• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.112-116
• /
• 2001

Organic Electroluminescence device, which have the single-layer structure of ITO(indium-tin-oxide)/MEH-PPV (Poly[2-(2'-ethylhexyloxy )-5-methoxy-1,4-pheny lenevinylene])/Al(aluminium) and ITO/MEH-PPV/$Alq_3$(tris-8-hydroxyquinolinato aluminium)/Al were fabricated and electrical properties were investigated. Experimental results, in single-layer structure, shown that turn on voltage is about 12 V, and current density increases as a function of increasing temperature. It was explained by thermionic emission. In double-layer structure, thickness $200\AA$ of $Alq_3$ is shown electrical properties that turn on voltage is about 11 V, and current density decreases as a function of increasing temperature.ࠀȀ 耀Ѐ€

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.112-116
• /
• 2001

Organic Electroluminescence device, which have the single-layer structure of ITO(indium-tin-oxide)/MEH-PPV (Poly [2-(2'-ethylhexyloxy)-5-methoxy-1, 4-phenylenevinylene])/Al(aluminium) and ITO/MEH-PPV/Alq$_3$(tris-8-hydroxyquinolinato aluminium)/Al were fabricated and electrical properties were investigated. Experimental results, in single-layer structure, shown that alum on voltage is about 12 V, and current density increases as a function of increasing temperature. It was explained by thermionic emission. In double-layer structure, thickness 200 $\AA$ of Alq$_3$ is shown electrical properties that turn on voltage is about 11V, and current density decreases as a function of increasing temperature.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.519-529
• /
• 2020

The purpose of this study was to provide basic health care data for the climate aspects of park re-cultivation by evaluating air ions according to the type of vegetation in the valley and upper slopes of the mountain park. Simple negative or positive air ions were expected to show the same tendencies, so they were analyzed in terms of correcting the air ion index. By analyzing the air ions according to the topography, it was found that valley > slope in terms of the air ion index. When analyzing air ions according to tree species, we found that evergreen conifers in the valley > the deciduous broad-leaved trees in the valley > the evergreen conifers in the slope = the deciduous broad-leaved trees in the slope. For DBH(Diameter at breast height), the valley large pole > slope large pole > slope medium hard wood, while crown density was analyzed as valley dense > slope dense> valley proper > slope proper. Layered structure analysis showed that the multi-layer structure of the valley > multi-layer structure of the slope = the single-layer structure of the valley > the single-layer structure of the slope. The correlation coefficient was determined according to vegetation type and air ion index in the order of DBH > crown density > layer structure > geomorphic structure. In this study, limits exist except for ridge line, valley, and slopes in urban mountain parks. Therefore, analysis should be made considering both topographical structure and various vegetation types in future studies of air ions.

• Journal of the Korean Ceramic Society
• /
• v.36 no.6
• /
• pp.604-610
• /
• 1999

Silicide layer structures and morphology degradation of the surface and interface of the silicide layers for he Co/refractory metal bilayer sputter-deposited on the P-doped polycrystalline Si substrate and subjected to rapid thermal annealing were investigated and compared with those on the single Si substrate. The CoSi-CoSi2 phase transition temperature is lower an morphology degradation of the silcide layer occurs more severely for the Co/refractorymetal bilayer on the P-doped polycrystalline Si substrate than on the single Si substrate. Also the final layer structure and the morphology of the films after silicidation annealing was found to depend strongly upon the interlayer metal. The layer structure after silicidation annealing of Co/Hf/doped-poly Si is Co-Hf alloy/polycrystalline CoSi2/poly Si substrate while that of Co/Nb is polycrystalline CoSi2/NbSi2/polycrystalline CoSi2/poly Si.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.4-4
• /
• 2010

Single-crystalline IGZO (Indium-Gallium-Zinc oxide) was fabricated on c-sapphire substrate. Single crystal ZnO was used as a buffer layer, and post-annealing was treated in $900^{\circ}C$ for crystallization of IGZO. Crystallized IGZO formed superlattice structure spontaneously induced to c-axis direction by ZnO butTer layer, the composition of IGZO was varied by amount of ZnO. Crystallinity and composition of IGZO was analyzed by X-ray Diffraction and Transmission Electron Microscopy.

