1 |
Noorzad, R. and Mirmoradi, S.H. (2010), "Laboratory evaluation of the behavior of a geotextile reinforced clay", Geotext. Geomembr., 28(4), 386-392. https://doi.org/10.1016/j.geotexmem.2009.12.002.
DOI
|
2 |
Phoon, K.K. and Kulhawy, F.H. (1999a), "Characterization of Geotechnical Variability", Can. Geotech. J., 36(4), 612-624. https://doi.org/10.1139/t99-038.
DOI
|
3 |
Phoon, K.K. and Kulhawy, F.H. (1999b), "Evaluation of geotechnical property variability", Can. Geotech. J., 36(4), 625-639. https://doi.org/10.1139/t99-039.
DOI
|
4 |
Pramanik, R., Baidya, D.K. and Dhang, N. (2019), "Implementation of fuzzy reliability analysis for elastic settlement of strip footing on sand considering spatial variability", Int. J. Geomech., 19(12), 04019126. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001514.
DOI
|
5 |
Selvadurai, A.P.S. and Gnanendran, C.T. (1989), "An experimental study of a footing located on a sloped fill: Influence of a soil reinforcement layer", Can. Geotech. J., 26(3), 467-473. https://doi.org/10.1139/t89-059.
DOI
|
6 |
Shin, E.C., Das, B.M., Puri, V.K., Yen, S.C. and Cook, E.E. (1993), "Bearing capacity of strip foundation on geogrid-reinforced clay", Geotech. Test. J., 16(4), 534-541. https://doi.org/10.1016/0266-1144(94)90066-3.
DOI
|
7 |
Sloan, S.W. (1988), "Lower bound limit analysis using finite elements and linear programming", Int. J. Numer. Anal. Meth. Geomech., 12(1), 61-77. https://doi.org/10.1002/nag.1610120105.
DOI
|
8 |
Srivastava, A. and Sivakumar Babu, G.S. (2011), "Deflection and buckling of buried flexible pipe-soil system in a spatially variable soil profile", Geomech. Eng., 3(3), 169-188. https://doi.org/10.12989/gae.2011.3.3.169.
DOI
|
9 |
Tang, C., Phoon, K.K. and Toh, K.C. (2014), "Lower-bound limit analysis of seismic passive earth pressure on rigid walls", Int. J. Geomech., 14(5), 04014022. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000385.
DOI
|
10 |
Turker, E., Sadoglu, E., Cure, E. and Uzuner, B.A. (2014), "Bearing capacity of eccentrically loaded strip footings close to geotextile-reinforced sand slope", Can. Geotech. J., 51(8), 884-895. https://doi.org/10.1139/cgj-2014-0055.
DOI
|
11 |
Vahedifard, F., Leshchinsky, B.A., Sehat, S. and Leshchinsky, D. (2014), "Impact of cohesionon seismic design of geosynthetic-reinforced earth structure", J. Geotech. Geoenviron. Eng., 140(6), 04014016. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001099.
DOI
|
12 |
Wang, L., Zhang, G. and Zhang, J.M. (2011), "Centrifuge model tests of geotextile-reinforced soil embankments during an earthquake", Geotext. Geomembr., 29(3), 222-232. https://doi.org/10.1016/j.geotexmem.2010.11.002.
DOI
|
13 |
Yang, S., Leshchinsky, B., Cui, K., Zhang, F. and Gao, Y. (2019), "Unified approach toward evaluating bearing capacity of shallow foundations near slope", J. Geotech. Geoenviron. Eng., 145(12), 04019110. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002178.
DOI
|
14 |
Yang, S., Leshchinsky, B., Cui, K., Zhang, F. and Gao, Y. (2020), "Influence of failure mechanism on seismic bearing capacity factors for shallow foundations near slopes", Geotechnique, 1-46. http://doi.org/10.1680/jgeot.19.P.329.
|
15 |
Yoo, C. (2001), "Laboratory investigation of bearing capacity behaviour of strip footing on geogrid-reinforced sand slope", Geotext. Geomembr., 19(5), 279-298. https://doi.org/10.1016/S0266-1144(01)00009-7.
DOI
|
16 |
Yoo, C. (2016), "Effect of spatial characteristics of a weak zone on tunnel deformation behavior", Geomech. Eng., 11(1), 41-58. http://dx.doi.org/10.12989/gae.2016.11.1.041.
DOI
|
17 |
Zheng, Y. and Fox, P.J. (2017), "Numerical investigation of the geosynthetic reinforced soil-integrated bridge system under static loading", J. Geotech. Geoenviron. Eng., 143(6), 04017008. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001665.
DOI
|
18 |
Chakraborty, D. and Kumar, J. (2014), "Bearing capacity of strip foundations in reinforced soils", Int. J. Geomech., 14(1), 45-58. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000275.
DOI
|
19 |
Abd, A.H. and Utili, S. (2017), "Design of geosynthetic-reinforced slopes in cohesive backfills", Geotext. Geomembr., 45(6), 627-641. https://doi.org/10.1016/j.geotexmem.2017.08.004.
DOI
|
20 |
Brahmi, N., Ouahab, M.Y., Mabrouki, A., Benmeddour, D. and Mellas, M. (2018), "Probabilistic analysis of the bearing capacity of inclined loaded strip footings near cohesive slopes", Int. J. Geotech. Eng., 1-8. https://doi.org/10.1080/19386362.2018.1496005.
|
21 |
Chen, Y., Gao, Y., Yang, S. and Zhang, F. (2018), "Required unfactored geosynthetic strength of three-dimensional reinforced soil structures comprised of cohesive backfills", Geotext. Geomembr., 46(6), 860-868. https://doi.org/10.1016/j.geotexmem.2018.08.004.
