• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.222-231
• /
• 2017

In this paper, a new architecture for a cost-effective power conditioning systems (PCS) using a single-sourced asymmetric cascaded H-bridge multilevel inverter (MLI) for photovoltaic (PV) applications is proposed. The asymmetric MLI topology has a reduced number of parts compared to the symmetrical type for the same number of voltage level. However, the modulation index threshold related to the drop in the number of levels of the inverter output is higher than that of the symmetrical MLI. This problem results in a modulation index limitation which is relatively higher than that of the symmetrical MLI. Hence, an extra voltage pre-regulator becomes a necessary component in the PCS under a wide operating bias variation. In addition to pre-stage voltage regulation for the constant MLI dc-links, another auxiliary pre-regulator should provide isolation and voltage balance among the multiple H-bridge cells in the asymmetrical MLI as well as the symmetrical ones. The proposed PCS uses a single-ended DC-DC converter topology with a coupled inductor and charge-pump circuit to satisfy all of the aforementioned requirements. Since the proposed integrated-type voltage pre-regulator circuit uses only a single MOSFET switch and a single magnetic component, the size and cost of the PCS is an optimal trade-off. In addition, the voltage balance between the separate H-bridge cells is automatically maintained by the number of turns in the coupled inductor transformer regardless of the duty cycle, which eliminates the need for an extra voltage regulator for the auxiliary H-bridge in MLIs. The voltage balance is also maintained under the discontinuous conduction mode (DCM). Thus, the PCS is also operational during light load conditions. The proposed architecture can apply the module-integrated converter (MIC) concept to perform distributed MPPT. The proposed architecture is analyzed and verified for a 7-level asymmetric MLI, using simulation results and a hardware implementation.

• 가정과삶의질연구
• /
• 제5권2호
• /
• pp.11-27
• /
• 1987

This study examined job satisfaction levels between employed single women and employed married women. The specific objectives of this study were; (1) to investigate differences in the level of job satisfaction between employed single women and employed married women; (2)to investigate the factors which influence the level of job satisfaction; (3)to investigate the relationship between job satisfaction and life satisfaction. the data used in this study included 441 working women from 290 (65.8 %) single women and 151 (34.2%) married women. Statistical analyses were conducted using frequencies, percentiles, mean , t-test , ANOVA, pearson's correlation and a stepwise multiple regression. The major findings were ; (1) at the P<.005 level, there was a significant difference in the job Satisfaction Index (JSI) between employed single and married women by using the t-test ; (2) Occupation, type of organization , job experiences, travel time from home to work. unionization, age, and health status were significantly related to the JSI by using the one-way ANOVA; (3) Thee was an interaction effect between income and marital status on the JSI, and between education and marital status on the JSI; (4) Using a stepwise multiple regression method, the order of variables as they were entered in the model were different between employed single and married women; (5) There was a positive relationship between the JSI and Life Satisfaction Index(r=.41)

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.209-219
• /
• 2007

100PPM 품질인증시스템은 1995년 공업진흥청의 주도하에 추진되어져, 우리나라 산업부분의 품질경쟁력 제고에 기여하였다. 2000년에는 국내의 중소기업을 대상으로 보다 더 완벽한 수준의 Single PPM 품질인증시스템으로 상향 조정토록 하였고, 출하불량률과 시장 불량률 수준을 10ppm 이하로 줄이는 것을 품질목표로 하고 있다. 현재까지 1.818개의 회사들이 Single PPM 품질인증시스템을 인증 받았으며, Single PPM 품질혁신운동은 21C의 사회 경제적인 무결점 목표를 달성하기 위한 품질혁신운동이다. 이 논문의 목적은 Single PPM 품질혁신운동이 현재 처해있는 문제점들을 개선하고자, Kano 모델에 기반을 둔 글로벌 지속가능 품질혁신(GSQI) 지수를 개발하고, 이를 통하여 Single PPM 품질혁신운동의 개선을 도모하고자 함이다.

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.127-132
• /
• 2014

This study is concerned with process capability index in single process. We enumerated issues on the calculation of process capability index and described the effects of these issues. We explained the development process and the reason of the representative existing process capability indices. We investigated whether the indices agree with the concept of process capability and drew the problems from those results. In addition, we proposed alternative and direction to seize the process capability necessary to the field.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.69-75
• /
• 1999

This study was performed to investigated the application of mixed resins for corrugated container board. The corrugated container board yields a sandwich structure in which a linerboard material is glued to a corrugated medium . Now, manufacturing corrugated container boards don't provide sufficient strength, and result in box failure during shipping . Therefore improvement of box strength is necessary . In this study, we intend to improve box strength by improving corrugated medium strength with mixed resins and to find the optimum treatment condition of this resins. First, we tried to mixed resins as Starch+CMC, Starch_Irea, CMC+Urea, Second, investigated to applicability of this resins for corrugated medium , and the third, measured tensile index, burst index, and edgewise compression index on liner, medium paper, and single faced corrugated container board. In this test results, we obtained that the improvement ratios of tensile index in liner and medium paper were approximately 80-185%, 60-118% , respectively. The respecting improvement ratios of edgewise compression index of single faced corrugated container board was approximately 91-124%, relatively. In addition, we concluded that optimum condition in mixing ratio was 1 :3 with CMC + Urea and the ap[plication amounts was 9% on materials. Fro manufacture of corrugated container board, optimum condition in mixing ratio was 1 : 3 with 5% CMC +Urea , because of considering to improvement of strength on cost.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2005년도 춘계학술발표대회
• /
• pp.51-54
• /
• 2005

This paper proposes an index structure which is used to process X-Path on S-XML data. There are many previous index structures based on tree structure for X-Path processing. Because of general tree index's top-down query fashion, the unnecessary node traversal makes heavy access and decreases the query processing performance. And both of the two query types for X-Path called single-path query and branching query need to be supported in proposed index structure. This method uses a combination of path summary and the node indexing. First, it manages hashing on hierarchy elements which are presented in tag in S-XML. Second, array blocks named path summary array is created in each node of hashing to store the path information. The X-Path processing finds the tag element using hashing and checks array blocks in each node to determine the path of query's result. Based on this structure, it supports both single-path query and branching path query and improves the X-Path processing performance.

