• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.682-688
• /
• 2016

In $TiO_2$-CuO systems, low-temperature sinterability was investigated by a conventional sintering method. Sintering temperatures were set at under $950^{\circ}C$, at which the volume diffusion is inactive. The temperatures are less than the melting point of Ag ($961^{\circ}C$), which is often used as an internal conductor in low-temperature co-fired ceramic technology. To optimize the amount of CuO dopant, various dopant contents were added. The optimum level for enhanced densification was 2 wt% CuO. Excess dopants were segregated to the grain boundaries. The segregated dopants supplied a high diffusion path, by which grain boundary diffusion improved. At lower temperatures in the solid state region, grain boundary diffusion was the principal mass transport mechanism for densification. The enhanced grain boundary diffusion, therefore, improved densification. In this regard, the results of this study prove that the sintering mechanism was the same as that of activated sintering.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.295-301
• /
• 2000

The effect of V2O5 addition on the low temperature sintering of Pb(Mn1/3Sb2/3)O3-PZT ceramics, which is known as a prominent material for piezoelectric transformer application was studied, and the densification behavior and piezoelectric characteristics of the samples as a function of heating rate were also examined. V2O5 led the system to liquid phase sintering by forming liquid phase during sintering, which accelerated densification through the particle rearrangement in the early stage of sintering. The liquid phase mostly existed at grain boundaries retarded the evaporation of PbO, while the densification temperature and the weight loss of V2O5-free samples were higher than those of samples with V2O5. Faster heating improved the densification of the samples regardless of V2O5 addition. The low temperature sintering at 100$0^{\circ}C$ was achieved in PMS-PZT ceramics with high density and reasonable dielectric and piezoelectric characteristics. This result revealed optimistic way to the development of multi-layered piezoelectric transformers.

• 한국세라믹학회지
• /
• 제19권3호
• /
• pp.205-214
• /
• 1982

The method of lowering the sintering temperature and enlarging the range of sintering temperature in the manufacture of forsterite porcelain as a high frequency insulator was investigated. The four kinds of forsterite chamotte were calcinated at $1400^{\circ}C$. The forsterite bodies produced by adding $BaCO_3$ as a flux and 5% Kaolin as a bonding agent were heated in the range of sintering temperature. Sintering temperature tended to increase almost straightly as MgO exceded without $BaCO_3$. The range of sintering tem was at least $140^{\circ}C$. Specimens of MF-2-0, MF-2-A had superior mechanical strength and dielectric properties. The growing of the forsterite crystal was restricted and thus their grain size became fine and also the amount of crystal formation tended to decrease rapidly as $BaCO_3$ increased excessively.

• 한국세라믹학회지
• /
• 제33권2호
• /
• pp.183-191
• /
• 1996

For the fabrication of semiconducting BaTiO3 ceramics at lower sintering temperature BN was selected as a sintering aid and the microsturcture of semiconducting BaTiO3 ceramics and PTCR characteristics by their microstructural changes were investigated. by adding BN to 0.1 mol% Sb2O3-doped BaTiO3 ceramics the sintering temperature showing semiconducting BaTiO3 ceramics was reduced by 16$0^{\circ}C$ from 130$0^{\circ}C$ to 114$0^{\circ}C$ and the specific resistivity ratio was increased as the amount of BN was increased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.253-254
• /
• 2007

In this study, in order to develop low temperature sintering multilayer piezoelectric actuator, PMN-PNN-PZT system ceramics were fabricated using $Li_2CO_3-Bi_2O_3$-CuO as sintering aids and their piezoelectric and dielectric characteristics were investigated as a function of heating rate. At sintering temperature of $900^{\circ}C$, with increasing heating rate, electromechanical coupling factor(kp), mechanical quality factor(Qm) and dielectric constant $({\varepsilon}_r)$ were increased.

• 한국결정성장학회지
• /
• 제21권1호
• /
• pp.34-40
• /
• 2011

무기성 폐기물인 준설토를 원료로 인공골재를 제조함에 있어, 직화소성법을 이용하여 소성온도(1100 및 $1200^{\circ}C$)와 시간(10~60 min)을 변수로 하여 인공골재의 부피비중, 흡수율 그리고 미세구조를 제어하였다. 또한 직화소성과 기존에 발표된 승온소성의 방법 차이에 따른 인공골재의 물성을 비교 분석하였다. 직화소성 시, 소성온도가 $1100^{\circ}C$에서 $1200^{\circ}C$로 증가하면, 껍질의 두께가 증가함과 동시에 블랙 코어 부분의 기공크기가 증가하면서 골재의 부피비중이 1.0 이하를 나타내었다. 또한 같은 소성온도에서 소성시간이 증가할수록 블랙코어의 단면적이 감소하고, 껍질의 두께가 증가하면서 흡수율이 감소하였다. 부피비중 1.0 이하의 인공골재는 직화소성이나 승온소성으로 제조된 경우 모두 블랙 코어부분의 미세구조가 서로 비슷한 경향을 나타내었다. 반면, 껍질(shell)의 미세구조는 승온소성된 경우에 더 치밀한 구조를 나타냈으며, 따라서 직화소성된 골재의 흡수율이 상대적으로 높았다. 이로서 직화소성법은 세라믹 담체 또는 흡착제등에 적용될 인공골재 제조에 적합한 방법임을 알 수 있었다.

