• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.131-131
• /
• 2013

A single-layer graphene has been uniformly grown on a Cu surface at elevated temperatures by thermally processing a poly(methyl methacrylate) (PMMA) film in a rapid thermal annealing (RTA) system under vacuum. The detailed chemistry of the transition from solid-state carbon to graphene on the catalytic Cu surface was investigated by performing in-situ residual gas analysis while PMMA/Cu-foil samples being heated, in conjunction with interrupted growth studies to reconstruct ex-situ the heating process. The data clearly show that the formation of graphene occurs with hydrocarbon molecules vaporized from PMMA, such as methane and/or methyl radicals, as precursors rather than by the direct graphitization of solid-state carbon. We also found that the temperature for vaporizing hydrocarbon molecules from PMMA and the length of time the gaseous hydrocarbon atmosphere is maintained, which are dependent on both the heating temperature profile and the amount of a solid carbon feedstock are the dominant factors to determine the crystalline quality of the resulting graphene film. Under optimal growth conditions, the PMMA-derived graphene was found to have a carrier (hole) mobility as high as ~2,700 cm2V-1s-1 at room temperature, superior to common graphene converted from solid carbon.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.31-36
• /
• 2008

Purpose: To investigate optical shop startup awareness of ophthalmic optics students as a basic source for startup education. Methods: Total of 287 students from three ophthalmic optics college in kyung-gi region was surveyed and analyzed using SPSS analysis. Results: Optical shop startup business plan of ophthalmic optics students was very high (80.1%). For startup timing, over 6yrs of employe (37.0%) was most and there was significant difference according to age (p<.001) and optician family present (p<.05). For startup type, single startup type (37%) was most and there was significant difference according to grade (p<.01). For startup unit of space, 30 pyong (43.5%) was most, Seoul metropolitan area and kyung-gi region (54.4%) was most for startup region, and station area (40.8%) was most for startup location. The reason of non-startup was eye hospital and glass related company employe (35.7%) was most and optical shop employe (35.7%) was most for non-startup planner's way. Conclusions: Startup business plan was very high and need to have startup education for there startup provision.

• Journal of Preventive Medicine and Public Health
• /
• v.44 no.2
• /
• pp.65-73
• /
• 2011

Objects: In July 2 2010, a diarrhea outbreak occurred among the workers in a company in Gyeungju city, Korea. An epidemiological investigation was performed to clarify the cause and transmission route of the outbreak. Methods: We conducted a questionnaire survey among 193 persons, and we examined 21 rectal swabs and 6 environmental specimens. We also delegated the Daegu Bukgu public health center to examine 3 food service employees and 5 environmental specimens from the P buffet which served a buffet on June 30. The patient case was defined as a worker of L Corporation and who participated in the company meal service and who had diarrhea more than one time. We also collected the underground water filter of the company on July 23. Results: The attack rate of diarrhea among the employees was 20.3%. The epidemic curve showed that a single exposure peaked on July 1. The relative risk of attendance and non-attendance by date was highest for the lunch of June 30 (35.62; 95% CI, 2.25 to 574.79). There was no specific food that was statistically regarded as the source of the outbreak. $Bacillus$ $cereus$ was cultured from two of the rectal swabs, two of the preserved foods and the underground water filter. We thought the exposure date was lunch of June 30 according the latency period of $B.$ $cereus$. Conclusions: We concluded the route of transmission was infection of dishes, spoons and chopsticks in the lunch buffet of June 30 by the underground water. At the lunch buffet, 50 dishes, 40 spoons, and chopsticks were served as cleaned and wiped with a dishcloth. We thought the underground water contaminated the dishes, spoons, chopsticks and the dishcloth. Those contaminated materials became the cause of this outbreak.

• Journal of Life Science
• /
• v.26 no.7
• /
• pp.805-811
• /
• 2016

The present study was performed to evaluate the anti-oxidant and anti-proliferating activity of the water extract mixture of Cordyceps militaris (CM) and Allium tuberosum (AT). The water extract mixture rate of CM and AT was optimized by means of a sensory evaluation test. The optimized mixture rate were decided at 70% of CM, 30% of AT, and 10% of apple concentrate as an additive. The values of total acidity, pH, sugar contents, and turbidity of the water extract mixture were 0.1%, 4.28, 9.10 °Brix, and 1.48 respectively. The water extract mixture had effective DPPH radical scavenging activity, reducing power effect, and ABTS radical activity. DPPH radical activities of the water extract and the water extract mixture were 43.2% and 51.7% respectively; their reducing power (OD₇₀₀) was 1.14 and 1.43 respectively; and ABTS^.+ radical activities were 47.1% and 62.2% respectively. Also, the water extract mixture showed a higher anti-proliferating effect than the AT extract on human prostate cancer cells. These results provided experimental evidence that the water extract mixture of CM and AT is a better source of anti-oxidant and anti-cancer ingredients than a single extract of CM. In conclusion, the water extract mixture of CM and AT will be beneficial in development of a functional drink.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1336-1348
• /
• 2009

