• 제목/요약/키워드: Single number quantity

검색결과 64건 처리시간 0.022초

단일모드 스펙트럼해석법에 의한 교량의 효율적 내진해석 (Efficient Seismic Analysis of Bridge by Single Mode Spectrum Analysis Method)

  • 박윤봉;국무성;유승운;김선훈
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2003년도 가을 학술발표회 논문집
    • /
    • pp.487-494
    • /
    • 2003
  • Recently it is used seismic analysis like single mode spectrum analysis, multi mode spectrum analysis and time history analysis in Korea. Because bridges are not special form of them but regular and simple form of them in our country, we must develope seismic analysis program of bridge based on single nude spectrum analysis. The program developed by this study reduces a Quantity and a time of calculation compared to SAP90 and gives accurate answers without errors. In the case of commercial program if we look for seismic load(P/sub e/(x)), we must increase the number of node and the larger the number of node the more a quantity and a time of calculation. But this program is exactly solved with basic node compared to commercial program.

  • PDF

공동주택 세대간 차음성능에 관한 연구 (A study on the sound insulation performance of partition wall between units of apartment house)

  • 주문기;오양기
    • KIEAE Journal
    • /
    • 제10권3호
    • /
    • pp.51-56
    • /
    • 2010
  • The sound insulation performance is one of the important factor that determined the amenity of housing life in residential building. Especially, Apartment house represents a korea habitation. So the importance of privacy and noise problems between habitable rooms are emphasized in these habitation. This study investigates and find a problem of sound insulation performance of partition wall of the apartment house in current state. The measurements were carried out in apartment house with and without a stair hall. And the measurements also carried out in current state and installing a sound absorbing material in receiving room and changing a front door and installing a inner door. In spite of the same partition wall, difference results were showed according to the stair hall. It is appeared that sound insulation performance without stair hall is 6-7dB(Dw) higher than that with stair hall. In case of without stair hall, sound insulation performance is Dw 49 for single number quantity for airbone sound. And In case of changing a front door and installing a inner door sound insulation performance is Dw 57 for single number quantity for airbone sound. The Results of measuring on the changes a front door and installed a inner door indicated that the flanking sound through front door influenced the sound insulation performance.

신선·시즌 상품의 최적 주문량 산정 문제에 대한 실증적 분석 : 소매유통업에서 뉴스벤더 모델의 적용 (An Empirical Analysis on Optimal Oder Quantity of Perishable and Seasonal Products : A Practical Application of Newsvendor Model in Retail)

  • 노건호;황승준
    • 산업경영시스템학회지
    • /
    • 제42권1호
    • /
    • pp.41-54
    • /
    • 2019
  • Although retailers deals with a large number of single-term inventory items, but few cases have been considered in the areas of practical decision making. However, recent moves to strengthen fair trade have created a real need for single-period inventory decision-making problems. This study addresses the problem of ordering quantity decisions that are expected to maximize profits using classical newsvendor models. The research target is data on seasonal and perishable products from retail. We also use data from retailers to actually apply the newsvendor model and calculate the results to compare performance. It also suggests solutions for estimating demand for products sold in order to apply newsvendor models that utilize actual demand ratio versus forecast demand. This study would like to examine the effectiveness of this research through data analysis and make some suggestions for applying it to reality.

Molecular Connectivity법에 의하여 발암성 Benzenoid 탄화수소의 (The Theoretical Studies for the)

  • 김의락;은종국;이명재;김상해
    • 대한화학회지
    • /
    • 제31권2호
    • /
    • pp.153-161
    • /
    • 1987
  • Benzenoid 탄화수소의 발암성은 분자의 위상학적 성질에 크게 의존하며, 특히 benzenoid탄화수소가 발암성을 가질려면 그 구조상에 "bay region"이라고 알려진 부분이 존재하여야 한다는 것이 널리 알려져 있다. 81가지 benzenoid 탄화수소에 대하여 발암성 "bay region"을 molecular connectivity index의 크기는 그들 화합물 중에 단일결합을 가지는 화합물을 제외하고는 아주 잘 일치함을 알 수 있었다.

