• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.2
• /
• pp.122-127
• /
• 2013

The paper includes the analytic results of pressure fluctuation data from the combustion of an oxidizer-rich preburner applicable to high-performance, closed-cycle liquid rocket engine systems. The combustion experiments went through two different steps of a chamber pressure during single run. Self-excited pressure fluctuations with a frequency of 78 Hz were observed only at the relatively low chamber pressure condition. These pressure fluctuations are regarded as a bulk mode. The intensity of pressure fluctuations by a root-mean-square value is 13.3% normalized by the chamber static pressure and no pressure excitation was observed at the design pressure condition. The bulk mode has an identical phase across the inside of the chamber and reveals the similar characteristics to the Helmholtz resonator.

• Journal of Magnetics
• /
• v.20 no.1
• /
• pp.26-30
• /
• 2015

The crystallographic and magnetic properties of gallium-substituted cobalt ferrite ($CoGa_xFe_{2-x}O_4$) were investigated. The new material was synthesized using conventional ceramic methods, with gallium substituted for ferrite in the range of x = 0.0 to 1.0, in steps of 0.2. X-ray diffraction and M$\ddot{o}$ssbauer spectroscopy were used to confirm the presence of crystallized particles in the $CoGa_xFe_{2-x}O_4$ ferrite powders. All of the samples exhibited a single phase with a spinel structure, and the lattice parameters decreased as the gallium content increased. The particle size of the samples also decreased as gallium increased. For $x{\leq}0.4$, the M$\ddot{o}$ssbauer spectra of $CoGa_xFe_{2-x}O_4$ could be fitted with two Zeeman sextets, which are the typical spinel ferrite spectra of $Fe^{3+}$ with A- and B-sites. However, for $x{\geq}0.6$, the M$\ddot{o}$ssbauer spectra could be fitted with two Zeeman sextets and one doublet. The variation in the M$\ddot{o}$ssbauer parameters and the absorption area ratio indicated a cation distribution of $(Co_{0.2-0.2x}Ga_xFe_{0.8-0.6x})[Co_{0.8+0.2x}Fe_{1.2-0.4x}]O_4$, and the magnetic behavior of the samples suggested that the increase in gallium content led to a decrease in the saturation magnetization and in the coercivity.

• Nuclear Engineering and Technology
• /
• v.37 no.4
• /
• pp.375-384
• /
• 2005

To investigate the flow-accelerated corrosion (FAC) dependency of carbon steel (A106 Gr. B) and low-alloy steels (1Cr-1/2Mo, 21/4Cr-1Mo) on pH, orifice distance, and material, experiments were carried out. These experiments were performed using a flow velocity of 4 m/sec (partly 9 m/sec) at pH $8.0\~10.0$ in an oxygen-free aqueous solution re-circulated in an Erosion-Corrosion Test Loop at $130^{\circ}\;{\ldots}$ for 500 hours. The weight loss of the carbon steel specimens appeared to be positively dependent on the flow velocity. That of the carbon and low-alloy steel specimens also showed to be distinguishably dependent on the pH. At pH levels of $8.0\~9.5$ it decreased, but increased from 9.5 to 10.0. Utility water chemistry personnel should carefully consider this kind of pH dependency to control the water system pH to mitigate FAC of the piping system material. The weight loss of the specimens located further from the orifice in the distance range of $6.8\~27.2$ mm was shown to be greater, except for 21/4Cr-1Mo, which showed no orifice distance dependency. Low alloy steel specimens exhibited a factor of two times better resistance to FAC than that of the carbon steel. Based on this kind of FAC dependency of the carbon and low-alloy steels on the orifice distance and material, we conclude that it is necessary to alternate the composition of the secondary piping system material of NPPs, using low-alloy steels, such as 21/4Cr-1Mo, particularly when the system piping has to be replaced.

• Korean Journal of Optics and Photonics
• /
• v.13 no.5
• /
• pp.400-407
• /
• 2002

Two dimensional solitary waves are stably propagated in a saturable medium which has a saturable nonlinear index as input intensity. However, in the case of low intensity. a negative fifth-order nonlinear medium has properties of a saturable medium. So a Gaussian beam travels stably. The propagation process into the fifth order nonlinear medium of the Gaussian beam with a weak intensity is investigated by using the computer simulation of the two-dimensional nonlinear Schrodinger equation. As a result, it is confirmed that the two-dimensional spatial solitary waves are stably propagated in this medium when the incident powers are self-trapping powers. In the condition of the phase difference and collisional angle between two input beams of 180 degree and 0.05 degree, respectively, we can confirm that all optical switching is as simple as controlling the incident power of one input beam.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1998

Transportation provides an infrastructure vital to economic growth, and it is also an integral part of production. As a port is regarded as the interface between the maritime transport and domestic transport sectors, it certainly play a key role in any economic development. Ship's delay caused by port congestion has recently has recently attracted attended with the analysis of overall operation in port. In order to analyse complicated port operation which contains large number of variable factors, queueing theory is needed to be adopted, which is applicable to a large scale transportation system in chiding ship's delay in Inchon port in relation to ship's delay problem. The overall findings are as follows ; 1. The stucture of queueing model in this port can be represented as a complex of multi-channel single-phase 2. Ship's arrival and service pattern were Poisson Input Erlangian Service. 3. The suitable formula to calculate the mean delay in this port, namely, $W_q={\frac{{\rho}}{{\lambda}(1-{\rho})}}{\frac{e{\small{N}}({\rho}{\cdot}N)}{D_{N-1}({\rho}{\cdot}N)}}$ Where, ${\lambda}$ : mean arrival rate ${\mu}$ : mean servicing rate N : number of servicing channel ${\rho}$ : utilization rate (l/Nm) $e{\small{N}}$ : the Poisson function $D_{(n-1)}$ : a function of the cumulative Poisson function 4. The utility rate is 95.0 percents in general piers, 75.39 percents in container piers, and watiting time 28.43 hours in general piers, 13.67 hours in container piers, and the length of queue is 6.17 ships in general piers, 0.93 ships in container piers, and the ship turnaround time is 107.03 hours in general piers, 51.93 hours in container piers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.699-708
• /
• 2021

