• Tunnel and Underground Space
• /
• v.18 no.2
• /
• pp.134-148
• /
• 2008

The state of in situ stress is an important factor in considering the suitability of a site as a geological repository for nuclear waste. In this study, three-dimensional distinct numerical analysis was conducted to investigate the effect of deformation zones on the state of stress in the Oskarshamn area, which is one of two candidate sites in Sweden. A discontinuum numerical model was constructed by explicitly representing the numerous deformation zones identified from site investigation and far-field tectonic stress was applied in the constructed model. The numerical model successfully captured the variation of measured stress often observed in the rock mass containing large-scale fractures, which shows that numerical analysis can be an effective tool in improving the understanding of the state of stresses. Discrepancies between measured and modelled stress are attributed to the inconsistent quality of measured stress, uncertainty in geological geometry. and input data for fractures.

• Smart Media Journal
• /
• v.4 no.4
• /
• pp.86-92
• /
• 2015

Recently, it is entering the hyper connectivity age due to the development of sensor and communication technology. In particular, it is emerging new industries such as the IoT, bigdata, cloud by convergence with the ICT and other industries. Because these industries are high the gravity of the software, the demand for software manpower is increasing rapidly. But university curriculum don't deviate from the traditional curriculum, and lack of positive response to these changes is occurring a mismatch with the industry demand. In this paper, investigate a software curriculums of the four-year university, and will attempt to investigate the perception about the university software course of the corporate perspective. Also, we draw a on-site fitness of universities training course by analysis of importance on software training courses between universities and businesses. Finally, we propose a strategy model for software training course design appropriate for the field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.556-563
• /
• 2020

Most of a BIPVS (Building Integrated Photovoltaic System) is installed on the rooftop or wall of a building. Therefore, the main factor to consider for selecting the installation site is the shadow effects produced by the surrounding buildings. On the other hand, when the photovoltaic was installed on soundproof walls, shadow effects were produced by not only surrounding buildings but also the surrounding trees. Therefore, a different data model and algorithm with the BIPVS case are essential for proper installation sites selection of a SIPVS (Soundproof wall Integrated Photovoltaic System). This paper deals with the DSM (Digital Surface Model)-based proper installation site analysis for SIPVS. First, the solar incident and altitude angles of the installation candidate sites (solar panel) during the year were calculated. Second, the shadow effects (shadowed or unshadowed) were determined for the candidate sites at each time with the DSM. Third, the amount of solar radiation was calculated with the incident angle for the candidate sites at an unshadowed period. The proper installation site of the SIPVS could then be selected by comparing the accumulated annual solar radiation for each candidate. The proposed algorithm was implemented as a prototype (Java program). From the experiment, the order of the installation suitability was determined among the nine candidates. The proposed algorithm could be used for proper BIPVS installation site analysis aimed at the lower part of a building and calculation of the expected power production.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.275-279
• /
• 2005

수자원 개발에 있어 중요한 문제 중의 하나는 개발가능지의 선택과 후보지가 복수일 때 개발 우선순위를 결정하는 것이라 할 수 있다. 이러한 문제 해결을 위하여 적지분석을 실시한다. 적지분석 과정은 크게 기초 조사 및 자료수집, 예비후보지의 선정, 대안평가, 입지선정의 :t단계로 구분되는데 여기서 2-3단계인 예비후보지 선정과 대안평가 단계가 적지분석 기법이 적용되어야 할 과정이다. 기존의 의사결정 방법론들은 각 대안의 우선순위를 위해 각 항목들에 대한 가중치나 확률치를 이용한 수치적 계산에 의한 방법들이 대부분이며, 또한, 각 후보지에 대해서 동일한 항목에 대한 정보를 요구하게 되어 한 후보지이라도 정보가 없는 경우 우선순위를 위한 계산과정에서 제외하거나 결정자의 경험 등에 의한 추정 값을 사용할 수밖에 없다. 이러한 이유로 본 연구에서는 입지선정에서 대상 후보지의 인자비교를 위한 항목의 자료 유무에 관계없이 적지분석이 가능하도록 게임이론을 적용하여 수자원 개발 가능 후보지를 도출하기 위한 기본모형을 개발하였다.

