• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.2
• /
• pp.21-28
• /
• 2022

Focusing on the creation of a new han ok, especially a mid-rise hybrid-structured Han-ok, this study proposes a middle-rise (four-story) Han-ok on one and two lots located in Seoun-dong, the existing Han-ok intensive housing site in downtown Cheongju. 1) In terms of layout and function, according to the existing L-shaped Han-ok corresponding to the road and the direction, the parking lots and shops on the 1st floor, the business facility on the 2nd floor, the Han-ok on the 3rd and 4th floors are placed. There are yards, open roof yards, and semi-open Daecheong(大廳, main hall), which can be shared by residents. 2) In terms of structure and form, one or two floors (some 3 floors) are 5.4m square and 5.4×6.6m modules of the RC(Reinforced Concrete) group, and the upper floor reflects the 2.7m module, size and shape of the existing Han-ok. By extending the outer wall of the RC group in the lower floors (1st to 3rd floors) to the wooden exterior of the upper floors (2nd to 4th floors), it is attempted to avoid the awkward appearance of the RC group being exposed to wooden structures. And it is also attempted to reflect the wooden shape and design elements through the elevation elements such as horizontal windows, corner windows, picture frames, and vertical slits. 3) In environmental control and facilities, it is attempted to smooth the ventilation of the building by forming a vertical upward airflow from the dark space of the low floor to the positive of the upper floor. This doubles the effect through a vertical rise of cold air generated in a narrow alleyway, piloti parking lot, and the various voids. In addition to the Daecheong and Numaru(loft) of Han ok, the rooftop yard, the terrace, and the balcony, horizontal natural ventilation is generated through divided doors and transom windows.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.291-297
• /
• 2023

Objectives: An epidemiological investigation was requested for a worker who developed COPD and IPF after long-term molding and firing at a domestic tile manufacturing site. We would like to share the results of the exposure assessment and the estimation of past work. Methods: The content of crystalline silica in four raw materials was analyzed, and the respirable fraction of crystalline silica and dust generated in the air from molding and firing workers and other processes were measured. The measurement and analysis method referred to the NIOSH method. Results: The crystalline silica content of the raw material was 24~47%. The concentration of crystalline silica in the molding and firing process workers and the surrounding area was at the level of the exposure standards set by the Ministry of Employment and Labor and ACGIH, and the respirable and total dust exposure levels were generally low. The crystalline silica concentration of the area samples measured to estimate past work was about twice as high as the exposure standard of the Ministry of Employment and Labor (0.05 mg/m3), and the exposure levels of respirable dust were also quite high at 0.903 and 1.332 mg/m3. Conclusions: It was confirmed that tile molding and firing workers are currently exposed to a fairly high level of crystalline silica, and a high level is also confirmed in area samples to estimate past work. In the past, it is judged that the level of exposure would have been much higher due to differences in production volume, working method, presence/absence of local ventilation facilities, and process layout. When working in such a working environment for a long time, respiratory diseases such as lung cancer, COPD, and IPF can occur.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.2
• /
• pp.61-69
• /
• 2024

Wave conditions are crucial for offshore wind farm design, particularly in determining structural loads and layout. However, there is limited wave hindcasting research for the Wangdeungdo Island area, a potential offshore wind site. This study used the MIKE21 model for a year-long wave hindcast around Wangdeungdo in 2021. Validation showed high reproducibility for significant wave heights with RMSE values of 0.177 and 0.225 and Pearson correlations of 0.971 and 0.970 at Sangwangdeungdo and Buan buoys. Subsequent analysis of the wave characteristics near Wangdeungdo indicated significant seasonal variations and differences in maximum significant wave heights across locations, which are expected to significantly impact the design loads for offshore wind structures.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.179-189
• /
• 2014