In this paper, the aerodynamic and aeroacoustic characteristics that vary depending on the rotation axial distance between the upper and lower rotor, which is one of the design parameters of the coaxial rotor, is analyzed in the hovering condition using the computational fluid dynamics. Aerodynamic analysis using the Reynolds Averaged Navier Stokes equation and the aeroacoustic analysis using the Ffowcs Williams ans Hawkings equation is performed and the results were compared. The upper and lower rotor of the coaxial rotor have different phase angle which changes periodically by rotation and have unsteady characteristics. As the distance between the upper and lower rotors increased, the aerodynamic efficiency of the thrust and the torque was increased as the flow interaction decreased. In the aeroacoustic viewpoint, the noise characteristics radiated in the direction of the rotational plane showed little effect by axis spacing. In the vertical downward direction of the axis increased, the SPL maintains its size as the frequency increases, which affects the increase in the OASPL. As the axial distance of the coaxial rotor increased, the noise characteristics of a coaxial rotor were similar with the single rotor and the SPL decreased significantly.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.143-148
• /
• 2018

In this paper, we propose a personalized user authentication system (PUAS) that can be used in multiple stages in user authentication by customizing the password keyword to be used in user authentication. The proposal concept is that the user oneself defines the password keyword to be used in user authentication so as to cope with a passive retransmission attack which reuses the password obtained when the server system is accessed in user authentication. The authentication phase is also designed so that it can be expanded in multiple stages in a single step. Also, it is designed to store user-defined password related information in an arbitrary encrypted place in the system, thereby designing to disable the illegal access of the network. Therefore, even if an intruder accesses the system using the proposed system, it is possible to generate personal authentication information by generating a password keyword through unique personal information possessed only by an individual and not know the place where the generated authentication information is stored, It has a strong security characteristic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.5
• /
• pp.373-379
• /
• 2019

If two signals with the same single-tone frequency and differing phases impinge simultaneously on an antenna at slightly differing angles, then a large error in the angle estimation might occur if the phase difference is either $0^{\circ}$ or $180^{\circ}$. This phenomenon might arise with an airborne fire-control radar, which has a relatively small bandwidth, for a low-flying target over the sea or terrain surface. In this paper, we show that the $Cram{\acute{e}}r$-Rao lower bound for such a target can be significantly lowered with the use of two frequencies.

• Food Science of Animal Resources
• /
• v.39 no.1
• /
• pp.93-101
• /
• 2019

Nucleotides play important roles in numerous intracellular biochemical processes and are used in infant formulas and other dairy products. However, domestic analytical methods for assessing nucleotide content in products have not yet been established, and therefore, methods for determining nucleotide content are urgently required. A rapid and simple analytical method for determining the content of five types of nucleotides in dairy products was improved using solid phase extraction clean-up and high-performance liquid chromatography with diode array detector. The extraction solvent used in the AOAC method was not well dissolved and was changed to hydrophilic EDTA-Na. In addition, the results obtained using the isocratic elution method and a single wavelength were similar to those obtained using the AOAC method, and the time taken for analysis was shortened from 40 min to 25 min. The process of method validation revealed the following parameters: accuracy (84.69%-102.72%), precision (1.51%-6.82%), linearity (0.999), and limit of detection (cytidine 5'-monophosphate, 0.09 mg/L; uridine 5'-monophosphate, 0.11 mg/L; adenosine 5'-monophosphate, 0.12 mg/L; guanosine 5'-monophosphate, 0.11 mg/L; and inosine 5'-monophosphate, 0.14 mg/L). The method was also used to determine the nucleotide concentration in 25 samples (infant formulas, 1.99-29.39 mg/100 g; and cow milk, 0.28-0.83 mg/100 g). The newly improved method was appropriate for analyzing nucleotides in infant formulas and other dairy products faster when compared to conventional methods.

• Journal of Powder Materials
• /
• v.26 no.1
• /
• pp.34-39
• /
• 2019

Current synthesis processes for titanium dioxide ($TiO_2$) nanoparticles require expensive precursors or templates as well as complex steps and long reaction times. In addition, these processes produce highly agglomerated nanoparticles. In this study, we demonstrate a simple and continuous approach to synthesize $TiO_2$ nanoparticles by a salt-assisted ultrasonic spray pyrolysis method. We also investigate the effect of salt content in a precursor solution on the morphology and size of synthesized products. The synthesized $TiO_2$ nanoparticles are systematically characterized by X-ray diffraction, transmission electron micrograph, and UV-Vis spectroscopy. These nanoparticles appear to have a single anatase phase and a uniform particle-size distribution with an average particle size of approximately 10 nm. By extrapolating the plots of the transformed Kubelka-Munk function versus the absorbed light energy, we determine that the energy band gap of the synthesized $TiO_2$ nanoparticles is 3.25 eV.