• Asian Journal of Turfgrass Science
• /
• v.20 no.1
• /
• pp.41-46
• /
• 2006

This study was carried out to evaluate the recycled waste soils from construction site for using vegetation media. The concentrations of Cd, Pb, $Cr^{6+}$, As, Hg, Cu, Cn, organic P, TCE, and PCE were measured at recycled soil piles of an industrial waste treating company in the Metropolitan landfill area. The concentrations of polluted materials did not exceed to the standard critical levels of soil pollution in all analyzed items. The results suggested a high potential of recycling of the wastes soils for vegetation soil media. However, Cd and $Cr^{6+}$ almost reached the critical levels by the time of sampling, and it is necessary to develop a skill to lower concentrations of those pollutants. In the turfgrass test, the recycled soil did show an encouraging result as vegetation media in the early growth stage of perennial ryegrass.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.10 no.5
• /
• pp.31-39
• /
• 2007

This study was carried out to evaluation the recycled waste soils from construction site for planting soil. For this purpose, the concentrations of polluted materials and the physico-chemical properties were measured at recycled soil samples of an industrial waste treating company in the Metropolitan landfill area. The concentrations of polluted materials did not exceed to the standard critical levels of soil pollution in all analyzed items. The measures of the samples soil texture (loamy sand), bulk density (1.09~1.32g/$cm^3$), saturated hydraulic conductivity ($1.6{\times}10^{-3}{\sim}1.8{\times}10^{-3}$cm/sec), solid phase distribution (0.4~0.5$m^3/m^3$), porosity (0.5~0.6$m^3/m^3$), Ex. $K^+$ (1.0~1.2cmol/kg), Ex. $Mg^{2+}$ (0.2~0.6cmol/kg) were identified as not worse than those of conventional planting soil. But the sample soils have serious problems for planting soil such as high levels of pH (9.6~11.5), EC (0.78~1.84ds/m) and Ex. $Ca^{2+}$ (25.6~34.5cmol/kg), low level of organic matter (0.2~0.3%). It is required to improve pH, EC and Ex. $Ca^{2+}$ of sample soils. Consequently, the results suggested a high potential of recycling of the wastes soils for planting soil.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.1
• /
• pp.29-39
• /
• 2003

The major objectives of this study were to investigate the physical characteristics of selected refuse landfill waste soils which are excepted general waste materials and assessed the possibility of recycling for road construction or embankment materials. The old landfill site which is selected for this study is located at Youngyang in Kyungsangpukdo and it had been dumped and closed for 16-25 years. Therefore, the selected landfill waste soil became to geotechnical engineering characteristics when the closed landfill site is reused for road embankment materials. It was found that it would be better to use the selected waste soil mixed with the ordinary soil.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.14-21
• /
• 2011

A unit modular system is a construction method which installs on site by manufacturing 50%~90% of the whole process in the factory. This method can minimize the process in the site and maximize the operation, which will reduce the duration and improve the overall quality. The recent paradigm of construction is to be sustainable building. Modular system can be regarded as a sustainable building construction method because it can reduce the amount of construction waste by recycling partial or whole part of overdue building be torn down. A unit modular system is the answer to cope with the increasing market of small size housings. A unit modular system is the most appropriate option at this point. This research proposes the standard operation and construction process of modular system, which enable to optimal system. A case study of reconstructing small-size housing was introduced to support this proposal. Finished unit modular is the reasonable way. However, 80% of complication rate of the modular is the most rational when a defect occurrence during delivery is considered.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.4
• /
• pp.77-82
• /
• 2014

In Korea, length of irrigation and drain canal is about 98,638 km. In the case of 2011, dredging on the irrigation and drain canal was 7,288 km about 3,290,483 $m^3$, cost of dredging was about 5.6 billion won and cost of dredging increases every year. (Korea Rural Community Corporation, 2013). In the case of land reclamation, the problem of cross-contamination due to leachate after landfill is expected, causing saturation of the landfill site, or complaints of landfill local residents, a number of problems. The ocean landfill is possible if the items of 14 types as defined in the Sea Pollution Prevention Law contained in sediment soil, such as chromium. In terms of cost and labor, it is need to develop a technology utilizing a processing method reasonable sediments for irrigation and drainage canal. The objective of this study was to analyze the characteristics of the sediment deposited on the irrigation and drain canal. it is to provide basic data for the scheme that can be efficiently recycled sediment deposited on the irrigation and drain canal.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.85-88
• /
• 2005

The stone powder sludge occurred at aggregate production process is classified the specified waste, so it is disposed by appropriate method. But the problems of the shortage of the disposal-site, the environment pollution, and the increase of disposal cost can be occurred in handling process, therefore the stone powder sludge is required the development of recycling technique. The stone powder sludge includes SiO2 of about $63\%$. This characteristic is important at the production of hardened specimens under condition of hydro-thermal reaction. In this study, we investigated the strength properties of concrete used stone powder sludge as siliceous material. The test results under condition of hydro-thermal reaction shows the two main facts. The first, the stone powder sludge is affected to fluidity because the surface of the stone powder sludge has characteristics of flakily and angularity. The second, weight content of the stone powder sludge, is not effective factor to the properties of strength.

