• 제목/요약/키워드: Single relaxation time

검색결과 87건 처리시간 0.024초

정규압밀 점토 지반에서 매입말뚝의 수평거동에 관한 모형 실험 연구 (Model Testing on the Behavior of Laterally Loaded Pile in NC Clay Soils)

  • 김병탁;이상웅;김영수
    • 한국지반공학회지:지반
    • /
    • 제14권5호
    • /
    • pp.39-52
    • /
    • 1998
  • 본 논문은 정규압밀된 점성토 지반에서 강관 매입 말뚝의 수평 거동에 영향을 미치는 여러인자들 중에서 말뚝의 근입길이, 지반조건(건조단위 중량 $\gamma_4$), 말뚝 두부의 구속조건의 영향에 관하여 모형실험을 수행하였으며, 이러한 영향을 정량화 할 수 있는 경첩식을 그 결과들로부터 얻었다. 모형실험에 사용한 지반은 3종류의 정규압밀 점토이다. 2종류의 말뚝 근입길이와 말뚝 두부의 고정 자유조건의 모형실험결과들에 의하여 수평하중-변위 관계는 $\gamma_d/\gamma_{dmax}$=0.84 이하에서 완전 탄소성체의 거동형상을 보일 것으로 나타났으며, 각 실험에서 최대 수평하중(Q--) 이후의 수평하중 감소는 상당한 시간 의존성을 보였다. 본 연구에서는 수평 하중-변위관계(logo-logy/D)와 최대 휨 모멘트-변위관계($loaM_{max}$.-.-logy/D)에서 각각 구한 항복 수평하중(Qy)과 항복 최대 휭 모멘트(My)가 직선적인 관계로 밝혀졌다. Relaxation에 의한 수평하 중은 모형실험 결과들로부터 시간을 변수로 한 지수 함수식으로 회귀분석 하였다. 수평 극한하중과 항복하중에 대한 지반조건의 영향은 $\gamma_4$$/\gamma_{dmax}$의 변수로 한 지수함수식으로 모델화 하였으며, Broms와 Budhu et at.에 의한 결과와의 비교에서 예측결과가 26-78%정도 과대평가 되었다. 수평하중-변위 관계에 대한 말뚝 두부의 고정조건 영향에서 $Q_{mxed}/Q_{free}$-y/D의 관계는 상당히 비선형적으로 나타났으며, yiD를 변수로 한 지수함수식으로 모델화하였다.

  • PDF

한려해상국립공원 탐방객의 여행경로에 따른 탐방특성 및 만족도 분석 (Analysis on Visiting Characteristics and Satisfaction according to Travel Routes of the Hallyeohaesang National Park's Visitors)

  • 심규원;장진
    • 한국산림휴양학회지
    • /
    • 제22권4호
    • /
    • pp.23-33
    • /
    • 2018
  • 본 연구는 한려해상국립공원 탐방객을 대상으로 여행경로에 따른 탐방특성 및 만족도 분석을 통해 국립공원 탐방관리정책 수립을 위한 기초자료를 마련하고자 진행되었다. 연구대상은 한려해상국립공원을 방문한 탐방객 총 671명이고, 현장조사 기간은 2017년 3월부터 11월까지 계절별로 봄, 여름, 가을 3차례 설문조사를 진행하였다. 주요내용은 탐방특성(방문동기, 여행경로, 탐방 소요시간, 참여활동 등)과 만족도(탐방 만족도, 재방문의향, 추천의향) 등이며, 한려해상국립공원 탐방객을 대상으로 자기기입식 설문지를 사용하여 조사하였다. 자료의 분석은 SPSS 21.0 프로그램을 이용하여 빈도분석, 독립표본 t-test 분석을 실시하였다. 분석결과 한려해상국립공원만 방문하는 단일목적지의 탐방객이 한려해상국립공원 이외에 다른 여행 목적지가 있는 다목적지의 탐방객보다 방문동기 중 건강증진, 휴양 휴식 치유를 위한 동기 항목에서 평균값이 통계적으로 유의하게 높게 나타났다. 거주지에서 국립공원까지 오는데 소요된 시간은 단일목적지 방문객이 다목적지 방문객 보다 소요시간이 적게 나타났다. 한려해상국립공원만을 방문한 단일목적지 탐방객의 탐방 후 만족도 평균값은 다목적지의 탐방객보다 통계적으로 더 높게 나타났으며, 재방문의향 및 추천 의향도 더 높은 것으로 나타났다. 본 연구결과는 한려해상국립공원 탐방객의 특성을 파악하여 효율적인 공원관리 정책을 마련하기 위한 기초자료를 제시하였다는 측면에서 연구의 의의가 있다.

