• 전력전자학회논문지
• /
• 제22권2호
• /
• pp.118-125
• /
• 2017

In this paper, we propose a smart transformer for a smart transformer miniature model, which can replace a 60 [Hz] single-phase transformer installed in an electric vehicle. The proposed smart transformer is lighter than a conventional transformer, can control instantaneous voltage, and can be expected to improve power quality through harmonic compensation. The proposed intelligent transformer consists of an incoming part, an AC/DC converter, and a dual active bridge. Only the incoming part and the AC/DC converter are described in this paper. The proposed intelligent transformer has 75 kVA 3.3 kV input and 750 V DC output, which are verified by simulation and experiment.

• Nuclear Engineering and Technology
• /
• 제36권2호
• /
• pp.127-141
• /
• 2004

Various types of integrated steam generators, which integrate IHTS and a steam generator into a single unit of equipment for an LMR, were analyzed using an analytic solution with some simplification. The analysis showed that the undesirable reversed heat transfer, of which occurrence was previously observed only in an integrated single-region bundle type, can also occur in an integrated double-region bundle type. The mechanism of the reversed heat transfer occurrence in the double-region type is explained and it is shown the mechanism in the double-region type is completely different from that in the single-region type. Based on this finding, a method for preventing the aforementioned heat transfer is suggested. The performance of the four types of the integrated steam generators is assessed. For this assessment, a SG is actually designed for each type and the optimization in the geometric parameters and flow rate are optimized.

• Applied Microscopy
• /
• 제40권1호
• /
• pp.21-28
• /
• 2010

단층 및 복층의 그래핀에 대한 원자분해 투과전자현미경 영상 시뮬레이션 연구에서, 통상의 Boch-wave 방법에 의한 영상이론식들이 고 준위 Laue 영역의 역 격자 회절을 적절히 포함 했을 때 시뮬레이션에 잘 적용될 수 있음을 보여 주었다. 적절한 조건에서 복층 그래핀의 시뮬레이션 영상들은 육방정계의 대칭성 보다는 삼방정계의 대칭성을 보여 주었다. 이 결과는 복층 그래핀이 3차원 공간에서 [0001] 축 방향 회전에 대해 갖는 삼방정계의 격자 대칭성이 영상에 구현되는 것으로 이해될 수 있다. 단층 그래핀에 대해서는, 관측 위상영상이 삼방정계의 대칭성을 보여주는 현상들이 특히 주목되었다. 이 현상은 그래핀 표면에 전자 밀도의 재 배치에 의한 것으로 설명되었다. 그리고 그래핀의 전자 재 배치를 반영하는, 다만 2번째 Laue 준위 영역의 회절 빔까지만 포함하면 관측 영상과 일치하는 시뮬레이션 위상 영상이 얻어졌다.

• 한국광학회지
• /
• 제15권6호
• /
• pp.583-590
• /
• 2004

비전을 이용한 광학식 검사공정이나 그 밖의 광학 현미경을 이용한 측정에 있어서 초점조절은 곧바로 측정 정밀도에 영향을 주는 중요한 요소이다. 본 논문에서는 핀홀 대신 광섬유를 사용하는 공초점 현미경 구조와 하나의 광섬유가 광원과 검출기의 역할을 동시에 수행하는 상반구성(reciprocal scheme)을 적용함으로써 간결하게 시스템을 구성하면서 광축 정렬을 용이하게 하였으며, 압전소자(PZT)를 이용한 광섬유 광원의 광축 방향 변조를 통해 방향 정보가 실린 초점오차 신호를 획득함으로써 빠른 초점조절을 구현하였다. 대물렌즈 변조방식과 달리 광원 변조방식은 현미경 시스템에 미치는 물리적 영향을 줄일 수 있으며, 기존의 장치에 탑재가 비교적 용이하다는 장점을 갖는다. 본 논문에서는 변조 진폭과 시편의 반사도 및 기울기 변화에 따른 초점오차 신호의 변화를 측정하였으며, 거울 시편에 대한 초점조절을 통해 본 시스템의 성능을 평가해 보았다. 또한 종방향 특성곡선의 반치폭 비교실험을 통해 광원 변조는 광축 방향 분해능에 영향을 주지 않음을 확인하였다.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.271-278
• /
• 2016

Recently, reverse osmosis (RO) is the most common process for seawater desalination. A common problem in both RO and thermal processes is the high energy requirements for seawater desalination. The one energy saving method when utilizing the osmotic power is utilizing pressure retarded osmosis (PRO) process. The PRO process can be used to operate hydro turbines for electrical power production or can be used directly to supplement the energy required for RO desalination system. This study was carried out to evaluate the performance of both single-stage PRO process and two-stage PRO process using RO concentrate for a draw solution and RO permeate for a feed solution. The major results, were found that increase of the draw and feed solution flowrate lead to increase of the production of power density and water permeate. Also, comparison between CDCF and CDDF configuration showed that the CDDF was better than CDCF for stable operation of PRO process. In addition, power density of two-stage PRO was lower than the one of single-stage. However, net power of two-stage PRO was higher than the one of single-stage PRO.

