• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.3
• /
• pp.38-46
• /
• 1990

A numerical solution method of the boundary integral equation for axisymmetric potential flows is presented. Those are represented by ring source and ring vorticity distribution. Strengths of ring source and ring vorticity are approximated by linear functions of a parameter $\zeta$ on a segment. The geometry of the body is represented by a cubic B-spline. Limiting integral expressions as the field point tends to the surface having ring source and ring vorticity distribution are derived upto the order of ${\zeta}ln{\zeta}$. In numerical calculations, the principal value integrals over the adjacent segments cancel each other exactly. Thus the singular part proportional to $\(\frac{1}{\zeta}\)$ can be subtracted off in the calculation of the induced velocity by singularities. And the terms proportional to $ln{\zeta}$ and ${\zeta}ln{\zeta}$ can be integrated analytically. Thus those are subtracted off in the numerical calculations and the numerical value obtained from the analytic integrations for $ln{\zeta}$ and ${\zeta}ln{\zeta}$ are added to the induced velocity. The four point Gaussian Quadrature formula was used to evaluate the higher order terms than ${\zeta}ln{\zeta}$ in the integration over the adjacent segments to the field points and the integral over the segments off the field points. The root mean square errors, $E_2$, are examined as a function of the number of nodes to determine convergence rates. The convergence rate of this method approaches 2.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.3
• /
• pp.116-126
• /
• 1993

The finite element method(FEM) has been commonly used for structural dynamic analysis. However, the direct global application of FEM to large complex structures such as ships and offshore structures requires considerable computational efforts, and remarkably more in structural dynamic optimization problems. Adoption of the component-mode synthesis method is an efficient means to overcome the above difficulty. Among three classes of the component-mode synthesis method, the free-interface mode method is recognized to have the advantages of better computational efficiency and easier implementation of substructures' experimental results, but the disadvantage of lower accuracy in analytical results. In this paper, an advanced method to improve the accuracy in the application of the free-interface mode method for the vibration analysis of large complex structures is presented. In order to compensate the truncation effect of the higher modes of substructures in the synthesis process, both residual inertia and stiffness effects are taken into account and a frequency shifting technique is introduced in the formulation of the residual compliance of substructures. The introduction of the frequency shrift ins not only excludes cumbersome manipulation of singular matrices for semi-definite substructural systems but gives more accurate results around the specified shifting frequency. Numerical examples of typical structural models including a ship-like two dimensional finite element model show that the analysis results based on the presented method are well competitive in accuracy with those obtained by the direst global FEM analysis for the frequencies which are lower than the highest one employed in the synthesis with remarkably higher computational efficiency and that the presented method is more efficient and accurate than the fixed-interface mode method.

• Korean Journal of Plant Resources
• /
• v.21 no.3
• /
• pp.184-191
• /
• 2008

This experiments were carried out to find out the effects of different explant materials, kinds and concentration of plant growth regulators, and total nitrogen and sucrose contents on the in vitro regeneration of Abeliophyllum distichum Nakai. The effects of growth regulators on regeneration from 3 explant sources (leaf, internode and node) were more or less same. Leaf explants produced only callus with 2ip (Isopentenyladenine) and NAA (Naphthaleneacetic acid) treatment and other regulators had no effects. Test with internode explants yielded about same results but callus was obtained with 2,4-D (2,4-Dichlorophenoxyacetic acid). Node explants resulted in shoot regeneration by all regulator treatment except NAA and 2,4-D, but control also showed similar results. Callus formation from internode and node explants was vigorous by 2ip, zeatin, and 2,4-D treatments and high NAA concentration resulted in higher callus formation. In this experiment, various mixed treatment of growth regulators were also employed, using node as explant material. Shoot regeneration was obtained with BA (Benzyl adenine) + NAA treatments but the results were comparable with control. Generally shoot and root regeneration was poor with all combined treatment except 2ip + NAA and 2,4-D + NAA. However, callus was formed readily with all treatments. In this experiment, combined treatments of regulators were applied on the callus derived from singular regulator treatment. The results showed no shoot and root regeneration with any combination of 2,4-D, IAA (Indoleacetic acid) and NAA, but soft milky white callus was formed in all the treatments. No shoot and root regeneration was observed with any combination of 2iP, NAA and IAA, but somewhat hard, light green callus was formed in all the treatments. Callus formation decreased with high kinetin concentration in case of kinetin + NAA treatment. The experiments with total nitrogen content of media showed that low concentrations of 15 and 30mM were effective for the shoot and root regeneration. Sucrose experiment demonstrated shoot regeneration with 1${\sim}$4% concentration, and root and callus formation with 2${\sim}$4%. No root and callus formation was observed with 0 and 1% sucrose.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.548-558
• /
• 2019