In this paper, we propose an energy-aware multi-tree video multicast scheme for wireless ad hoc networks. Some network nodes may have energy enough to receive and forward the whole video content whereas some may not. Even though the video quality may vary depending on the remaining energy, our scheme enables the low-energy nodes to join the video multicast session. The video stream is split into a set of multiple and independent descriptions by MDC (Multiple description coding) scheme. Each description corresponds to a substream and number of substreams determine the video quality. The member nodes determine how many substreams it would receive depending on the remaining energy and expected amount of packets per substream. So does the intermediate tree nodes. That builds a tree per substream and multiple trees per session. The data source disseminates each substream through corresponding tree. The video quality of the member nodes varies according to number of participating trees. We evaluate the performance of our scheme by simulation. Our scheme showed better peak signal to noise ratio and extended the lifetime of the network nodes compared with MAODV, which builds a single tree, and MT-MAODV, which builds multiple trees but does not consider the available energy.

• Journal of Radiation Industry
• /
• v.6 no.1
• /
• pp.31-40
• /
• 2012

There are two methods to fabricate the readout electronic to a large-area CMOS image sensor (LACIS). One is to design and manufacture the sensor part and signal processing electronics in a single chip and the other is to integrate both parts with bump bonding or wire bonding after manufacturing both parts separately. The latter method has an advantage of the high yield because the optimized and specialized fabrication process can be chosen in designing and manufacturing each part. In this paper, LACIS chip, that is optimized design for the latter method of fabrication, is presented. The LACIS chip consists of a 3-TR pixel photodiode array, row driver (or called as a gate driver) circuit, and bonding pads to the external readout ICs. Among 4 types of the photodiode structure available in a standard CMOS process, $N_{photo}/P_{epi}$ type photodiode showed the highest quantum efficiency in the simulation study, though it requires one additional mask to control the doping concentration of $N_{photo}$ layer. The optimized channel widths and lengths of 3 pixel transistors are also determined by simulation. The select transistor is not significantly affected by channel length and width. But source follower transistor is strongly influenced by length and width. In row driver, to reduce signal time delay by high capacitance at output node, three stage inverter drivers are used. And channel width of the inverter driver increases gradually in each step. The sensor has very long metal wire that is about 170 mm. The repeater consisted of inverters is applied proper amount of pixel rows. It can help to reduce the long metal-line delay.

• Korean Journal of Optics and Photonics
• /
• v.17 no.5
• /
• pp.469-474
• /
• 2006

A $1{\times}16$ thermo-optic switch with small excess loss using multimode interference(MMI) couplers is designed, fabricated, and measured. This paper introduces the proposed $1{\times}16$ thermo-optic switch, and discusses the measurement results. The $1{\times}16$ thermo-optic switch is farmed as 4-stage which consists of 15 unit devices. The unit devices are the $2{\times}2$ thermo-optic switches with Mach-Zehnder interferometer(MZI) structure. The characteristics of the $1{\times}16$ thermo-optic switch depends strongly on each unit device. The unit deviceconsists of two 3-dB general interference MMI couplers and two single mode waveguide arms as a phase shifter. First of all, the 3-dB optical splitter and $2{\times}2$ MZI thermo-optic switch have been tested to confirm the characteristics of the unit devices of the $1{\times}16$ MZI thermo-optic switch. Using the measurement results of the unit devices, the $1{\times}16$ MZI thermo-optic switch can be produced with better characteristics. The resultant structure of the MMI coupler with the optical light source of wavelength of 1550nm for the $1{\times}16$ thermo-optic switch is that the width and the optimized length are $25{\mu}m\;and\;1580{\mu}m$, respectively. The smallest excess loss fur the unit device is -0.5dB and the average excess loss is -0.7dB.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.241-255
• /
• 2021