3T 자기공명영상 Fast Spin Echo (FSE)와 Ultra Short Time Echo (UTE) 펄스 시퀀스에서 가돌리늄 조영제 희석농도와 신호강도 비교 -팬텀 연구 (A Comparison Study of Signal Intensity of Gadolinium Contrast Media on Fast Spin echo and Ultra Short Time Echo Pulse Sequence at 3T MRI-Phantom Study)

  • 이석준;유승만
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권3호
    • /
    • pp.253-259
    • /
    • 2015
  • 본 연구에서는 가돌리늄 조영제를 다양한 몰농도로 희석하여 T1 효과를 나타내는 펄스 시퀀스 중 고속스핀에코와 에코타임이 극도로 짧은 ultra short time echo에서 최대 신호 강도 분포를 나타내는 조영제 희석 몰농도를 3.0T에서 각각 알아보고자 하였다. T1 조영제인 gadoxetic acid 와 완충용액으로는 증류수, 2% agarose gel을 이용하여 다양한 몰농도로 조영제 팬텀을 제작하였다. 팬텀 제작의 정확성을 측정하기 위해 T1 이완시간 측정의 표준방식인 2D inversion recovery spine-echo 펄스시퀀스를 이용하였으며 팬텀의 중간 부의 한 개의 관상면 영상을 획득하여 T1 이완 시간을 계산하였다. 스핀에코에서는 1-2 mmol/L 조영제 몰농도에서 가장 높은 신호를 나타냈으며, ultra short time echo에서는 7 mmol/L에서 가장 큰 신호를 나타냈다. ultra short time echo 펄스 시퀀스를 이용한 조영증강 효과를 보기 위해서는 고속스핀에코 기법 보다 2-3배의 조영제 농도가 목적 장기에 유지하여야 하며 이와 관련된 조영제량 및 투여 방법의 연구가 이루어져야 한다.

$Pb(Fe _{1/2}Ta_{1/2})O_3$의 합성, 유전특성 및 질서배열구조 (Syntheses, Dielectric Properties and Ordering Structures of $Pb(Fe _{1/2}Ta_{1/2})O_3$)

  • 우병철;김병국;김병호
    • 한국결정학회지
    • /
    • 제13권3_4호
    • /
    • pp.165-171
    • /
    • 2002
  • 고상반응법에 의해 합성된 분말을 $1100^{\circ}C$에서 소결함으로써 밀도가 $9.3g/cm^3$이고 평균입경이 $5.1{\pm}1.2{\mu}$$Pb(Fe_{1/2}Ta_{1/2})O_3$를 단일상으로 합성하였다. (공간군: Pm3m) $-150{\sim}50^{\circ}C$에서 측정된 비유전율은 인가전압의 주파수가 1kHz일 때 $-41^{\circ}C$에서 비유전율이 3100으로 최대값을 가지고 유전완화(dielectric relaxation)현상 및 완만한 상전이(diffuse phase transition, DPT)가 뚜렷하게 관찰되는 전형적인 완화형 강유전특성을 보였으며 소결후 $1000^{\circ}C$에서의 열처리 시간이 증가함 에 따라 상전이의 완만화도는 감소하여 정상 강유전체화 하였다. 한편, 소결직후 $Fe^{3+}$$Ta^{5+}$ 이온은 투과전자현미경으로도 검출할 수 없는 정도의 단거리 영역에서 화학양론적으로 1 : 1 질서 배열하고 있으며 이러한 B자리 양이온의 질서배열은 열처리 시간이 증가함에 따라 강화됨을 라만분광법으로 확인하였다. 소결직후 $Pb(Fe^{12}Ta_{1/2})O_3$센서의 완화형 강유전특성은 B자리 양이온의 화학양론적 1:1 단거리 질서배열구조와, 열처리한 $Pb(Fe_{1/2}TA_{1/2})O_3$에서의 완화형 강유전특성 감소는 열처리에 따라 강화된 화학양론적 1:1 단거리 질서배열구조와 연관지을 수 있었다.