• 한국측량학회지
• /
• 제38권4호
• /
• pp.305-315
• /
• 2020

본 연구는 사진측량, 컴퓨터 비전, 로보틱스 등의 분야에서 사용되는 외부표정요소를 결정하는 단사진의 후방교회법의 알고리즘을 비교하는 것이 목적이다. 이를 위해 항공사진 및 근거리 사진측량에서 사용되고 있는 카메라를 기준으로 지형을 시뮬레이션하여 실험 데이터를 생성하여 알고리즘을 비교하였다. 거의 수직으로 촬영되는 항공사진측량용 카메라에 대한 실험을 통해서 3개의 지상기준점으로도 외부표정요소를 결정할 수 있었으나 프로쿠르스테스 알고리즘은 지상기준점 배치에 민감하였다. 카메라의 자세각이 크게 변하는 근거리 사진측량용 카메라를 대상으로한 실험에서도 프로쿠르스테스 알고리즘의 지상기준점 배치에 민감하였으며 모든 알고리즘이 적어도 6개의 지상기준점이 필요하였다. 두 종류의 카메라를 대상으로 한 실험을 통해서 코사인법칙 기반의 후방교회법은 반복회수가 짧고 명시적인 초기값이 필요하지 않기 때문에 전통적인 사진측량 알고리즘과 유사한 성능을 나타내는 것을 알 수 있었다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권1호
• /
• pp.37-49
• /
• 2004

Four different data reduction methods for the heat transfer coefficients from experimental data under dehumidifying conditions are compared. The four methods consist of two heat and mass transfer models and two fin efficiency models. Data are obtained from two heat exchanger samples having plain fins or wave fins. Comparison of the reduced heat transfer coefficients revealed that the single potential heat and mass transfer model yielded the humidity-independent heat transfer coefficients. Two fin efficiency models-enthalpy model and humidity model-yielded approximately the same fin efficiencies, and accordingly approximately the same heat transfer coefficients. The heat transfer coefficients under wet conditions were approximately the same as those of the dry conditions for the plain fin configuration. For the wave fin configuration, however, wet surface heat transfer coefficients were approximately 12% higher. The pressure drops of the wet surface were 10% to 45% larger than those of the dry surface.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2738-2742
• /
• 2014

Geometry relaxation effects on the formation of benzene excimer were investigated by means of ab initio calculation at SOS-CIS($D_0$)/aug-cc-pVDZ level. In the case of T-shaped dimer configuration, intermolecular interactions in the excited states are found to be nearly the same as those in the ground state and structural deformations are limited within a single molecule; the geometry relaxation effects are then negligible and singlet-triplet energy gap remains constant. As for face-to-face eclipsed dimer, on the other hand, both molecules undergo structural change. As a result, intermolecular interactions in the excited states are significantly different than those in the ground state. Although the intermolecular distances obtained from potential energy curve calculation with frozen molecular structures are in qualitative agreement, the excited-state binding energies are notably overestimated with respect to those at optimized structures. In particular, the effects are calculated to be larger in $T_1$ state and hence singlet-triplet energy gap, which reduces markedly in this configuration, is underestimated without relaxation.

• 한국디지털건축인테리어학회논문집
• /
• 제13권3호
• /
• pp.41-49
• /
• 2013

According to the ROK 2010 census, representatives living arrangement are changing from 4 people per household to 2 people. Increasing number of elderly household and single household, the variety of lifestyles there has been a type of family structure. In this study, 1) through a precedent study review and case analysis to deduct representative group of lifestyle of Korean household. 2) Proposing spatial configuration according to the preferred lifestyle. 3) Deducting residential U-services from which specified from "Ubiquitous City Construction Project Operation Guide (2009)" of the korean Ministry of Land, Transport and Maritime Affairs. 4) Deduct highly expected U-service by each of lifestyle. As a result, spatial configuration and U-Services are proposed by changes of lifestyle which is based on ROK 2010 census.

• Journal of information and communication convergence engineering
• /
• 제6권4호
• /
• pp.376-382
• /
• 2008

Developing highly cost-efficient and reliable embedded systems demands hardware/software co-design and co-simulation due to fast TTM and verification issues. So, it is essential that Platform-Based SoC design methodology be used for enhanced reusability. This paper addresses a reusable SoC platform based on OpenCores soft processor with reconfigurable architectures for hardware/software codesign methodology. The platform includes a OpenRISC microprocessor, some basic peripherals and WISHBONE bus and it uses the set of development environment including compiler, assembler, and debugger. The platform is very flexible due to easy configuration through a system configuration file and is reliable because all designed SoC and IPs are verified in the various test environments. Also the platform is prototyped using the Xilinx Spartan3 FPGA development board and is implemented to a single chip using the Magnachip cell library based on $0.18{\mu}m$ 1-poly 6-metal technology.