• 대한치과기공학회지
• /
• 제39권3호
• /
• pp.145-152
• /
• 2017

Purpose: This study sought to identify changes in the mechanical characteristics and color of zirconia according to different sintering temperatures of the substance. Methods: This study processed some specimens of zirconia into those of $8mm(H){\times}10mm(W){\times}50mm(L){\pm}0.1$ each, and sintered them at $1450{\sim}1600^{\circ}C$ on a $50^{\circ}C-interval$ basis in order to examine how their mechanical characteristics and color are changed. Each specimen sintered using the spectral colorimetric apparatus (Easyshade, VITA, Germany) was observed for each of the color change by sintering temperature. Results: When those specimens were sintered at $1450{\sim}1600^{\circ}C$, they were 0% in absorption ratio and porosity, 20% in shrinkage ratio and $6.10g/cm^3$ in specific gravity. Absorption ration, porosity, shrinkage ratio and specific gravity all didn't vary depending on the sintering temperature. The fracture strength of the specimens was highest or 1037MPa at the sintering temperature of $1550^{\circ}C$ and a little lower or 989MPa at that of $1600^{\circ}C$. No variation in L* value was found depending on the sintering temperature of the specimens, while c* value was highest at that of $1450^{\circ}C$. In addition, h* value was highest when the specimens was sintered at $1550^{\circ}C$. Conclusion: This study could determine how zirconia shows changes in mechanical characteristics and color in accordance with different temperatures of its sintering. It is necessary to supplement the physical data of colored transparent zirconia block which is expected to be widely used in clinical practice.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.431-434
• /
• 2001

The mechanical and phase transformation of the cold isostatically pressed $\alpha$-SiC ceramic were investigated as a function of the sintering temperature. The result of phase analysis by XRD revealed 6H, 4H, 3C and phase transformation between 6H and 4H showed a sudden change over 200$0^{\circ}C$. However, the alongrightarrow$\beta$ reverse transformation did not occur to any sintering temperature. The relative density and the mechanical properties of $\alpha$-SiC ceramic was increased with increased sintering temperature. The flexural strength rapidly inclosed below 210$0^{\circ}C$ and showed the highest value of 410 MPa at 220$0^{\circ}C$. This reason is because crack was propagated through surface flaw. The fracture toughness showed the highest value of 3.3 MPa.m$_{1}$2/ at 220$0^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제19권1호
• /
• pp.29-34
• /
• 2006

The effects of $B_2O_3$ addition on the low-temperature sintering behavior and microwave dielectric properties of $(Zn_{0.8}Mg_{0.2})TiO_3$ ceramic system were investigated. Highly dense samples were obtained at the sintering temperatures below $900^{\circ}C$. The $Q{\times}f_o$ values were determined by the microstructures and sintering shrinkages which are affected by the amount of $B_2O_3$ and sintering temperature. Temperature coefficient of resonance frequency($T_f$) changes to a positive value with increasing the amount of $B_2O_3$ due to the increased amount of rutile phase which is one of the reaction products between $(Zn_{0.8}Mg_{0.2})TiO_3$ and $B_2O_3$. For $6.19 moi.{\%}B_2O_3$-added $(Zn_{0.8}Mg_{0.2})TiO_3$ system, it exhibits ${\epsilon}_r$ = 23.5, $Q{\times}f_o$ = 53,000 GHz, and $T_f$ = 0 ppm/$^{\circ}C$ when sintered at $900^{\circ}C$ for 5 h.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1256-1257
• /
• 2008

Dye-Sensitized Solar Cell(DSSC) is a new type of solar cell by using photocatalytic properties of $TiO_2$. The size and shape of $TiO_2$ particle are two of important parameters that are related to the characteristics of DSSC. And these can be changed by controlling $TiO_2$ sintering conditions especially temperature. The particles of $TiO_2$ are classified anatase and rutile. Anatase particles are created at low sintering temperature and rutile particles are created at high sintering temperature. Anatase particles have advantages such as increased surfaces that cause more attached dye molecules, and fast electron transportation. And rutile particles have advatages such as more efficient light scattering. Therefore, we studied characteristics of DSSC in this paper as $TiO_2$ sintering temperature is varied. As a result, we found that characteristics of DSSC are very good in the case that anatase and rutile particles are together and this sintering temperature is 450$^{\circ}C$.