• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.33-43
• /
• 2013

This paper proposes a distributed MAC protocol called Carrier Sensing Multiple Access with Collision Resolution (CSMA/CR) considering fully-connected single hop network environments for next-generation wireless LAN with high density of stations. The proposed CSMA/CR is compatible with the conventional MAC protocols by observing the operation of CSMA/CA and is able to detect a collision promptly without RTS/CTS exchange by applying the technique of CSMA/CD to wireless environments. Moreover, once a collision is detected, the dedicated resource is allocated to the next transmission and so the collision that may occur again is resolved. We investigate some implementation issues for the practicality of CSMA/CR and compare it with the typical distributed MAC protocols. The simulation results show that the proposed CSMA/CR has a low overhead as detecting a collision without the RTS/CTS exploitation and achieves always the best throughput regardless of the number of access stations, by using the reservation-based collision resolution technique.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.113-116
• /
• 2001

In this paper, a new multicasting scheduling is proposed for WDM single-hop broadcast network. The main idea of traditional multicast scheduling algorithms is partitioning the multicast group into several subgroups to reduce the delay time after receiving previous message. Those partitioning algorithms are grouping method of receivers already tuned to transmitters wavelength. However, multicast scheduling shows better performance by considering the previous status of receivers. Thus, in this paper, a new subgrouping method is proposed to minimize delay through collecting the current status of receivers. This method is operated by using the tunable transceiver in WDM single hop broadcasting network and uses fixed control channel for collecting the status of receivers. In addition, we analyzed the performance of proposed method through the computer simulation and then compared with existing multicast scheduling algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1033-1036
• /
• 2013

A study about collision resolution is needed because huge file, video and multimedia information are transmitted to wireless LAN. CSMA/CR protocol guarantees fairness, but doesn't consider QoS. To practicalize CSMA/CR protocol in saturation fully-connected single hop network environments, this paper proposes method of collision compensation. previous CSMA/CR protocol chooses CR Slot only considering fairness, but this paper chooses front CR Slot for compensation of collision to station experiencing collisions. The station transmits jam signal and has channel priority of transmission. So transmitting efficiency and successful transmission probability rise. This proposed simple method can offer benefit to station experiencing collisions without additional hardware cost.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.178-202
• /
• 2012

In this paper, we first survey cross-layer architectures for Wireless Sensor Networks (WSNs) and Wireless Multimedia Sensor Networks (WMSNs). Afterwards, we propose a novel cross-layer architecture for QoS provisioning in clustered and multi-hop based WMSNs. The proposed architecture provides support for multiple network-based applications on a single sensor node. For supporting multiple applications on a single node, an area in memory is reserved where each application can store its network protocols settings. Furthermore, the proposed cross-layer architecture supports heterogeneous flows by classifying WMSN traffic into six traffic classes. The architecture incorporates a service differentiation module for QoS provisioning in WMSNs. The service differentiation module defines the forwarding behavior corresponding to each traffic class. The forwarding behavior is primarily determined by the priority of the traffic class, moreover the service differentiation module allocates bandwidth to each traffic class with goals to maximize network utilization and avoid starvation of low priority flows. The proposal incorporates the congestion detection and control algorithm. Upon detection of congestion, the congested node makes an estimate of the data rate that should be used by the node itself and its one-hop away upstream nodes. While estimating the data rate, the congested node considers the characteristics of different traffic classes along with their total bandwidth usage. The architecture uses a shared database to enable cross-layer interactions. Application's network protocol settings and the interaction with the shared database is done through a cross-layer optimization middleware.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.1
• /
• pp.1-8
• /
• 2019

Background: PNF patterns are the basis of human motion and can be expected to improve joint motion and coordination. Combined physical training with CLX training and PNF patterns can help to improve balance and perform functional mobility in the lower limb. The purpose of this study is to confirm the effect of CLX training combined with PNF pattern on balance ability. Design: Randomized Controlled Trial. Methods: Total 16 persons participate in this study and were randomly divided in two groups the experimental group and control group. In the experimental group, exercise program with PNF pattern and CLX was performed total 24 times for 8 weeks. In the exercise program, the PNF pattern composed of D1F and D2F was applied with CLX in five positions. Single limb hop test, Y-balance test and Balance Error scoring system were performed to evaluate the balance ability according to the interventions. Results: In the single limb hop, the experimental group revealed a significant difference than a control group (p<0.05).The result of balance error scoring system, experimental group revealed significant differences between before and after training and revealed significant differences than a control group (p<0.05). In the Y-balance test, the experimental group revealed significant differences than a control group in both side. Conclusion: The results of this study showed that the CLX exercise in combination with the PNF pattern had a positive effect on enhancing the balance ability of the normal adult and performing the functional mobility of the lower limb.