Along generalization of internet news comments, malicious comments have been spread and made many social problems. Because writings reflect human mental state or trait, analyzing malicious comments, human mental states could be inferred when they write internet news comments. In this study, we analyzed malicious comments of English and Korean speaker using LIWC and KLIWC. As a result, in both English and Korean, malicious comments are commonly more used in sentence, word phrase, morpheme, word phrase per sentence, morpheme per sentence, positive emotion words, and cognitive process words than normal comments, and less used in the third person singular, adjective, anger words, and emotional process words than normal comments. This means people are state that they can not control their feeling such as anger and can not think well when they write news comments. Therefore, when internet comments were written, service provider should consider the way that commenters monitor own writings by themselves and that they prevent the other users from getting close to comments included many negative-emotion words. In other sides, it is discovered that English and Korean malicious comments was discriminated by authenticity. In order to be more objective, gathering data from various point of time is needed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.4
• /
• pp.215-222
• /
• 2019

The heat conduction problem with discontinuous material coefficients generally consists of the conservative equation, boundary condition, and interface condition, which should be additionally satisfied in the solution procedure. This feature often makes the development of new numerical schemes difficult as it induces a layered singularity in the solution fields; thus, a special approximation is required to capture the singular behavior. In addition to the approximation, the construction of a total system of equations is challenging. In this study, a wedge function is devised for enriching the approximation, and the interface condition itself is embedded in the moving least squares(MLS) derivative approximation to consistently satisfy the interface condition. The heat conduction problem is then discretized in a strong form using the developed derivative approximation, which is named as the interface immersed MLS difference method. This method is able to efficiently provide a numerical solution for such interface problems avoiding both numerical quadrature as well as extra difference equations related to the interface condition enforcement. Numerical experiments proved that the developed numerical method was highly accurate and computationally efficient at solving the heat conduction problem with interfacial jump as well as the problem with a geometrically induced interfacial singularity.

• Korean Journal of Heritage: History & Science
• /
• v.38
• /
• pp.359-385
• /
• 2005

Red ocher, red lead or cinnabar has been as red colorant for ages. Cinnabar of the red pigments has been highly regarded as a valuable ingredient because it represent a symbol of exorcising and a haute image. It was used as a pigment of painting and mural painting, bowl, clothes, rock writing, gravestone, etc. It is powder which dissolves in perilla oil or glue before using. Because it is high-priced, the use of cinnabar may be limited to the privileged class. Therefore, red ocher or red lead was used instead of cinnabar. "Gongsagyunmunrok" demonstrated that government official's gravestonea has been painted red by two colorants in the period of the Goryeo dynasty. However, cinnabar may be used to paint gravestones for the first time in the period of the Three States because it has been transmitted since the times. This study discuss the results obtained from an analysis of the pigments used on the red pigments of the Stone Monuments. The results can be briefly summarized as below; First, the microcrystalline structures seen on the surface section of analyzed pigments, samples of which were taken from various parts of red pigments show that different sizes and shapes of pigment particle. Second, a result of the analysis on the composition and structure of the pigments shows that the main components in their composition are : Red pigments - Red lead($Pb_3O_4$), Cinnabar(HgS) and Hematite($Fe_2O_3$) White pigments - Calcite($CaCO_3$) Especially, we knew that red Stone Monuments were found to be natural mineral pigments, which were used as a singular or a mixture.