Lattice Boltzmann Method를 이용한 2차원 자유수면 시뮬레이션 기법연구 (Feasibility Study on the Two-dimensional Free Surface Simulation Using the Lattice-Boltzmann Method)

  • 정노택
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권4호
    • /
    • pp.273-280
    • /
    • 2012
  • 전산유체역학의 격자볼츠만법은 Navier-Stokes방정식의 시뮬레이션 기법 보다 비교적 간략한 이산화 방식으로 인하여 공학적 응용성을 더욱 넓혀 가고 있다. 본 논문에서는 단일 완화계수 및 D2Q9 방식으로 중력장하에서 액체영역에서의 다이나믹스만 계산하는 자유수면 시뮬레이션을 수행하였으며, 그 활용성을 검증하였다. 자유표면의 재구성방법, 분포함수의 조합으로 이루어진 경계조건, 표면장력, 중력장의 안정화, 격자의존성, 자유수면 끝단의 하단 벽면 이동 검증등을 수행하였으며, 그 결과치가 실험치의 데이터와 일치함을 보였다.

유전함수를 이용한 ZnO-Bi2O3-Mn3O4 바리스터의 a.c. 특성 분석 (Analysis of a.c. Characteristics in ZnO-Bi2O3-Mn3O4 Varistor Using Dielectric Functions)

  • 홍연우;신효순;여동훈;김진호
    • 한국전기전자재료학회논문지
    • /
    • 제23권12호
    • /
    • pp.936-941
    • /
    • 2010
  • In this study, we have investigated the effects of Mn dopant on the bulk trap levels and grain boundary characteristics of $Bi_2O_3$-based ZnO (ZB) varistor using admittance spectroscopy and dielectric functions (such as $Z^*,\;Y^*,\;M^*,\;\varepsilon^*$, and $tan\delta$). Admittance spectra and dielectric functions show two bulk traps of $Zn_i^{..}$ (0.20 eV) and $V^{\bullet}_o$ (0.29~0.33 eV) in ZnO-$Bi_2O_3-Mn_3O_4$ (ZBM). The barrier of grain boundaries in ZBM could be electrochemically single type. However, its thermal stability was slightly disturbed by ambient oxygen because the apparent activation energy of grain boundaries was changed from 0.79 eV at lower temperature to 1.08 eV at higher temperature. The grain boundary capacitance $C_{gb}$ was decreased slightly with temperature as 1.3~1.8 nF but resistance $R_{gb}$ decreased exponentially. The relaxation time distribution can result from the heterogeneity of the barriers constituting the varistor. It is revealed that Mn dopant in ZB reduced the heterogeneity of the barrier in grain boundaries and stabilized the barrier against the ambient temperature.

공급사슬상의 분산 제조 시스템의 통합생산계획에 관한 연구 (A Study on Integrated Production Planning of Distributed Manufacturing Systems on Supply Chain)

  • 고도성;양영철;장양자;박진우
    • 산업공학
    • /
    • 제13권3호
    • /
    • pp.378-387
    • /
    • 2000
  • As the globalization of manufacturing companies continues, the scope of dependence between these companies and distributors, and other suppliers are growing very rapidly since no one company manufactures or distributes the whole product by themselves. And, the need to increase the efficiency of the whole supply chain is increasing. This paper deals with a multi-plant lot-sizing problem(MPLSP) which happens in a decentralized manufacturing system of a supply chain. In this study, we assume that the whole supply chain is driven by a single source of independent demand and many levels of dependent demands among manufacturing systems in the supply chain. We consider setup cost, transportation cost and time, and inventory holding cost as a decision factor in the MPLSP. The MPLSP is decomposed into two sub-problems: a planning problem of the whole supply chain and a lot-sizing problem of each manufacturing system. The supply chain planning problem becomes a pure linear programming problem and a Generalized Goal Decomposition method is used to solve the problem. Its result is used as a goal of the lot-sizing problem. The lot-sizing problem is solved using the CPLEX package, and then the coefficients of the planning problem are updated reflecting the lot-sizing solution. This procedure is repeated until termination criteria are met. The whole solution process is similar to Lagrangian relaxation method in the sense that the solutions are approaching the optimum in a recursive manner. Through experiments, the proposed closed-loop hierarchical planning and traditional hierarchical planning are compared to optimal solution, and it is shown that the proposed method is a very viable alternative for solving production planning problems of decentralized manufacturing systems and in other areas.