• Journal of Environmental Science International
• /
• v.9 no.5
• /
• pp.437-441
• /
• 2000

A study on the removal of Pb ion from Pb-contaminated soil was carried out using ex-site extraction process. Tartaric acid (TA) and iminodiacetic acid sodium salt(IDA) as a washing agent were evaluated as a function of concentration reaction time mixing ratio of washing agent and recycling of washing agent. TA showed a better extraction performance than IDA. The optimum washing condition of TA and IDA were in the ratio of 1:15 and 1:20 between soil and acid solution during 1 hr reaction. The total concentrations of Pb ion by TA and IDA at three repeated extraction were 368.8 ppm and 267.5 ppm respectively. The recovery of Pb ion from washing solution was achieved by adding calcium hydroxide and sodium sulfide form the precipitation of lead hydroxide and lead sulfide and optimum amounts of sodium sulfide and calcium hydroxide were 7 g/$\ell$ for the TA washing solution and 4 g/$\ell$, 5g/$\ell$ for the IDA washing solution respectively. The efficiency of recycle for TA and IDA washing solution were 78.8% , 95.1%, and 89.2%, 96.6% at third extractions under $Na_2S$ and $Ca(OH)_2$, respectively.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.21-30
• /
• 2015

PURPOSES : The purpose of this study was to evaluate the performance of rapid-setting polymer-modified asphalt mixtures with a high reclaimed asphalt pavement (RAP) content. METHODS: A literature review revealed that emulsified asphalt is actively used for cold-recycled pavement. First, two types of rapid-setting polymer-modified asphalt emulsion were prepared for application to high-RAP material with no virgin material content. The quick-setting polymer-modified asphalt mixtures using two types of rapid-setting polymer-modified asphalt emulsion were subjected to the following tests: 1) Marshall stability test, 2) water immersion stability test and 3) indirect tensile strength ratio test. RESULTS AND CONCLUSIONS : Additional re-calibration of the RAP was needed for laboratory verification because the results of analyzing RAP aggregates, which were collected from different job sites, did not deviate from the normal range. The Marshall stability of each type of binder under dry conditions was good. However, the Type B mixtures with bio-additives performed better in the water immersion stability test. Moreover, the overall results of the indirect tensile strength test of RAP mixtures with Type B emulsions exceeded 0.7. Further research, consisting of lab testing and on-site application, will be performed to verify the possibility of using RAP for minimizing the closing of roadways.

• Fashion & Textile Research Journal
• /
• v.9 no.4
• /
• pp.363-372
• /
• 2007

T-shirt has changed into advanced and stylish outwear by new paradigm, taste of consumer, awareness of recycling, spread of subculture, DIY culture, refusal of standardization and pursuit of high quality goods, etc. The purpose of this study was to analyze aesthetic characteristics of t-shirt designs that changed into diverse designs in world fashion college since 2000. The method of this study was to analyze documentaries, fashion magazines and internet fashion site. Aesthetic characteristics of t-shirt designs were expressed in deconstruction, mixture, integration and imitation. And each of external expressions and internal meanings was as follows: First, deconstruction was expressed in partial cutwork and three dimensional texture by sewing and construction drape. It means breaking the conventional structure and break-ing the boundary of t-shirt and another item and possibility of multi-vocal analysis. Second, mixture was expressed in collage of diverse ornaments, diverse fabrics and diverse patterns. It means exceeding the limit of material, elaboratenes and high quality of handwork, reflection of self-identity, brand image, fashion trend, consumer's psychology and mind of experimentation and couture. Third, integration was expressed in extension of length, width, use and style. It means unification of functions, deconstruction of items and extension of meanings and images. Forth, imitation was expressed in stain of dye, irregular and ripped sign, cut out, rough warp, drawing and washing, etc. It means subculture, rarity value, monopolization, diversity, familiarity, yearning and uniqueness.

• Parasites, Hosts and Diseases
• /
• v.49 no.2
• /
• pp.103-108
• /
• 2011

Autophagy is a catabolic process involved in the degradation of a cell's own components for cell growth, development, homeostasis, and the recycling of cellular products. Autophagosome is an essential component in the protozoan parasite during differentiation and encystation. The present study identified and characterized autophagy-related protein (Atg) 3, a member of Atg8 conjugation system, in Acanthamoeba castellanii (AcAtg3). AcAtg3 encoding a 304 amino acid protein showed high similarity with the catalytic cysteine site of other E2 like enzymes of ubiquitin system. Predicted 3D structure of AcAtg3 revealed a hammer-like shape, which is the characteristic structure of E2-like enzymes. The expression level of AcAtg3 did not increase during encystation. However, the formation of mature cysts was significantly reduced in Atg3-siRNA transfected cells in which the production of Atg8-phosphatidylethanolamine conjugate was inhibited. Fluorescent microscopic analysis revealed that dispersed AcAtg3-EGFP fusion protein gathered around autophagosomal membranes during encystation. These results provide important information for understanding autophagic machinery through the lipidation reaction mediated by Atg3 in Acanthamoeba.