• International Journal of High-Rise Buildings
• /
• v.5 no.2
• /
• pp.71-86
• /
• 2016

This paper summarizes the results of a two-year-long research project conducted by the CTBUH on the life cycle assessment (LCA) of tall building structural systems. The research project was made possible thanks to a $300,000 contribution from ArcelorMittal and the support of some of the most important structural engineering firms and players in the tall building industry. The research analyzed all life phases of a tall building's structural system: the extraction and production of its materials, transportation to the site, construction operations, final demolition of the building, and the end-of-life of the materials. The impact of the building structure during the operational phase (i.e., impact on daily energy consumption, maintenance, and suitability to changes) was also investigated, but no significant impacts were identified during this phase.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.1 no.2
• /
• pp.14-25
• /
• 1998

The purpose of this paper is to select proposed waste facilities sites after consideration of relative importance of siting factors. From the literature review we have established the siting factors affecting selecting waste facilities sites, and constructed hierarchy of siting factors to evaluate the relative importance of the factors using Analytical Hierarchy Process(AHP). After mail surveying of expert group, we have analyzed the relative importance of siting factors affecting waste facilities. We have constructed Geographic Information System(GIS) of raster type, based on seventeen theme maps of siting factors on waste facilities, to select the proposed waste facilities sites after consideration of the relative importance of the siting factors for Gyongsan city, in Korea. After applying linear combination method, and factor combination method to overcome the methodological limitations of land suitability analysis, we have found five proposed sites, where intersected with proposed sites obtained from the two methods. From this research we have found that 1) methodologically, using GIS for selection of proposed waste facilities sites turned out to be highly useful, 2) application of relative importance of siting factors and two methods of land suitability analysis in selection of proposed waste facilities sites are pertinent enough to provide valid and reliable results, and 3) the research methods and approach employed in this research will be highly useful in site selection of other major facilities.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.799-810
• /
• 2022

Welding work is a production work method widely used throughout the industry, and various types of welding technologies exist. In addition, many methods are being studied to automate these welding operations using robots, but in the ship manufacturing field, welding such as painting, cutting, and grinding is also the most common operation, but the manual operation ratio is higher than in other industries. Such a high manual labor ratio in the field of ship manufacturing not only causes quality problems and production delays according to the skill of workers, but also causes problems in the supply and demand of manpower. Therefore, this paper analyzed the reason why the automation rate is low in welding work at ship manufacturing sites compared to other industries, and analyzed the production process and field environment for small and medium-sized ship manufacturing companies that repeatedly manufactured with a small quantity production method. Based on the analysis results, it is intended to propose a robot system that can easily move between workplaces and secure uniform welding quality and productivity by collaborating simple welding tasks with humans. Finally, the simulation environment is constructed and analyzed to secure the suitability of robot system application to current production site environment, work process, and productivity, rather than to develop and apply the proposed robot system. Through such pre-simulation and robot system suitability analysis, it is expected to reduce trial and error that may occur in actual field installation and operation, and to improve the possibility of robot application and positive perception of robot system at ship manufacturing sites.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.7
• /
• pp.73-85
• /
• 2008

320 national groundwater monitoring stations have been constructed since 1995 and groundwater levels are measured automatically 4 times a day at each well. It has a difficulty to estimate an average recharge rate of watershed using the recharge rate of the monitoring site because of the lack of its representative on converting a point recharge rate into a spatial one. In this study, the relations between site characteristics (topography, hydraulics, geology, facilities, etc.) and recharge rates of 223 monitoring sites, which were selected using cluster analysis, were analyzed using statistical methods, and finally, regression models were constructed for a recharge rate estimation of non-measured areas. The independent variables for these simple regression models, 1) width of adjacent stream, 2) distance to the nearest stream, 3) topographic slope, and 4) rock type, are proposed using analysis of variance. These models have lots of advantages such as an easy data collection from topographic and geologic maps, a few input variables, and also simplicity in use. Suitability analysis from the comparison between estimation values and original ones at monitoring sites shows that these models are useful for a groundwater recharge estimation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1011-1018
• /
• 2014

Because of the proliferation of web services through web site, web hacking attempts are increasing using vulnerabilities of the web application. In order to improve the security of web applications, we have to find vulnerabilities in web applications and then have to remove. This paper addresses a vulnerability in a web application on existing problems and analyze and propose solutions to the vulnerability. This paper have checked the stability of existing web security solutions and evaluated its suitability through analysis of vulnerability. Also, we have implemented the vulnerability analysis tools for web Proxy system and proposed methods to optimize for resolution of web vulnerabilities.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1145-1156
• /
• 2022

In order to effectively secure site suitability for the development of large-scale offshore wind farms, it is essential to minimize the environmental impact of development and analyze the conflicts of benefit between social, ecological, and economic core values. In addition, a preliminary review of site adequacy must be preceded in order not to collide with other used areas in the marine spatial plan. In addition, it is necessary to conduct local meteorological characteristics analysis including wind resources near Jeollanam-do area before project feasibility study. Therefore, wind resource analysis was performed using the observation data of the meteorological mast installed in Wangdeungnyeo near Anmado, Yeonggwang, and the optimal site was selected after excluding geographical constraints related to the location of the offshore wind farm. In addition, the annual energy production was calculated by deriving the optimal wind farm arrangement results suitable for the local wind resources characteristics based on WindSim SW, and it is intended to be used as basic research data for site discovery and selection of suitable sites for future offshore wind farm projects.