  • PDF

상주 및 인근지역 단체급식소의 다량조리 실태 연구 -식단분석 및 다량조리 실태- (A Study on the Quantity Food Production Practices of Foodservice in Sangju and Near-by Region)

  • 박모라;김귀영;박필숙;강우원
    • 동아시아식생활학회지
    • /
    • 제8권1호
    • /
    • pp.36-50
    • /
    • 1998
  • The purpose of this study was to investigate quantity food production practices in foodservices by analysing the menus of April, 1996, The questionnaire was developed and responded to by 96 dietitians in Sangju, Munkyung, Gumee, Kimchun, and Andong during November, 1996. The survey was performed by simple random samplings. The results were as follosw; 1. Hospitals and industry served food for thirty days and schools for twenty days. Kimchi was a select-menu for hospitals and one side dish for industry and schools. The type of menu was a single use menu which consisted of cooked rice, soups and three side dishes. 2. The most frequently used ingredients were green onions, rice, carrots, onions, Korean radish roots, pork, eggs, glutinous rice, and milk. Kimchis were served most frequently in all food services and cooked rices and soups were next. 3. The age of most of the respondents was 26 to 30.54.2% of subjects were juniou college graduates and 77.1% were single. Fifty seven point three percent of the dietitians lived with family relatives, or friends. 87.5% of the dietitians had been working for 1 to 5 years. 4. Most foodservices were self-operated. The number of meals served was determined by meal coupon counting in hospitals(37.5%), meal board counting in industry(29.2%), and attendance card counting in schools(41.1%) The cost of sales per meal was approximately 2,450 won in hospitals and was approximately 1,100 won in industry and schools. The average number of days per menucycle was 7.4 in hospitals. 10.3 in industry and 25.5 in schools. Hospitals, industry, and schools held about 118, 265 and 263 recipes respectively. The average number of dietitians was 2.6 in hospitals and 1.0 in industry and schools. Except for the number of recipes, the general practices of foodservices were significantly different(P<0.05). 5. In the general quantity food production, food and seasonings measuring was hardly done. the percentage of foodservices using chemical seasonings was higher in hospitals and industry than in schools. the most important concern was taste, Registered cooks were employed in 75% of schools but only 50.0% in hospitals and 20.8% in industry. Most of the dietitians respinded that their cooks skill was not bad. The education of unregistered cooks was performen once or two times a month in hospitals and industry, and in schools performed everyday. The problem when educating cooks was the lack of cooking skill of the dietitians in schools, and the lack of time in hospitals, and the negative attitude toward education in industry. The method for improving cooking in all foodservices was OJT, or the extension of education facilities and the development and dissemination of standard recipes. The frequency of throwing away leftovers was higher in hospitals. But in industry, the frequency of saving leftovers was higher. 6. Though all foodservices have standard recipes, the number that used them was low, Another problem is that standard recipes resulted in leftovers. The inconveniences of using standard recipes were the difficulty of applying standard recipes to various numbers of customers the complication of use, or facility insufficiency.

  • PDF

다원자재를 고려한 구매업자와 공급업자간 공급사슬에서의 통합재고모형에 관한 연구 (An Integrated Inventory Model for a Vendor-Buyer Supply Chain in a JIT Purchasing)

  • 김대홍
    • 산업경영시스템학회지
    • /
    • 제32권3호
    • /
    • pp.159-167
    • /
    • 2009
  • In this paper, we consider a single-vendor single-buyer supply chain problem where a single vendor orders raw materials from its supplier, then using its manufacturing processes converts the raw materials to finished goods in order to deliver finished goods to a single buyer for effective implementation of Just-In-Time Purchasing. An integrated lot-splitting model of facilitating multiple shipments in small lots between buyer and supplier is developed in a JIT Purchasing environment. Also, an iterative heuristic solution procedure is developed to find the order quantity for finished goods and raw materials, and number of shipments between buyer and supplier. We show by numerical example that when the integrated policy is adopted by both vendor and buyer in a cooperative manner, both parties can benefit.

