• Restorative Dentistry and Endodontics
• /
• 제42권3호
• /
• pp.200-205
• /
• 2017

Objectives: The aim of this in vivo study was to assess the accuracy of 2 third-generation electronic apex locators (EALs), Propex II (Dentsply Maillefer) and Root ZX II (J. Morita), and radiographic technique for locating the major foramen (MF). Materials and Methods: Thirty-two premolars with single canals that required extraction were included. Following anesthesia, access, and initial canal preparation with size 10 and 15 K-flex files and SX and S1 rotary ProTaper files, the canals were irrigated with 2.5% sodium hypochlorite. The length of the root canal was verified 3 times for each tooth using the 2 apex locators and once using the radiographic technique. Teeth were extracted and the actual WL was determined using size 15 K-files under a ${\times}25$ magnification. The Biostat 4.0 program (AnalystSoft Inc.) was used for comparing the direct measurements with those obtained using radiographic technique and the apex locators. Pearson's correlation analysis and analysis of variance (ANOVA) were used for statistical analyses. Results: The measurements obtained using the visual method exhibited the strongest correlation with Root ZX II (r = 0.94), followed by Propex II (r = 0.90) and Ingle's technique (r = 0.81; p < 0.001). Descriptive statistics using ANOVA (Tukey's post hoc test) revealed significant differences between the radiographic measurements and both EALs measurements (p < 0.05). Conclusions: Both EALs presented similar accuracy that was higher than that of the radiographic measurements obtained with Ingle's technique. Our results suggest that the use of these EALs for MF location is more accurate than the use of radiographic measurements.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.14-19
• /
• 2007

Angle sensors based on the principle of autocollimation, which are usually called autocollimators, can accurately measure small tilt angles of a light-reflecting flat surface. This paper describes a prototype micro-angle sensor that is based on the laser autocollimation technique. The new angle sensor is compact and consists of a laser diode as the light source and a quadrant photodiode as a position-sensing device. Because of its concise design, the microangle sensor facilitates dynamic measurements of the angular error motions of a precision stage without influencing the original dynamic properties of the stage. This is because the sensor only requires a small extra target mirror to be mounted on the stage. The sensitivity of the angle detection is independent of the focal length of the objective lens; therefore, an objective lens with a relatively short focal length is employed to reduce the size of the device. The micro-angle sensor uses a single lens for the both the laser collimation and focusing, which distinguishes it from the conventional laser autocollimation method that has separate collimate and objective lenses. The new micro-angle sensor has dimensions of $15.1\times22.0\times14.0mm$ and its resolution is better than 0.1 arc-second The optical design and performance of this micro-angle sensor were verified by experimental results.

• 대한족부족관절학회지
• /
• 제13권1호
• /
• pp.23-27
• /
• 2009

Purpose: The purpose of this study was to evaluate the clinical outcome of neglected Achilles tendon rupture treated with reconstruction and augmentation with flexor hallucis longus (FHL) tendon using one incision technique. Materials and Methods: Between July 2006 and March 2008, eleven patients with neglected Achilles tendon rupture received surgical treatment. Through one incision technique, augmentation with auto FHL tendon transfer was performed using a Bio-Interference screw (Arthrex, Naples, FL) and followed by V-Y advancement (5 cases) or gastronemius fascial turn-down flap procedure (6 cases). After mean follow up of 20.7 months (range, 11.8-33.3 weeks), clinical outcomes were evaluated with Visual Analogue Scale (VAS), American Orthopedic Foot and Ankle Society (AOFAS) score, 10 repetitive double heel raise test, 10 repetitive single heel raise test and subjective satisfaction. Results: The length of the gap after debridement was $5.4{\pm}2.0$ cm. The VAS improved from $4.1{\pm}0.9$ to $1.5{\pm}0.8$ at last follow up (p<0.05). The AOFAS score increased from $38.9{\pm}12.2$ to $91.5{\pm}8.9$ at last follow up (p<0.05). Eight patients were satisfied with excellent results and three were satisfied with good results. All patients were able to perform 10 repetitive double heel raise and nine out of eleven patients were able to perform 10 repetitive single heel raise at last follow up. There were no complications including deep infection or re-rupture. Conclusion: Augmentation with FHL tendon transfer and reconstruction with V-Y advancement or turn-down flap through one incision technique appeared to be effective and safe. This technique is recommendable for the treatment of neglected Achilles tendon rupture.