• Journal of Platform Technology
• /
• v.9 no.3
• /
• pp.52-62
• /
• 2021

Quality control is critical at manufacturing sites and is key to predicting the risk of quality defect before manufacturing. However, the reliability of manual quality control methods is affected by human and physical limitations because manufacturing processes vary across industries. These limitations become particularly obvious in domain areas with numerous manufacturing processes, such as the manufacture of major nuclear equipment. This study proposed a novel method for predicting the risk of quality defects by using natural language processing and machine learning. In this study, production data collected over 6 years at a factory that manufactures main equipment that is installed in nuclear power plants were used. In the preprocessing stage of text data, a mapping method was applied to the word dictionary so that domain knowledge could be appropriately reflected, and a hybrid algorithm, which combined n-gram, Term Frequency-Inverse Document Frequency, and Singular Value Decomposition, was constructed for sentence vectorization. Next, in the experiment to classify the risky processes resulting in poor quality, k-fold cross-validation was applied to categorize cases from Unigram to cumulative Trigram. Furthermore, for achieving objective experimental results, Naive Bayes and Support Vector Machine were used as classification algorithms and the maximum accuracy and F1-score of 0.7685 and 0.8641, respectively, were achieved. Thus, the proposed method is effective. The performance of the proposed method were compared and with votes of field engineers, and the results revealed that the proposed method outperformed field engineers. Thus, the method can be implemented for quality control at manufacturing sites.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.213-227
• /
• 2021

The purpose of this study is to identify factors that are causal and intention to revisit healing agricultural facilities and to identify the relationship between factors. the effect of experience type was analyzed on revisit intention by using facility experience satisfaction as a meditator for healing agriculture participants. The sub-variables of experience types were divided into educational experience, devious experience, entertainment experience, and aesthetic experience. 259 questionnaires collected from the people who experienced healing agriculture programs in the whole country were used for empirical analysis. The PROCESS macro v3.4 and SPSS v22.0 were used to analyze based on the singular simple mediation model which contains a single mediator. First, all types of experience had a positive (+) effect on satisfaction. Second, satisfaction had a positive (+) effect on revisit intention independently of experience type. Third, all types of experience had a positive (+) effect on revisit intention. Fourth, satisfaction mediated between experience type and revisit intention except for deviating experience among experience types. As a follow-up study, it is necessary to study for the adjustment of mediators other than the mediator introduced in the study or the controlled mediated analysis through the conditional process model in which the moderator variable is introduced.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.67-74
• /
• 2023

Recently, Urban Aircraft Mobility (UAM) has been attracting attention as a transportation system of the future, and small drones also play a role in various industries. The failure of various types of aviation systems can lead to crashes, which can result in significant property damage or loss of life. In the defense industry, where aviation systems are widely used, the failure of aviation systems can lead to mission failure. Therefore, this study proposes an anomaly detection model using deep learning technology to detect anomalies in aviation systems to improve the reliability of development and production, and prevent accidents during operation. As training and evaluating data sets, current data from aviation systems in an extremely low-temperature environment was utilized, and a deep learning network was implemented using the convolutional neural network, which is a deep learning technique that is commonly used for image recognition. In an extremely low-temperature environment, various types of failure occurred in the system's internal sensors and components, and singular points in current data were observed. As a result of training and evaluating the model using current data in the case of system failure and normal, it was confirmed that the abnormality was detected with a recall of 98 % or more.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.143-151
• /
• 2010

Fingerprint classification is a step to increase the efficiency of an 1:N fingerprint recognition system and plays a role to reduce the matching time of fingerprint and to increase accuracy of recognition. It is difficult to classify fingerprints, because the ridge pattern of each fingerprint class has an overlapping characteristic with more than one class, fingerprint images may include a lot of noise and an input condition is an exceptional case. In this paper, we propose a novel approach to design a stochastic model and to accomplish fingerprint classification using a directional characteristic of fingerprints for an effective classification of various qualities. We compute the directional value by searching a fingerprint ridge pixel by pixel and extract a directional characteristic by merging a computed directional value by fixed pixels unit. The modified Markov model of each fingerprint class is generated using Markov model which is a stochastic information extraction and a recognition method by extracted directional characteristic. The weight list of classification model of each class is decided by analyzing the state transition matrixes of the generated Markov model of each class and the optimized value which improves the performance of fingerprint classification using GA (Genetic Algorithm) is estimated. The performance of the optimized classification model by GA is superior to the model before the optimization by the experiment result of applying the fingerprint database of various qualities to the optimized model by GA. And the proposed method effectively achieved fingerprint classification to exceptional input conditions because this approach is independent of the existence and nonexistence of singular points by the result of analyzing the fingerprint database which is used to the experiments.