• Journal of Computing Science and Engineering
• /
• v.7 no.4
• /
• pp.231-241
• /
• 2013

Improvements in wireless sensor network (WSN) technology have resulted in a large number of applications. WSNs have been mainly used for monitoring applications, but they are also applicable to target tracking, health care, and monitoring with multimedia data. Nodes are generally deployed in environments where the exhausted batteries of sensor nodes are difficult to charge or replace. The primary goal of communication protocols in WSNs is to maximize energy efficiency in order to prolong network lifetime. In this paper, various medium access control (MAC) protocols for synchronous/asynchronous and single/multi-channel WSNs are investigated. Single-channel MAC protocols are categorized into synchronous and asynchronous approaches, and the advantages and disadvantages of each protocol are presented. The different features required in multi-channel WSNs compared to single-channel WSNs are also investigated, and surveys on multi-channel MAC protocols proposed for WSNs are provided. Then, existing broadcast schemes in such MAC protocols and efficient multi-hop broadcast protocols proposed for WSNs are provided. The limitations and challenges in many communication protocols according to this survey are pointed out, which will help future researches on the design of communication protocols for WSNs.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.9-11
• /
• 2010

Multiple-input multiple-output (MIMO) systems assisted by multi-relays with single antenna are considered. Signal transmission consists of two hops. In the first hop, the source node broadcasts the vector symbols to all relays, then all relays forward the received signals multiplied by each power gain to the destination simultaneously. Unlike the case of full cooperation between relays such as single relay with multiple antennas, in our case there is no closed form solution for optimal relay power gain with respect to minimum mean square error (MMSE). Thus we propose an alternative approach in which we use an approximation of the cost function based on rank-one matrix decomposition. As a cost function, we choose the trace of MSE matrix. We give several simulation results to validate that our proposed method obtains a negligible performance loss compared to optimal solution obtained by exhaustive search.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.17-26
• /
• 2013

ISO/IEC 29157 originally developed in the Republic of Korea and is based on commercially available PicoCast v1.0. ISO/IEC JTC1 SC6 was registered by the international standard on May 2010. A single platform for a variety of applications and media formats to support development objectives were. ISO/IEC 29157 based wireless networks, ie, Pico-net to master node periodically transmit sync signal is synchronized to the number of slave nodes have the communications structure. Pico-net also supports a variety of network topologies and direct communication between nodes(single-hop communication) and QoS is guaranteed. But Pico-net network structure has the following problems. Loss of communication problems due to mobile nodes, resulting in limitations of node mobility and wireless network operation range of conventional wireless networks operating range less than 1/4 was reduced to the problem. In this paper, a possible solution to the problems mentioned is proposed, using multi-hop communication technology and sync signal transmission technology between nodes.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.583-588
• /
• 2007

It is easy to implement a temporary network with a mobile ad-hoc network in which mobile nodes have without using a infrastructure network. They depend on their limited power. Recently, it is a hot issue to save the energy in a mobile ad-hoc network because a mobile nodes have a limited energy. Research of IEEE 802.11 PSM was proposed in a single hop ad-hoc assumption. If IEEE 802.11 PSM is applied to multi hop ad-hoc network, non-optimal paths will be generated by the mobile nodes which didn't receive a message of routing request. Non-optimal paths increase not only a network latency but also energy consumption of mobile nodes. Reconfiguring algorithm of non-optimal paths caused by the mobile nodes which didn't receive a message of routing request is proposed in this paper. A mobile node can overhear the data in his range. A wireless medium is shared by all mobile nodes using the same bandwidth. All mobile nodes lookout the non-optimal paths with these properties of a medium, if non-optimal path is generated, optimal reconfiguring will be accomplished by modifying routing table of itself or sending a request message of routing update to nearby nodes. By reconfiguring the non-optimal paths to optimized ones, network latency and energy consumption was decreased. It is confirmed to ignore the overhead caused by a algorithm presented in this paper through the result of the simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.403-410
• /
• 2008

In this paper, we investigate the performance of MMR system in Non-transparent mode. The IEEE 802.16j MMR system has two node of operation, Single-frame (in band) and Multi-frame (out band) mode. In the analysis, we assume that channel interference between MR-BS and RS, or between RSs anywhere in the given area is ignored. The performance is presented in terms of the delay and the frame efficiency by varying number of RS and BS coverage to RS coverage ratio and the maximum coverage area of a BS by varying traffic density. Analytical results show that the Single-frame is more efficient than Multi-frame in frame efficiency and coverage extension.