• Geomechanics and Engineering
• /
• 제23권1호
• /
• pp.15-30
• /
• 2020

The probabilistic bearing capacity of a strip footing placed on the edge of a purely cohesive reinforced soil slope is computed by combining lower bound finite element limit analysis technique with random field method and Monte Carlo simulation technique. To simulate actual field condition, anisotropic random field model of undrained soil shear strength is generated by using the Cholesky-Decomposition method. With the inclusion of a single layer of reinforcement, dimensionless bearing capacity factor, N always increases in both deterministic and probabilistic analysis. As the coefficient of variation of the undrained soil shear strength increases, the mean N value in both unreinforced and reinforced slopes reduces for particular values of correlation length in horizontal and vertical directions. For smaller correlation lengths, the mean N value of unreinforced and reinforced slopes is always lower than the deterministic solutions. However, with the increment in the correlation lengths, this difference reduces and at a higher correlation length, both the deterministic and probabilistic mean values become almost equal. Providing reinforcement under footing subjected to eccentric load is found to be an efficient solution. However, both the deterministic and probabilistic bearing capacity for unreinforced and reinforced slopes reduces with the consideration of loading eccentricity.

• 대한의생명과학회지
• /
• 제8권1호
• /
• pp.39-46
• /
• 2002

Amplified fragment length polymorphism (AFLP) is a recently developed PCR-based high resolution fingerprinting method that is able to generate complex banding patterns which can be used to delineate intraspecific genetic relationships among bacteria. In this study, we have modified and evaluated a PCR-based technique, amplified fragment length polymorphism (AFLP) analysis, for use in fingerprinting strains of Staphylococcus aureus. Single-enzyme amplified fragment length polymorphism (SE-AFLP) analysis was used to perform strain identification of Staphylococus aureus. By careful selection of AFLP primers, it was possible to obtain reproducible and sensitive identification to strain level. AFLP fingerprinting of 5 reference strains of Staphylococcus aureus and 65 strains of Staphylococcus aureus that were isolated from food sources of different area and diverse genomic types of Staphylococcus aureus were recognized. As a result of this study, we found that the AFLP patterns of Staphylococcus aureus isolated from Seoul, Taejeon and Gwang-Ju indicated the close relation with genetic similarity. The main purpose of this study was to find an alternative and reliable fingerprinting method to study the overall genetic diversity, using Staphylococcus aureus species as an example, and observed if the method can be successfully applied to all staphylococcal species.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.655-658
• /
• 2012

광섬유의 그룹 속도 분산 (GVD; group velocity dispersion)과 비선형 효과의 상호 작용에 의해 왜곡되는 960 Gbps 신호의 보상을 위해 분산 제어 (DM; dispersion management) 기술이 적용된 광전송 링크의 유연한 구성에 필요한 중계 구간 (fiber span)을 구성하는 단일 모드 광섬유 (SMF; single mode fiber)의 길이와 중계 구간 당 잉여 분산 (RDPS; residual dispersion per span)을 인위적으로 분포시킨 구조에서의 전체 잉여 분산 (NRD; net residual dispersion)의 최적치와 최상의 시스템 성능을 얻을 수 있는 분포 패턴을 도출하였다.

