• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.418-421
• /
• 2001

The ceramic filters were developed using technology similar to that of quartz crystal and electro- mechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emphasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creak coupled symmetric and anti- symmetric vibration modes. Accordingly, the simulation for ceramic (inter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2383-2385
• /
• 2005

In this paper we discuss the design and fabrication of two millimeter wave filters, in bandpass and bandstop topologies for wireless communications applications. The filters are made using a high Q MMIC transmission line, which consists of a 100 micrometers tall, surface micromachined, air filled inverted microstrip structure on a quartz substrate, made by using a JSR THB-151N negative photoresist sacrificial layer mold and electroplating technology. The filter topologies include a new, very compact, four pole, cross-coupled filter, that presents a single transmission zero at the lower side of the passband, which provides a very sharp out of passband rejection at this region.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.157-159
• /
• 1996

The secondary arcing phenomenon can be hardly modeled for computer simulation due to its particularly nonlinear characteristics. This paper describes a new computer modeling technique for the secondary arc which can be implemented with the EMTDC. The computer model proposed is based on realistic are conduction behaviors through both FIT and variable resistor modules which is supported in the EMTDC. Simulation results using the proposed technique are compared with some previous studies.

• 조명전기설비학회논문지
• /
• 제15권3호
• /
• pp.83-90
• /
• 2001

본 논문은 전력계통에 저주파수 동요현상을 제거하기 위한 목적으로 쓰이고 있는 전력계통 안정화 장치의 적정 파라메타 선정에 관한 알고리즘을 다루었다. 실측에 의한 발전기 시스템의 모델로부터 시스템 제 정수를 구하고, 극좌표 이동법으로 적절한 전력계통 안정화 장치의 파라메타를 Matlab으로 작성하여 구했다. 이 기법으로 선정된 전력계통 안정화 장치의 파라메타로 1기 무한대 계통에 적용한 시뮬레이션 결과는 만족한 만큼의 댐핑 효과를 보았다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.311-312
• /
• 2015

본 논문에서는 Unipolar PWM 스위칭 (Totem pole) 방법을 사용하는 단상인버터에서 나타나는 common mode noise를 저감시키는 스위칭 방법을 제안한다. 제안하는 방법은 출력전압의 중성점(N)을 입력전압 양단에 항상 고정하도록 스위칭을 하여 Common Mode Noise를 저감했다. 이를 Matlab Simulink를 사용한 모의해석과 실험을 통하여 Noise의 원인과 효과를 입증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1059-1061
• /
• 2005

The bushing currently applied to pole-mounted type loadbreak switch has porcelain bushing which is connected with the mold cone. This type has potential problems of uncertainty of sealing of the interface part and gas leakage on the connected part between bushing and switch tank due to the weight of the porcelain. The Composite Bushing can solve these problems and also the secondary problem of the potential accident owing to the fragment of the porcelain bushing in breakage due to the outer impact.

• 소음진동
• /
• 제9권2호
• /
• pp.340-347
• /
• 1999

The acoustic performance of reactive type single expansion chamber can be calculated theoretically by plane wave theory. But higher order model should be considered to widen the frequency range. Mode matching method has been developed to consider higher order modes, but very complicated algebra should be used. Munjal suggested a numerical collocation method, which can overcome the shortcomings of mode matching method, using the compatibility conditions for acoustic pressure and particle velocity at the junctions of area discontinuities. But the restriction of Munjal's method is that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In this paper, the new method was suggested to overcome the shortcomings of Munjal's method. The predictions by this method was also compared with those by the finite element method and Munjal's method in order to demonstrate the accuracy of the modified method presented here.

• 소음진동
• /
• 제10권1호
• /
• pp.33-40
• /
• 2000

With the increased requirement for automobile noise, a design fo mufflers with higher performances becomes more important in recent days. For a design of some mufflers, it must satisfy both minimizing back pressure and maximizing sound attenuation in broad range of frequecny. Even for a simple Helmholtz resonator, an important element in a muffler, a resonator design with accurate resonant frequency is difficult if one want to consider standing waves within the cavity. In this paper, the genetic algorithm, one of the optimization technique with high capability of global fittest solution and robust convergence, is applied to the design process of mufflers. Results show that the genetic algorithm can be successfully and efficiently used to find the fittest model for both mufflers and Helmoltz resonators.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.25-26
• /
• 2016

본 논문에서는 전기자동차용 충전기를 위한 전해커패시터가 없는 단일단 인터리브드 토템폴 소프트스위칭 AC-DC 컨버터를 제안한다. 제안하는 단일단 충전기는 토템폴 구조에 인터리빙 회로를 적용하여 소자의 수를 최소화하였으며 넓은 전압 및 부하영역에서 스위치의 ZVS 턴 온 및 다이오드의 ZCS 턴 오프를 성취하여 고효율을 달성할 수 있다. 또한 CCM 동작으로 인해 입력필터가 작고 스위치의 도통손실을 감소시킬 수 있으며 전해커패시터를 제거하고 필름커패시터를 사용하여 높은 전력밀도와 내구성을 만족한다. 제안하는 전기자동차용 충전기의 동작원리를 제시하고 시작품을 통해 본 논문의 타당성을 검증하였다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1866-1878
• /
• 2018

This paper presents a neutral point deviation and ripple compensation control method for application to 3-level NPC converters. The neutral point deviation and its harmonic components are analyzed with a focus on the average current flowing through the neutral point of the dc-link. This paper also proposes a control scheme to compensate for the neutral point deviation and dominant harmonic components under generalized unbalanced grid operating conditions. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converters. Simulation and experimental results are presented to verify the validity of the proposed method.