The Saemaeul Movement, which is the representative national campaign of Korea aimed at the development of local communities, has drawn a great deal of attention from home and abroad and formed an element of Korea's national brand since 2000. Accordingly, this research was conducted for the purpose of constructing a memorial park in Shindo Village, Cheongdo County, North Kyoungsang Province, which is a home to the Saemaeul Movement. As the Saemaeul Movement is benchmarked by many countries around the world today, this research aims to communicate the spirit and social value of the movement and disseminate its effects of local community development in rural areas through the construction of a memorial park. In this study, the design motive of the memorial park was conceived through the historical review and case studies of the Saemaeul Movement. In parallel, theoretical study was also conducted on design techniques as the basis of this research. In consideration of the characteristics of a technical article, this research was conducted in several phases. In the first phase, the conditions of the site where the park construction was planned were analyzed and the direction of its development was set. In the second phase, the main theme and the basic principles of planning were established, and the contents of the park construction project were devised in detail. In the last phase, a comprehensive plan was established, including a space layout to accommodate activities, facilities and programs to be introduced to the park. The park construction site ($106,000m^2$) was divided into four zones (memorial zone, historical theme park, education zone and experience zone) based on circulation planning aimed at creating memorial space, and was linked to eco-friendly ecological space in consideration of environmental features. At a time when the Saemaeul Movement is being propagated across the world, the result of this study will help create a place for its memorial and play a pivotal role to boost international movements aimed at promoting co-prosperity across the global village. It will also bear significance as an example of theme-based park construction in a rural area and the invigoration of a local community.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.480-507
• /
• 2019

This paper aims at optimizing the auxiliary ventilation system in large-opening limestone mines with unducted fans. An extensive CFD and also site study were carried out for optimization at the blind entries. The fan location, operating mode, and layout are the parameters for optimization. Since the jet stream discharged from the auxiliary fan is flowing faster than 15 m/s in most of the cases, the stream collides with floor, sides or roof and even with the jet stream generated from the other fan placed upstream. Then, it is likely to lose a large portion of its inertial force and then its ventilation efficiency drops considerably. Therefore, the optimal fan installation interval is defined in this study as an interval that maximizes the uninterrupted flowing distance of the jet stream, while the cross-sectional installation location can be optimized to minimize the energy loss due to possible collision with the entry sides. Consequently, the optimization of the fan location will improve ventilation efficiency and subsequently the energy cost. A number of different three-dimensional computational domains representing a full-scale underground space were developed for the CFD study. The velocity profiles and the CO concentrations were studied to design and optimize the auxiliary ventilation system without duct and at the same time mine site experiments were carried out for comparison purposes. The ultimate goal is to optimize the auxiliary ventilation system without tubing to provide a reliable, low-cost and efficient solution to maintain the clean and safe work environment in local large-opening underground limestone mines.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.39-50
• /
• 2015

This research selected Daegu Metropolitan City representing a combination of natural space and urban space for this case study. To achieve this, a prerequisite was to set up an optimal block size to evaluate landscape diversity of the research site by using a RPR-Area Curve. Further, landscape diversity evaluation was conducted based on land cover map by using FRAGSTATS to analyze spatio-temporal changes. Notably, this research regarded it as the most significant to set forth criteria in order to apply landscape diversity to the development plans of the newtown and outskirt of a city under high pressure development. Results derived from this research are summarized as follows. According to the results derived from establishing the optimal block size, a size about $2km^2$ was analyzed to measure landscape diversity of the research site. Also, according to the results derived from land diversity evaluation based on land cover map, land diversity was highly measured around urban stream such as Nakdong River and Geumho River, and in particular, the value of landscape diversity was measured considerably high around the urban parks. Results derived from analysis on spatio-temporal changes of land diversity demonstrated that a certain level of urban development exerted a positive effect on an increase in land diversity, but consistent urban development lowered a value of landscape diversity. Results derived from regression analysis to set forth the optimal urban space showed that an urban area of a space about $2km^2$ exerted a positive effect at a rate of about 0~43.3% and a negative effect at a rate about 43.3~100%. In conclusion, the results of this research are considered to provide important basic data for future urban and landscape planning. Nonetheless, as only the layout on the 2D plane was analyzed in this research, further research in future is required to complexly consider diverse factors such as height of structure and change in visible real area arising from geographical features.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.117-136
• /
• 1999