DOI
|
22 |
Halder, K. and Chakraborty, D. (2019c), "Probabilistic bearing capacity of strip footing on reinforced soil slope", Comput. Geotech., 116, 1-11. https://doi.org/10.1016/j.compgeo.2019.103213.
|
23 |
Ghanbari, A., Khalilpasha, A., Sabermahani, M. and Heydari, B. (2013), "An analytical technique for estimation of seismic displacements in reinforced slopes based on horizontal slices method (HSM)", Geomech. Eng., 5(2), 143-164. http://doi.org/10.12989/gae.2013.5.2.143.
DOI
|
24 |
Griffiths, D.V., Fenton, G.A. and Manoharan, N. (2002), "Bearing capacity of rough rigid strip footing on cohesive soil: Probabilistic study", J. Geotech. Geoenviron. Eng., 128(9), 743-755. https://doi.org/10.1061/(ASCE)1090-0241(2002)128:9(743).
DOI
|
25 |
Das, B.M., Shin, E.C. and Omar, M.T. (1994), "The bearing capacity of surface strip foundations on geogrid-reinforced sand and clay-a comparative study", Geotech. Geol. Eng., 12(1), 1-14. https://doi.org/10.1007/BF00425933.
DOI
|
26 |
Haldar, A. and Mahadevan, S. (2000), Probability, Reliability, and Statistical Methods in Engineering Design, Wiley, New York, U.S.A.
|
27 |
Halder, K. and Chakraborty, D. (2018), "Bearing capacity of strip footing placed on the reinforced soil slope", Int. J. Geomech., 18(11), 06018025. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001278.
DOI
|
28 |
Halder, K. and Chakraborty, D. (2019a), "Effect of interface friction angle between soil and reinforcement on bearing capacity of strip footing placed on reinforced slope", Int. J. Geomech., 19(5), 06019008. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001394 .
DOI
|
29 |
Halder, K. and Chakraborty, D. (2019b), "Seismic bearing capacity of strip footing placed on the reinforced slope", Geosynth. Int., 26(5), 474-484. https://doi.org/10.1680/jgein.19.00032.
DOI
|
30 |
Halder, K. and Chakraborty, D. (2020), "Influence of soil spatial variability on the response of strip footing on geocell reinforced slope", Comput. Geotech., 122, 1-13. https://doi.org/10.1016/j.compgeo.2020.103533.
|
31 |
Halder, K., Chakraborty, D. and Dash, S.K. (2019), "Bearing capacity of a strip footing situated on soil slope using a non-associated flow rule in lower bound limit analysis", Int. J. Geotech. Eng., 13(2), 103-111. https://doi.org/10.1080/19386362.2017.1325119.
DOI
|
32 |
Huang, C. and Tatsuoka, F. (1994), "Stability analysis for footings on reinforced sand slopes", Soils Found., 34(3), 21-37. https://doi.org/10.3208/sandf1972.34.3_21.
DOI
|
33 |
ITASCA, FLAC 2D Version 7.0.411 (2011), Fast Lagrangian Analysis of Continua in 2 Dimensions, ITASCA Consulting Group Inc.
|
34 |
Luo, N. and Bathurst, R.J. (2017), "Reliability bearing capacity analysis of footings on cohesive soil slopes using RFEM", Comput. Geotech., 89, 203-212. https://doi.org/10.1016/j.compgeo.2017.04.013.
DOI
|
35 |
Zheng, Y., Fox, P.J., Shing, P.B. and McCartney, J.S. (2019), "Physical model tests of half-scale geosynthetic reinforced soil bridge abutments. I: Static loading", J. Geotech. Geoenviron. Eng., 145(11), 04019094. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002152.
DOI
|
36 |
Zheng, Y., McCartney, J.S. and Fox, P.J. (2018), "Numerical study on maximum reinforcement tensile forces in geosynthetic reinforced soil bridge abutments", Geotext. Geomembr., 46(5), 634-645. https://doi.org/10.1016/j.geotexmem.2018.04.007.
DOI
|
37 |
Keskin, M.S. and Laman, M. (2014), "Experimental study of bearing capacity of strip footing on sand slope reinforced with tire chips", Geomech. Eng., 6(3), 249-262. http://doi.org/10.12989/gae.2014.6.3.249.
DOI
|
38 |
Lee, K.M. and Manjunath, V.R. (2000), "Experimental and numerical studies of geosynthetic-reinforced sand slopes loaded with a footing", Can. Geotech. J., 37(4), 828-842. https://doi.org/10.1139/t00-016.
DOI
|
39 |
Lombardi, M., Cardarilli, M. and Raspa, G. (2017), "Spatial variability analysis of soil strength to slope stability assessment", Geomech. Eng., 12(3), 483-503. https://doi.org/10.12989/gae.2017.12.3.483.
DOI
|
40 |
Luo, N. and Bathurst, R.J. (2018), "Deterministic and random FEM analysis of full-scale unreinforced and reinforced embankments", Geosynth. Int., 25(2), 164-179. https://doi.org/10.1680/jgein.17.00040.
DOI
|
41 |
Makrodimopoulos, A. and Martin, C.M. (2006), "Lower bound limit analysis of cohesive-frictional materials using second-order cone programming", Int. J. Numer. Meth. Eng., 66(4), 604-634. https://doi.org/10.1002/nme.1567.
DOI
|
42 |
MATLAB R2015a (2015), [Computer software]. Natick, MA, MathWorks.
|
43 |
MOSEK ApS version 9.0 (n.d.) [Computer software]. MOSEK, Copenhagen, Denmark.
|