) method and the B3LYP method employing the $6-3l+G^*$ basis set. The energy gap between HOMO and LUMO indicates that this complex is prone to interact with DNA. CCDC: 908041.

• 대한수의학회지
• /
• 제38권4호
• /
• pp.898-908
• /
• 1998

The aim of this experiments were to assess the time-interval change of motional characteristics in frozen-thawed semen of Korean native cattle (KNC) by using computer aided semen analysis (CASA) technology. Twenty-six KNC frozen semen straws were obtained from Korean KNC improvement department, livestock improvement main division, national livestock cooperatives federation in Korea. Specimens were allowed to thaw at $37^{\circ}C$ for 30 sec in water bath. Semen analysis was performed on semen image analysis system (SIAS, Medical supply, Korea) adjusted to the gate settings and used the semen droplet ($5{\mu}l$) placed on Makler counting chamber (Sefi medical instrument, Israel) prewarmed at $37^{\circ}C$. The same person used the same micropipette to fill the Makler counting chamber. A total of 150 or more of sperms were analysed in each specimen by a single trained person by scanning at least 5 to 10 fields. The measurement parameters in SIAS were as follows ; frame rate = 30 frames per sec, image capture = 1 sec, minimum motile speed = $10{\mu}m/s$, maximum countable sperm number = 400. Statistical analysis was done by Student t-test with use of the Sigma plot program on a IBM personal computer. The dancemean(DNM) and hyperactivated sperm(HYP) of frozen-thawed KNC semen kinematics were significantly decreased(p < 0.05) after 10 min of incubation at $37^{\circ}C$ water bath. But, wobble(WOB) of same sample semen was significantly increased(p < 0.05) after 10 min of incubation and significantly decrease(p < 0.05) after 60 min of same incubation. And, after 30 mim of incubation, significantly differences were found most of motion kinematics, motifity(MOT), curvilinear velocity(VCL), straight line velocity(VSL), average path velocity(VAP), amplitude of lateral head displacement(ALH), beat cross frequency(BCF), mean angular displacement(MAD), dance(DNC), on same sample semen. The DNM of KNC semen sample was variable kinematics after 30 min of incubation. Also, the linearity(LIN) and straightness(STR) was significantly decreased(p < 0.05) from 60 min of incubation. In conclusion, the AI within 30 min after thawing of frozen semen can be an effective method for obtaining high fertility rate in KNC reproductive program.