The geophysical survey at pre-investigation stage can hardly provide the detailed information on geological structure of site which has difficulty in access and thick overburden. The TSP (VSP applied in tunnel) survey at post-investigation stage can show the detailed geology ahead of tunnel and around cavern. The TSP survey was carried out at the Pyongtaek LPG storage cavern site during the cavern excavation and provided the location and orientation of the fault inferred below Namyangho. In order to confirm the result of TSP survey four boreholes were drilled in access tunnel. The fault was also detected by borehole survey and the location was coincided with the result of TSP survey. Depend on the result of TSP survey and core logging, the design such as cavern layout and length could have been changed. As another case history the TSP survey was performed at the Mumeuje road tunnel which has poor geological information due to thick overburden. The support design was also changed on the base of TSP survey.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.637-658
• /
• 2022

TBM tunnel is simple with the iterative process of excavating the ground, building a segment ring-build, and backfilling. Drill & Blast, a conventional tunnel construction method, is more complicated than the TBM tunnel and has some restrictions because it repeats the inspection, drilling, charging, blasting, ventilation, muck treatment, and installation of support materials. However, the preparation work for excavation requires time and cost based on a very detailed plan compared to Drill & Blasting, which reinforces the ground and forms a tunnel after the formation of tunnel portal. This is because the TBM equipment for excavating the target ground determines the success or failure of the construction. If the TBM, an expensive order-made equipment, is incorrectly configured at the assembly stage, it becomes difficult to excavate from the initial stage as well as the main excavation stage. When the assembled shield TBM equipment is dismantled again, and a situation of re-assembly occurs, it is difficult throughout the construction period due to economic loss as well as time. Therefore, in this study, the layout and plan of the site and the assembly process for each major part of the TBM equipment were reviewed for the assembly of slurry shield TBM to construct the largest diameter road tunnel in domestic passing through the Han River and minimized interference with other processes and the efficiency of cutter head assembly and transport were analyzed and improved to suit the site conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.208-216
• /
• 2019

Rural houses are losing their original shape as they mimic the spatial composition of urban houses. Therefore, the purpose of this study was to extract the design elements needed for rural housing by applying Christopher Alexander's "A PATTERN LANGUAGE" to Standard Rural-House Design (SRHD). The scope and method of research was to compare and analyze the standard designs (SD) produced and distributed by the 'Korea Rural Community Corporation' from 2009 to 2014. The research result is summarized as follows. 1) The housing layout in the SD ignored the site conditions of various rural areas. 2) Most of the houses were not actively planned, considering that they contain various activities of rural life. 3) There was no room for children and the kitchen was planned to integrate the interior into a flexible space in the form of L.D.K. 4) There was no space plan that could be used as both a leasable annex and office space for the farming community. 5) Many small area plans were made because of the SD plan for couples only in 2014. Although the rural environment and living patterns were ignored in the SD, the diverse pattern language provided by the pattern language was developed as a SD element for rural houses, which is the most suitable housing plan for the farmers' livelihood pattern.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.477-482
• /
• 2022

The structure of the turnout track is very complex, so it is a facility that is more difficult to maintain and requires detailed management than a general track type. The purpose of this study is to analyze the effect on the deformation of the turnout system of the ground section due to the excavation work adjacent to the serviced urban railways. In this study, based on finite element analysis for each stage of adjacent excavation, the track deformation for each major location of turnout system was analyzed in consideration of the layout of the turnout system installed on the ground section, and the safety and stability was confirmed by comparing it with the track irregularity regulation. As a result of the study, it was found that the major construction stage affecting the track deformation of the turnout system on the ground section was the final stage of excavation. In addition, although the vertical displacement which is a vertical irregularity occurred relatively large, it was analyzed that the horizontal deformation was dominant overall, because of the excavation site is located on the side of the turnout system. In addition, it was analyzed that the amount of displacement at each major location of the turnout system is different, and there is a possibility that there may be a twist irregularity due to the deviation of the track deformation for each location according to the distance from the excavation site. Therefore, it was analyzed that it is necessary to classify and manage the importance of the track deformation of the turnout system of actual operating line, including additional displacement due to adjacent excavation, based on the track irregularity that has occurred at each location where the major deformation characteristics occur.