본 논문에서는 무선 센서 네트워크에서 지연시간에 민감한 데이터를 빠르게 전송하기 위하여 채널 상태를 고려하여 경로를 선택하는 라우팅 기법을 제안하였다. 실시간 전송을 위한 기존의 방식들은 단순히 전파 지연시간이 짧은 경로 혹은 홉 수가 적은 경로를 선택한다. 또한, 무선 매체의 특성에 따라 링크 에러율을 기반으로 하여 실시간 전송 경로를 선정하는 알고리즘도 제안되었다. 하지만, 링크 에러율이 영향을 미치는 전파 지연시간과 재전송 타임아웃 시간은 채널을 검사하고 백오프하는 시간 보다 짧다. 따라서, 본 논문에서 제안하는 기법은 채널 백오프 비율을 기반으로 하여 채널 사용과 패킷 송신에 소요되는 시간을 추정하였다. 소스 노드는 가장 짧은 지연시간을 가진 경로를 실시간 트래픽을 위한 전송 경로로 선택하였다. 링크 에러율과 채널 백오프 비율에 따른 실험을 통하여 제안 방식이 종단 간의 데이터 전달 속도를 향상시킨다는 사실을 확인하였다.
Dual Phase (DP) steel which has a soft ferrite phase and a hard martensite phase reveals both high strength and high ductility and has received increased attention for use in automotive applications. To conduct structural analysis to verify vehicle safety, highly credible experimental results are required. In this study, tensile tests were performed in a strain rate range from $10^{-4}/s$ to 300/s for Sink Roll-Less (SRL) hot-dip metal coated sheets. Collision properties were estimated through simulation by LS-DYNA using the stress-strain curve obtained from the tensile test. The simulation results were compared with the actual crash test results to confirm the credibility of the simulation. In addition, a tensile test and a crash test with 2% prestrain and a baking (PB) specimen were evaluated identically because automotive steel is used after forming and painting. The mechanical behaviors were improved with an increasing strain rate regardless of the PB treatment. Thus, plastic deformation with an appropriate strain rate is expected to result in better formability and crash characteristics than plastic deformation with a static strain rate. The ultimate tensile strength (UTS) and absorbed energy up to 10% strain were improved even though the total elongation decreased after PB treatment, The results of the experimental crash test and computer simulation were slightly different but generally, a similar propensity was seen.
참깨의 만기재배시 개화 및 등숙특성을 알고자 품종 $\ulcorner$수원 9호$\lrcorner$를 6월 19일과 7월 3일 2회에 걸쳐 1kg/10a의 파종량으로 휴입조파하였다. 개화기에 각 파종익별로 5주를 선정하여 절위별 개화진전 및 성숙과정과 엽의 황화 및 삭의 열개를 조사하였으며, 7/3 파종구에서는 개화시부터 5일 간격으로 매회40주씩 개화절위에 표식하여 이들로부터 5주씩 선정 5일 간격으로 표식된 절위의 삭에 대하여 길이, 굵기, 종실수, 삭 및 종실의 건물중 및 삭의 수분함량을 조사하였으며, 그 결과는 다음과 같다. 1. 최초 개화는 파종후 37~40일 부터 시작되었고 절위별 개화완료 소요 일수는 6/19 파종구에서 1.78일, 7/3 파종구에서 1.56일로 파종이 늦어짐에 따라 단축되었다. 2. 삭의 길이 및 굵기는 개화후 10 일경에 완성되었으며 종실수는 15 일경에 결정되었으나, 종실중은 개화후 15일부터 증가하기 시작하여 35 일경에 최대에 달하였다. 3. 평균기온 $20^{\circ}C$ 이하 및 엽의 50%가 황화되었을 때부터 종실중의 증가가 중지되었다.