• 대한한의진단학회지
• /
• 제17권3호
• /
• pp.253-262
• /
• 2013

Objectives This study is on the quantifying method for the acupuncture-moxa cautery heat response index, which are based on the some definitions. Methods The magnitude of the acupuncture-moxa cautery is defined by the pain-feeling of the acupuncture-moxa cautery stimulation: the stimulation magnitude of the acupuncture is 1, that of the direct moxa-cautery is 2, and that of the indirect moxa-cautery is 0.5. The heat variation of the acupuncture-moxa cautery stimulation is defined by the heat variations of the characteristic points pre/post-stimulations in the stenosis of the lumber. The acupuncture-moxa cautery heat response index is defined by the ratio of between the magnitude of the heat variation and the natural logarithmic magnitude of the stimulation. Results With the respect of the acupuncture-moxa cautery heat response index, I experimented and estimated 4 types of stimulations in the stenosis of the lumber: the single acupuncture stimulation with 40%, the single direct moxa-cautery stimulation with 52%, the combinational acupuncture-moxa cautery stimulations with 27%, and the combinational acupuncture-indirect electronic moxa-cautery stimulations with 53%. Conclusions According to the acupuncture-moxa cautery heat response index. the combinational acupuncture-moxa cautery stimulations especially need to be changed to the combinational acupuncture-indirect electronic moxa-cautery stimulations.

• 정보관리학회지
• /
• 제32권4호
• /
• pp.205-221
• /
• 2015

학술지의 인용빈도를 특정하여 산출된 지수로 단일 논문의 영향력을 평가하는 것에 대한 비판으로 인해 단일 논문의 인용 영향력을 측정하는 인용지수에 대한 연구가 다양하게 시도되었다. 이 연구에서는 8개의 단일 논문 인용영향력 평가 지수를 살펴보고 KCI 논문 데이터베이스를 대상으로 각 인용지수의 분야별 편향성을 조사하여 보았다. 대상 지수는 단순 인용빈도, 페이지랭크, f-값, CCI, c-지수, 단일문헌 h-지수, 단일문헌 hs-지수, cl-지수였다. 분석결과 페이지랭크가 학문 분야별 균등성, 학문 분야 내에서 학술지별 균등성 영역에서 가장 편향성이 없는 것으로 나타났다. 반면에 단순 인용빈도는 특정 학문분야나 특정 학술지에 편향된 결과를 산출할 가능성이 높은 것으로 나타났다. KCI 데이터베이스에서는 논문의 단순 인용빈도만 제공하고 있는데, 분야별 균등성을 가장 잘 유지하는 지수인 논문 페이지랭크를 함께 제공할 필요가 있다. 아울러 인용한 문헌의 인용빈도만으로 산출이 가능해서 이용자의 검색 결과로부터 바로 산출할 수 있는 지역 네크워크 지수 중에서는 cl-지수가 가장 균등성을 잘 유지하므로 계산 과정과 서비스가 손쉬운 지수로 함께 제공하는 것도 검토해야 한다.

• 한국산학기술학회논문지
• /
• 제16권6호
• /
• pp.4131-4136
• /
• 2015

본 논문은 반사방지막의 성능을 더 정확히 비교 및 분석하기 위하여 기존 방법과 달리 반사방지막에 수직입사가 아닌 입사각이 $8^{\circ}$에서 $60^{\circ}$까지 변화한다고 가정하고 단층 구조와 다층 구조의 반사방지막의 평균반사율을 계산하고 비교하였다. 입사파의 파장범위를 400 nm ~ 1200 nm 라고 가정하고, 분석에 사용된 반사방지막의 구조는 두께 180 nm인 1차 및 5차 함수의 굴절률 분포를 갖는 6층 구조와 균일한 굴절률 분포를 갖는 단층구조이다. 분석 결과로써 180 nm 단층구조의 경우 평균반사율이 19.6 % 이고, 같은 두께의 6층 구조의 1차 함수 굴절률 분포에서는 14.2 % 이고, 5차 함수 경우에는 11.6 %의 결과를 얻어 균일한 굴절률 분포의 단층구조 보다 5차 함수 굴절률 분포를 갖는 6층 구조의 경우 약 8%의 반사율 감소 효과를 보았다. 이러한 결과는 향후 광소자 및 광 필터에 적용되는 반사방지막 제작에 용용 될 수 있다고 판단된다.

• 대한정형도수물리치료학회지
• /
• 제15권2호
• /
• pp.80-87
• /
• 2009

Purpose: This study was to determine the effects of a early exercise program on the pain, disability and balance after single-level lumbar discectomy. Methods: Forty patients were randomized into experimental(N=20) and control(N=20) groups. Three days after surgery, patients in the experimental group undertook a 4-week exercise program. Assessments were performed in all patients during the week before surgery and at 4 weeks after. The assessment included measures of back and leg pain(VAS), Oswestry disability index(ODI), stability index(SI) and weight distribution index(WDI). Results: At 4 weeks, VAS, ODI, SI, WDI were significantly reduced in both groups(p<.01). Also the experimental group was significantly reduced back and leg pain(VAS), ODI and WDI were better than the control group(p<.05). Conclusion: It seems that early exercise program is more effective in patients who undergo single-level lumbar discectomy.