The human auricle is the first part to receive sound from the outside. In this part, the frequency range of human recognizable form is divided and organized. In this study, we propose modeling by applying a single sound source to the surface of the human auricle. This means that when the sound pressure of a low frequency (low frequency) sound enters the pinna, the impedance felt at the tip of a part of the non-linear surface of the pinna is mainly due to the tensile force at the end of the part of the non-linear surface of the pinna. By expressing the situation of moving at a very small speed, the characteristic impedance of the pinna was confirmed to be negative infinity, and it was also confirmed that the speed at the tip of a part of the non-linear surface of the pinna was 0 in the anti-resonance state. It was found that the wave propagation phenomenon that determines the characteristics of the filter is determined by how large the wavelength, kL, is compared to the length of the tip of a part of the non-straight surface of the pinna. Humans first receive sounds from outside through their ears. The auricle is non-linear and has a curved shape, and it is known that it analyzes frequencies while receiving external sounds. The human ear has an audible frequency range of 20Hz - 20,000Hz. Through the study, we applied the characteristics of the notch filter to hypothesize that the human audible frequency range is separated from the auricle, and applied filter theory to analyze it, and as a result, meaningful results were obtained. The curved part and the inner part of the auricle function as a trumpet, collecting sounds, and at the same time amplifying the weak sound of a specific band. The point was found and the shape of the envelope detected in the auricle was found. Selectivity for selecting sounds coming from the outside is the formula of the pinna that implements the function of Q. The function of distinguishing human-recognizable sound from the pinna from low to high through frequency analysis is performed in the pinna, and the 2-3kHz area, where human hearing threshold is the most sensitive, is also the acoustic impedance of the most recessed area of the pinna. It can be seen that starting from.

• Korean Journal of Breeding Science
• /
• v.41 no.2
• /
• pp.154-157
• /
• 2009

Pear has a gametophytic self-incompatibility (SI) system and its SI reaction is controlled by a single multi-allelic S-locus. 'Wonkyo Na-jasoojung 2' was selected from a cross between 'Wonwhang', early season major pear cultivar with high fruit quality and self-incompatible, and 92-18-79 (${S_4}^{sm}{S_4}^{sm}$) obtained from self cross of 'Osa-nijisseiki' (${S_2S_4}^{sm}$) (SM, stylar-part mutant), self-compatible bud mutant that originated from self-incompatible 'Nijisseiki' ($S_2S_4$) made in 2001 at the National Institute of Horticultural and Herbal Science, Rural Development Administration in Korea. '92-18-79' was selected as a self-compatible source through field investigation. It bloomed 1 day earlier than 'Osa-Nijisseiki' and similar to 'Wonwhang' in 2008. It is medium in tree vigor and spreading in tree habit. 'Wonkyo Na-jasoojung 2' is classified as highly susceptible to pear scab (Venturia nashicola) similar to 'Osa-Nijisseiki' and as resistant to black spot (Alternaria kikuchiana) similar to 'Wonwhang'. It had 65.7% fruiting rate by self pollination. The average optimum harvest time of 'Wonkyo Na-jasoojung 2' was 148 days after full bloom and it matured 2 days earlier than 'Osa-Nijisseiki' and 11 days later than 'Wonwhang'. The fruit is roundish oblate in shape and yellowish brown in skin color. Average fruit weight was 445 g and soluble solids content was 13.3 $^{\circ}Brix$. The flesh had abundant juice and negligible grit.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.103-113
• /
• 2019

License plate recognition camera is dedicated device designed for acquiring images of the target vehicle for recognizing letters and numbers in a license plate. Mostly, it is used as a part of the system combined with server and image analysis module rather than as a single use. However, building a system for vehicle license plate recognition is costly because it is required to construct a facility with a server providing the management and analysis of the captured images and an image analysis module providing the extraction of numbers and characters and recognition of the vehicle's plate. In this study, we would like to develop an embedded type convergent camera (Edge Base) which can expand the function of the camera to not only the license plate recognition but also the security CCTV function together and to perform two functions within the camera. This embedded type convergence camera equipped with a high resolution 4K IP camera for clear image acquisition and fast data transmission extracted license plate area by applying YOLO, a deep learning software for multi object recognition based on open source neural network algorithm and detected number and characters of the plate and verified the detection accuracy and recognition accuracy and confirmed that this camera can perform CCTV security function and vehicle number plate recognition function successfully.