기존에 차량용 안개등으로 사용되었던 할로겐 광원은 전력소모가 증가하고 수명이 짧기 때문에 이러한 단점을 극복하기 위해 자동차 광원은 LED로 점차 바뀌고 있다. 그러나 차량용 LED 안개등을 점등하였을 경우에는 LED에서 발생하는 고열로 인해 안개등 수명을 단축시키는 단점이 있다. 안개등 내부에서 LED에 의해 발생된 열은 주로 히트싱크에 의해 배출되지만, 나머지 열은 거의 대부분 대류를 통해 외부로 배출된다. 이러한 대류에 의한 냉각효율이 저하되면 열에너지는 램프의 주요부품인 렌즈, 리플렉터, 베젤 등에 열을 발생시키거나 LED 광원에 고온을 발생시켜 LED 안개등의 수명을 단축시킨다. 따라서, 본 연구에서는 히트싱크에 의한 방열방식 이외에도 냉각효율에 중요한 영향이 미치는 대류에 의한 방열성능을 개선하고자 하였다. 이를 위해 차량용 LED 안개등 내부공기를 외부로 흡·배출시킬수 있는 통풍구 설치 위치를 결정하기 위한 열유동해석을 수행하여 최적의 설계가 되도록 하였다. 공기의 평균속도는 기존 프로토타입인 Case1에 비해 Case3, Case2의 순으로 증가되었고 Case3의 증가폭이 다른 Case에 비해 상대적으로 큰 것을 알 수 있었다. 이는 안개등 상·하에 설치된 통풍구가 온도차이에 따라 생성되는 대류현상을 적절하게 유도하기 때문에 공기의 속도 증가와 함께 열을 효율적으로 배출시켰기 때문인 것으로 판단하였다.
본 논문에서는 무선 센서 네트워크에서 지연시간에 민감한 데이터를 실시간으로 전달하는 기법을 제안하였다. 실시간 전송을 위한 기존의 방식들은 단순히 전달 지연이 짧은 경로 혹은 홉 수가 작은 경로를 선택한다. 하지만, 이러한 방식들은 링크 에러율을 고려하지 않았으므로, 전송 오류가 발생하는 경우에는 재전송으로 인하여 실시간 전송을 보장하기 어렵다. 따라서, 본 논문에서는 링크 에러율을 고려하여 실시간 전송 경로를 선정하는 알고리즘을 제안하였다. 제안하는 기법은 이웃 노드들 간의 링크 에러율에 기반하여 홉 간의 전송 지연시간을 추정함으로써 종단 간 기대되는 지연시간을 계산한다. 소스 노드는 가장 짧은 전달 지연시간을 가진 경로를 실시간 경로로 선택하고 데이터를 전송한다. 링크의 에러율에 따른 다양한 실험을 통하여 제안 방식이 데이터 전달 속도를 향상시키고 지연 지터를 감소시킨다는 사실을 확인하였다. 또한, 전송 오류와 재전송의 상대적 인 감소로 인하여 에너지 소비가 줄어들고 네트워크 수명이 연장된다는 사실을 알 수 있었다.
본 연구에서는 220[V] 상용전원을 대체한 태양전지 모듈을 응용하고 등 기구는 할로겐 등이나 나트륨 등을 대체한 LED 조명을 이용한 저전력형 LED 보안등을 개발하였다. 또한 LED 구동제어기의 발열문제와 구동전류를 최소화할 수 있는 PWM형 구동제어회로를 설계하였다. 개발된 시스템에서, 광 효율에 대한 측정값은 93.6 [lm/W] 이고, LED 램프의 발열 제어를 위하여 제어기 내부에 고 정밀 온도센서(TC1047A)를 사용하였다. LED 조명등에서 발생하는 고열을 제거하기 위하여 금속 삽입형 방열 장치를 통하여 대기 속으로 신속하게 다중분산 시키도록 설계하였다. LED 조명등의 발열제어 온도 범위는 $50{\sim}55[^{\circ}C]$였다. LED 보안등의 광속 및 점등 속도는 0.5[sec] 이고 LED 램프의 빔 확산 각도는 높이 6[m]를 기준으로 하는 배광곡선에 의해 약 $110[^{\circ}]$의 빔 각도를 얻었다.
실리콘(Si)에 비해 상대적으로 밴드 갭이 작고, 열전도도가 낮으며, 기존의 Si 반도체 공정 기술과 호환이 가능한 실리콘-게르마늄(SiGe) 합금은 트랜지스터, 광수신 소자, 태양전지, 열전 소자 등 다양한 전자 소자에서 사용되고 있다. 본 논문에서는 SiGe 합금이 전자소자에 응용되는 원리 및 응용과 관련된 기술적인 논제들을 고찰한다. Si에 비해 밴드 갭이 작은 게르마늄(Ge)이 그 구성 원소인 SiGe 합금의 밴드 갭은 Si과 Ge의 분률과 상관없이 항상 Si의 밴드 갭 보다 작다. 이러한 SiGe의 작은 밴드 갭은 전류 이득의 손실 없이 베이스 두께를 감소시키는 것을 가능하게 하여 바이폴라 트랜지스터의 동작속도를 향상시킨다. 또한, Si이 흡수하지 못하는 장파장 대의 빛을 SiGe이 흡수하여 광전류를 생성하게 함으로써 태양전지의 변환효율을 증가시킨다. 질량이 서로 다른 Si 및 Ge 원소의 불규칙적인 분포에 의해 발생하는 포논 산란 효과 때문에 SiGe 합금은 순수한 Si 및 Ge과 비교할 때 낮은 열전도도를 갖는다. 낮은 열전도도 특성의 SiGe 합금은 전자 소자 구조 내에서의 열 손실을 억제하는데 효과가 있으므로 Si 반도체 공정 기반의 열전 소자의 구성 물질로서 활용이 기대된다.