• Archives of Plastic Surgery
• /
• 제49권3호
• /
• pp.448-452
• /
• 2022

Total reconstruction of the penis (TPR) represents a challenge for urologists and plastic surgeons, especially when urethral length is severely reduced. We here describe, for the first time in an oncologic scenario, a double flap phalloplasty using a pedicled anterolateral thigh (ALT) flap for penile reconstruction and a radial forearm free flap (RFFF) for complete neourethra and glans reconstruction following penile amputation. A 48-year-old patient came to our department following a total penectomy with inferior urethral derivation. The indication for a double flap phalloplasty was posed as only way to fully reconstruct the urethra on its length avoiding possible complications of single flap reconstruction using tube-into-tube technique. Both flaps healed uneventfully with no neourethral strictures or fistulas described. At 18 months follow-up, the patient was extremely satisfied with the aesthetic result and was able to void in standing position. We think that a double free tissue transfer for TPR should be considered, particularly when a urethral length > 14 cm needs to be reconstructed. While the pedicled ALT can be used to reconstruct a proper penile shaft with an easily concealed scar, the RFFF can provide adequate neourethra length with satisfactory sensory recovery at the neoglans.

• Restorative Dentistry and Endodontics
• /
• 제38권3호
• /
• pp.167-171
• /
• 2013

Biomechanical preparation of root canals with accentuated curvature is challenging. New rotatory systems, such as Reciproc, require a shorter period of time to prepare curved canals, and became a viable alternative for endodontic treatment of teeth with root dilaceration. Thus, this study aimed to report a clinical case of endodontic therapy of root with accentuated dilaceration using Reciproc single-file system. Mandibular right second molar was diagnosed as asymptomatic irreversible pulpitis. Pulp chamber access was performed, and glide path was created with #10 K-file (Dentsply Maillefer) and PathFile #13, #16 and #19 (Dentsply Maillefer) up to the temporary working length. The working length measured corresponded to 20 mm in the mesio-buccal and mesio-lingual canals, and 22 mm in the distal canal. The R25 file (VDW GmbH) was used in all the canals for instrumentation and final preparation, followed by filling with Reciproc gutta-percha cones (VDW GmbH) and AH Plus sealer (Dentsply Maillefer), using thermal compaction technique. The case has been receiving follow-up for 6 mon and no painful symptomatology or periapical lesions have been found. Despite the difficulties, the treatment could be performed in a shorter period of time than the conventional methods.

• 제어로봇시스템학회논문지
• /
• 제3권6호
• /
• pp.602-612
• /
• 1997

With GPS carrier phase measurements from more than two antenna which attached to the vehicle, precise attitude can be easily obtained if the integer ambiguity included in carrier phase measurement is resolved. Recently some special products which use dual frequencies or has one receiver engine with multiple antenna are announced. But there are still strong requirements for the conventional single frequency off-the-shelf receiver. To meet these requirements, an efficient integer ambiguity resolution technique is indispensable. In this paper, a new technique to resolve integer imbiguity with single frequency receivers is proposed. The proposed method utilize the known baseline length as a constraint of independent elements of integer ambiguities. With this constraints, the size of search volume can be greatly reduced. Thus the true integer ambiguity can be easily determined with less computational burden and number of measurements. The proposed method is applied to real data to show its effectiveness.

• 한국의상디자인학회지
• /
• 제24권4호
• /
• pp.87-99
• /
• 2022

The purpose of this study is to develop machine embroidery textile designs for each technique that can be expressed using a single-headed computer embroidery sewing machine through a machine embroidery CAD system. For research, embroidery CAD utilized the Artistic digitizer, and the guillotine computer-mechanical magnetization machine used ELNA. The design concept was limited to portraits and relics of independence activists in six memorial halls built in Korea. The results of this study are as follows. First, it was found that the machine embroidery texture, which could only be produced by industries in the past, can be expand in the infinite creative embroidery design area by enabling the digitalization of motif images and the simulation of machine embroidery techniques through various layout options. Second, in the development of machine embroidery textures, it was found that the setting of the width, height, axis ratio, stitch, object, path, length, density, layer order, etc. in embroidery CAD is a very important part of determining the completeness of the embroidery results. Third, mechanical embroidery textile designs, which can be represented by single-head computer machine embroidery machine were able to show colorful embroidery results that differs from the original image by using seven main techniques and five deep technique alone or in combination, according to the designer's intention.