• Journal of Information Display
• /
• v.3 no.1
• /
• pp.1-5
• /
• 2002

A series of fully conjugated polymers containing new arylenevinylene units were synthesized and their light-emitting properties were investigated. A bisphosphonate containing tetraphenyl group was made to react with three different dialdehyde monomers to produce fully conjugated alternating copolymers. The photoluminescence (PL) and the electroluminescence (EL) peak wavelengths of the polymers were varied from 500 nm to 460 nm depending on the polymer structure. Single layer EL devices using the polymers as an emissive layer have been fabricated. The single layer EL devices became visible between 12-22 V and emitted blue light.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.2 s.109
• /
• pp.16-31
• /
• 2005

This study was carried out to design a bridge-type ecological corridor plan in a forested neighborhood park affected by road construction in Dongjak-gu, Seoul. In order to study the site conditions, we analyzed topography, ecosystem structure, and user behavior and trail use. Existing vegetation was classified into 12 types. Based on a vegetation analysis, the Populus albaglandulosa and Robinia pseudoacacia communities, where planted species are dominant, were distributed extensively in the southern forest area. Planted areas with a single-layer structure of Korean landscape woody plants and Robinia pseudoacacia communities with a single-layer structure were distributed extensively in the northern forest and water-supply area. Based on a study of 28 quadrats, the similarity index between the multi-layer plant communities distributed in the southern forest and the single-layer planted areas was low. Twenty-four species of wild birds(355 individuals) were found in the survey area, including nine interior species and three urban species. The study of user behavior and numbers showed most users were walkers and few users were observed in the southern forest while most users were observed in the northern forest and water supply area. We selected some wild birds as model species to represent migrating species believed to use this park as an ecological corridor during migration. We suggested the new park plan include the following: improvement of vegetation structure for wildbird migration and habitat, connection of park trails for users and presentation of a landscape linked to nature.

• Journal of Korean Society on Water Environment
• /
• v.38 no.4
• /
• pp.171-176
• /
• 2022

Recently, an autotrophic single-stage nitrogen removal (ASSNR) process based on the anaerobic ammonium oxidation (ANAMMOX) reaction has been proven as an economical ammonia treatment. It is highly evident that double-layered gel beads are a promising alternative to the natural biofilm for ASSNR because of the high mechanical strength of poly(vinyl alcohol) (PVA)/alginate structure and efficient protection of ANAMMOX bacteria from dissolved oxygen (DO) due to the thick outer layer. However, the thick outer layer results in severe mass transport limitation and consequent lowered bacterial activity. Therefore, the effects of the thickness of the outer layer on the overall reaction rate were tested in the biofilm model using AQUASIM for ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB) and ANAMMOX bacteria. A thickness of 0.5~1.0 mm is preferred for the maximum total nitrogen (TN) removal. In addition, a DO of 0.5 mg/L resulted in the best total nitrogen removal. A higher DO induces NOB activity and consequent lower TN removal efficiency. The optimal density of AO B and NO B density was 1~10% for a 10% ANAMMOX bacterial in the double-layered PVA/alginate gel beads. The real effects of operating parameters of the thickness of the outer layer, DO and concentrations of biomass balance should be intensively investigated in the controlled experiments in batch and continuous modes.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2541-2543
• /
• 1998

This paper describes the fabrication process to fabricate metallic structure of high aspect ratio using LlGA-like process. SU-8 is used as an electroplating mold. SU-8 is an epoxy-based photoresist, designed for ultrathick PR structure with single layer coating [1,2]. We can get more than $100{\mu}m$ thick layer by single coating with conventional spin coater, and applying multiple coating can make thicker layers. In the experiments, we used different kinds of SU-8, having different viscosity. To optimize the conditions for mold fabrication process, experiments are performed varying spinning time and speed, soft-bake, develop and PEB (Post Expose Bake) condition. With the optimized condition, minimum line and space of $3{\mu}m$ pattern with a thickness of $40{\mu}m$ and $4{\mu}m$ pattern with a thickness of $130{\mu}m$ were obtained. Using the patterned PR as a plating mold, metallic structure was fabricated by electroplating. We have fabricated a electroplated nickel comb actuator using SU-8 as plating mold. The thickness of PR mold is $45{\mu}m$ and that of plated nickel is$40{\mu}m$. Minimum line of the mold is $5{\mu}m$. Patterned metallic layer or polymer layer, which has selectivity with the structural plated metallic layer, can be used as sacrificial layer for fabrication of free-standing structure.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.777-778
• /
• 2006

This paper deals with the optimum rotor design approach about the multi-layer design of the buried magnets in an Interior Permanent Magnet Synchronous Motor (IPMSM), on the efficiency improvement by using Response Surface Methodology (RSM). In the multi-layer design of the prototype 15kw IPMSM, the constant amount of buried PM is split from the single-layer into double-layer design for improving the efficiency characteristics. The optimum double-layer rotor structure is built with the help of RSM analysis. The improvement of IPMSM efficiency is verified by the Finite Element Method (FEM) results comparison with the prototype single-layer IPMSM.