LPG는 공기보다 무거워 지표면으로 가라앉는 특징이 있으며, 주변 공기가 체류하는 경우 증기운을 형성하기 쉬워 가스 누출로 인한 피해가 가중될 우려가 있다. 그러므로 증기운 형성에 따른 주변 지역의 영향 범위분석을 통해 피해를 예방할 필요가 있다. 본 연구에서는 LPG 공급 관리소가 설치된 제주 하가리 일대를 대상으로 토지이용 현황과 지형적 특성으로 생성되는 야간 시간대의 찬공기 흐름과 그에 따른 LPG 누출 특성을 고려하여 주변 지역으로의 피해 영향 범위를 분석하였다. KLAM_21을 활용하여 찬공기 흐름을 분석한 결과, 지형 영향으로 인해 남동쪽에서 약 2 m/s의 찬공기가 유입되었다. LPG 누출 특성은 ALOHA를 이용하였으며 찬공기 흐름을 고려하여 분석하였다. 풍속 2 m/s 조건에서 누출공 크기가 10 cm일 때 LEL 60 %(12,600 ppm)에 해당하는 범위는 61 m로 나타났으며 LPG 누출 시 증기운에 의한 화재 등의 사고가 발생하는 경우 누출원으로부터 50 m 부근에 위치한 인근 주거지에 피해가 미칠 것으로 예상되므로 사고 예방을 위한 대안책이 요구된다. 해당 연구결과는 LPG 누출로 인한 사고 발생 시 예방책을 마련하는데 기초 자료로 활용될 수 있으며 FLACS와 같은 CFD 모델링을 통해 비교적 좁은 영역에서의 LPG 누출 형상 및 증기운으로 인한 피해 영향 범위를 확인할 필요가 있다.
Nuclear accidents such as Fukushima Daiichi have highlighted the potential of passive safety systems to replace or complement active safety systems as part of the overall prevention and/or mitigation strategies. In addition, passive systems are key features of Small Modular Reactors (SMRs), for which they are becoming almost unavoidable and are part of the basic design of many reactors available in today's nuclear market. Nevertheless, their potential to significantly increase the safety of nuclear power plants still needs to be strengthened, in particular the ability of computer codes to determine their performance and reliability in industrial applications and support the safety demonstration. The PASTELS project (September 2020-February 2024), funded by the European Commission "Euratom H2020" programme, is devoted to the study of passive systems relying on natural circulation. The project focuses on two types, namely the SAfety COndenser (SACO) for the evacuation of the core residual power and the Containment Wall Condenser (CWC) for the reduction of heat and pressure in the containment vessel in case of accident. A specific design for each of these systems is being investigated in the project. Firstly, a straight vertical pool type of SACO has been implemented on the Framatome's PKL loop at Erlangen. It represents a tube bundle type heat exchanger that transfers heat from the secondary circuit to the water pool in which it is immersed by condensing the vapour generated in the steam generator. Secondly, the project relies on the CWC installed on the PASI test loop at LUT University in Finland. This facility reproduces the thermal-hydraulic behaviour of a Passive Containment Cooling System (PCCS) mainly composed of a CWC, a heat exchanger in the containment vessel connected to a water tank at atmospheric pressure outside the vessel which represents the ultimate heat sink. Several activities are carried out within the framework of the project. Different tests are conducted on these integral test facilities to produce new and relevant experimental data allowing to better characterize the physical behaviours and the performances of these systems for various thermo-hydraulic conditions. These test programmes are simulated by different codes acting at different scales, mainly system and CFD codes. New "system/CFD" coupling approaches are also considered to evaluate their potential to benefit both from the accuracy of CFD in regions where local 3D effects are dominant and system codes whose computational speed, robustness and general level of physical validation are particularly appreciated in industrial studies. In parallel, the project includes the study of single and two-phase natural circulation loops through a bibliographical study and the simulations of the PERSEO and HERO-2 experimental facilities. After a synthetic presentation of the project and its objectives, this article provides the reader with findings related to the physical analysis of the test results obtained on the PKL and PASI installations as well an overall evaluation of the capability of the different numerical tools to simulate passive systems.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.