판매자-구매자 생산-재고통합 문제를 위한 Mixed Approach (A Mixed Approach for Single-Vendor-Single-Buyer Production Inventory Integration Problem)

  • 이동주
    • 산업경영시스템학회지
    • /
    • 제39권4호
    • /
    • pp.7-14
    • /
    • 2016
  • Unlike most researches that focus on single manufacturer or single buyer, this research studies the cooperation policy for two participants of supply chain such as single vendor and single buyer. Especially, this paper deals with single vendor-single buyer integrated-production inventory problem. If the buyer orders products, then the vendor will start to make products and then the products will be shipped from the vendor to the buyer many times. The buyer is supposed to order again when the buyer's inventory level hits reorder point during the last shipment and this cycle keeps repeated. The buyer uses continuous review inventory policy and customer's demand is assumed to be probabilistic. The contribution of this paper is to present a mixed approach and derive its cost function. The existing policy assumes that the size of shipping batch from single vendor to single buyer is increasing, called Type 1, or constant, called Type 2. In mixed approach, the size of shipping batch is increasing at the beginning part of the cycle, and then its size is constant at the ending part of the cycle. The number of shipping for Type 1 and Type 2 in a cycle in mixed approach is determined to minimize total cost. The relationship between parameters, for example, the holding cost per product, the set up cost per order, and the shortage cost per item and decision variables such as order quantity, safety factor, the number of shipments, and shipment increasing factor is figured out via sensitivity analysis. Finally, it is statistically proved that the mixed approach is superior to the existing approaches.

판매자와 구매자의 재고상한이 존재하는 VMI (VMI with Upper Limit of Inventory for Vendor and Retailer)

  • 이동주
    • 산업경영시스템학회지
    • /
    • 제40권4호
    • /
    • pp.105-111
    • /
    • 2017
  • Vendor Managed Inventory is a well-known vendor-retailer coordination approach in supply chain management where the vendor manages inventory of the retailer and determines the order interval and order quantity for the retailer. To consider practical situation, the upper limit of inventory for the retailer is set. If the inventory level for the retailer exceeds the upper limit, then the penalty cost is charged to the retailer. Furthermore, maximum allowable inventory level is set for the vendor to prevent the vendor from keeping much inventory. Single-vendor multi-retailer supply chain model with upper limit of inventory for vendor and retailers is studied. All the retailers' are assumed to have the common cycle time, and a vendor manages retailers' inventory and replenishes products. The mathematical formulation is introduced to minimize the total cost including the penalty cost violating the upper limit of inventory for retailers with the constraint of maximum allowable inventory level. The solution procedure based on Karush-Kuhn-Tucker (KKT) conditions is derived. KKT conditions are often applied to find an optimal solution of nonlinear programming problem with constraints. An illustrative example is used to show the application of the proposed solution procedure. Furthermore, sensitivity analysis is done to find out the relationship between maximum allowable inventory level and other values such as order quantity, the number of shipment, vendor's cost, retailer's cost, and total cost. As maximum allowable inventory level decreases, the number of shipment decreases but total cost increases. Order quantity has the trend of decline and is affected by the number of shipment.

JIT구매를 고려한 단일 제조업자-다소매업자의 공급사슬에서 통합재고모형 (Generalized Single Manufacturer and Multiple Retailers Supply Chain Model in JIT Purchasing)

  • 김대홍
    • 산업경영시스템학회지
    • /
    • 제34권4호
    • /
    • pp.25-34
    • /
    • 2011
  • In this paper, we investigate an inventory system where a single manufacturer purchases and processes raw materials in order to deliver finished goods to multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce finished goods, but we consider multi-raw materials in order to produce finished goods. Also, we develop an iterative solution procedure to find the order quantity for the finished goods and raw materials, and the number of shipments between manufacturer and retailers that minimizes the total cost per unit time of the raw materials ordering and holding, manufacture's setup and finished goods holding, the retailer's ordering and inventory holding. Numerical examples are presented to illustrate that jointly considering the total cost results in less total cost than that of considering them separately.

JIT구매 하에서의 단일제품의 통합재고모형에 관한 연구 (An Integrated Inventory Model for a Single Product and its Raw Materials in Just-In-Time Purchasing)

  • 김대홍
    • 산업경영시스템학회지
    • /
    • 제26권3호
    • /
    • pp.50-57
    • /
    • 2003
  • In this paper, we consider an integrated inventory system where a single supplier purchases and processes raw materials in order to deliver finished goods to a single buyer for effective implementation of Just-In-Time purchasing. An integrated JIT lot-splitting model of facilitating multiple shipments in small lots is developed in a JIT purchasing environment. Also, an iterative solution procedure is developed to find the order quantity for the finished goods and raw materials, and the number of shipments between buyer and supplier. We show by example that the integrated policy adopted by both buyer and supplier in a cooperative manner can provide them a greater economic benefit than seeking the local optimal inventory policy independently.