  • PDF

[ $^1H$ ] Nuclear Magnetic Resonance Study of Ferroelectric $(NH_4)_3H(SO_4)_2$

  • Choi, S.H.;Han, K.S.;Kwon, S.K.;Nam, S.K.;Choi, H.H.;Lee, Moo-Hee;Lim, Ae-Ran
    • 한국자기공명학회논문지
    • /
    • 제11권2호
    • /
    • pp.64-72
    • /
    • 2007
  • [ $^1H$ ] nuclear magnetic resonance (NMR) experiments have been performed at 30 - 300 K and 7 T to investigate dynamics of hydrogen bond network in the single crystal $(NH_4)_3H(SO_4)_2$. The two proton sites, ammonium proton and hydrogen-bond proton, are identified from the $^1H$ NMR MAS spectrum at 340 K. As temperature decreases, the $^1H$ NMR spectrum shifts to the higher frequency side with a larger linewidth. The spectrum at 65 K shows a distinctive change in line shape toward the ferroelectric transition at 63 K. The measured values of $T_1$ for ammonium and hydrogen-bond protons are similar in the whole range of temperature. $T_1$ of $^1H$ NMR shows a gradual decrease down to 120 K and starts to steeply increase below 100 K. Then $T_1$ shows abrupt decrease below 70 K with a sharp minimum at 63 K, where the ferroelectric transition occurs. This temperature dependence of spectrum and $T_1$ clearly prove that the large change in the dynamics of hydrogen bond network is associated with the ferroelectric phase transition at 63 K.

  • PDF

Chiller용 냉매 CFC-11과 대체냉매 HCFC-123의 전기장을 사용한 핵비등 열전달 촉진에 관한 연구 (An Experimental Study of Nucleate Boiling Heat Transfer With EHD Technique in CFC-11 and HCFC-123)

  • 곽태희;김주형;정동수;김종보;차태우;한창섭
    • 설비공학논문집
    • /
    • 제6권4호
    • /
    • pp.365-379
    • /
    • 1994
  • Pool boiling experiments were carried out to study the effect of electric field on nucleate boiling heat transfer. CFC-11 and its alternative HCFC-123 were used as working fluids. Boiling on both single tube and a bundle of five tubes was investigated. Heat flux varied from 5 to $25kW/m^2$ while the applied voltage changed from 0 to 1kV. The results showed that at low heat flux where boiling was not present or very weak, electric field-induced forced convection helped increase the heat transfer coefficients of CFC-11 and HCFC-123 significantly(4-15 times increase). However, at higher heat flux, nucleate boiling of CFC-11 which is a highly dielectric fluid, was not affected significantly by the application of electric field. In contrast to CFC-11, even at high heat flux, nucleate boiling of CFC-11 which has a relatively larger electric conductivity than CFC-11, was vigorously increased up to 2-4 times. The additional power required to apply the electric field was 1-2% of the total power consumption by the heater. The increase in overall heat transfer coefficient of evaporators with HCFC -123 was about 40%, suggesting a considerable reduction in evaporator size with EHD technique.

  • PDF

Rheological Measurement of Fiber Spinnability of PVA Solution Dopes in DMSO

  • Chae, Dong-Wook
    • 한국염색가공학회지
    • /
    • 제22권3호
    • /
    • pp.187-193
    • /
    • 2010
  • The effects of molecular weight (MW) and concentration on the rheological properties of poly(vinyl alcohol) (PVA) solutions in dimethyl sulfoxide (DMSO) were investigated at $30^{\circ}C$. Ubbelohde viscometer and rotational rheometer were employed for dilute and concentrated regime, respectively. In the dilute regime, the Mark-Houwink exponent ($\alpha$) of the solutions determined from three different MWs proved 0.73. The critical concentration (C*), in which the entanglement and overlap of polymer molecules began to take place, decreased with increasing the MW of PVA. Huggins constant ($K_H$) values ranged from 0.33 to 0.45 over the MW examined. In the log-log plot of $\eta_{sp}$ versus [$\eta$]C, the PVA with higher degree of polymerization (DP) gave a greater slope exhibiting the inflection point in the vicinity of C*. In the dynamic viscosity ($\eta'$) curve, the PVA solutions of DP 1700 presented Newtonian fluid behavior over most of the frequency range examined. However, the lower Newtonian flow region reduced with increasing the DP. As the PVA concentration increased, $\eta'$ was increased and the onset shear rate for pseudoplasticity was decreased. In the Cole-Cole plot, PVA solutions showed almost a single master curve in a slope of ca. 1.65 regardless of the DP. However, the increase of the concentration from 8 to 12 wt% for PVA solutions of DP 5000 decreased the slope from 1.73 to 1.57. In the tan $\delta$ curve, the onset frequency for sol-gel transition was shifted from 154 to 92 rad/s with increasing the DP from 3300 to 5000 and from 192 to 46 rad/s with increasing the concentration from 8 to 12 wt%. In addition, longer relaxation time ($\lambda$) was observed with increasing the DP and concentration.