• Restorative Dentistry and Endodontics
• /
• v.19 no.2
• /
• pp.611-620
• /
• 1994

The purpose of this study was to evaluate the effect of post space preparation on apical sealing according to the methods and time of gutta percha removal. Forty six extracted single rooted teeth were selected for this study. Forty teeth were used as experimental groups and six teeth as control groups. Forty teeth were routinely prepared by step-back method and obturated with gutta percha cones and zinc oxide-eugenol cement using lateral condensation. All obturated teeth were divided into 4 groups of 10 teeth each. In each group of 1, 2, 3, heated plugger, gate glidden drill and chloroform and K-file were used respectively for post space preparation by removing the gutta percha immediately after obturation. In group 4, post space were prepared with gate glidden drill one week after obturation. In all experimental groups, the post space were prepared so that 4mm of apical gutta percha remained. After post space preparation, apical leakage were measured with electrochemical method for 28 days and analyzed statistically. The following results were obtained ; 1. No statistically significant differences in apical leakage were occured among the experimental groups using heated plugger, gate glidden drill and chloroform and K-file to remove the gutta percha immediately after obturation. 2. No significant difference in apical leakage was found between the teeth prepared post space immediately after obturation and those prepared 1 week after obturation. 3. In all experimental groups, the apical leakage was increased with time passage regardless of the post space preparation time and the gutta percha removal techniques.

• Journal of radiological science and technology
• /
• v.23 no.1
• /
• pp.103-111
• /
• 2000

In recent years, medical procedures have become more complex, while financial pressures for shortened hospital stays and increased efficiency in patient care have increased. As a result, several shortcomings of present film-based systems for managing medical images have become apparent. Maintaining film space is labor intensive and consumes valuable space. Because only single copies of radiological examinations exist, they are prone to being lost or misplaced, thereby consuming additional valuable time and expense. In this paper, MINI-PACS for image archiving, transmission, and viewing offers a solution to these problems. Proposed MINI-PACS consists of mainly four parts such as Web Module, Client-Server Module, Internal Module, Acquisition Module. In addition, MINI-PACS system includes DICOM Converter that Non-DICOM file format converts standard file format. In Client-Server Module case, Proposed system is combined both SCU(Service Class User: Client) part and SCP(Service Class Provider: Server)part therefore this system provides the high resolution image processing techniques based on windows platform. Because general PACS system is too expensive for Medium and Small hospitals to install and operate the full-PACS. Also, we constructed Web Module for database connection through the WWW.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.3
• /
• pp.197-212
• /
• 1990

This paper present a new design concept of a single chip 16-bit data path using the concept of modular design, the whole system is divided into several blocks which can be operated as an independent system itself. Making the internal blocks can act as a subsystem, it is possible to shorten design turn-around time, to be redesigned effectively, and to optimize the system performance. The designed system is data path. The data path is to manipulate 16-bit integer data. It is composed of aritmetic logic unit, register file, barrel shifter and bus circuit. The widths and lengths of gate in the circuit were determined using SPICE2. The results of circuit simulation were in good agreement with expected circuit characteristics.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.151-158
• /
• 2019

With the recent advances of memory technologies, high-performance non-volatile memories such as non-volatile dual in-line memory module (NVDIMM) have begun to be used as an addition or an alternative to server-side storages. When these memory bus-connected storages (MBSs) are installed over non-uniform memory access (NUMA) servers, the distance between NUMA nodes and MBSs is one of the crucial factors that influence file processing performance, because the access latency of a NUMA system varies depending on its distance from the NUMA nodes. This paper presents the design and implementation of a high-performance logical volume manager for MBSs, called MBS-LVM, when multiple MBSs are scattered over a NUMA server. The MBS-LVM consolidates the address space of each MBS into a single global address space and dynamically utilizes storage spaces such that each thread can access an MBS with the lowest latency possible. We implemented the MBS-LVM in the Linux kernel and evaluated its performance by porting it over the tmpfs, a memory-based file system widely used in Linux. The results of the benchmarking show that the write performance of the tmpfs using MBS-LVM has been improved by up to twenty times against the original tmpfs over a NUMA server with four nodes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.23-32
• /
• 2015

In order to complete engineering works of the digital substation, Both Data transmission among a variety of IEDs and HMIs, and single line diagram of the substation might be done based on XML documents published in IEC 61850 international standards. This kind of XML based engineering process for the digital substation must be implemented not by manual written work but by the engineering tool using a computer. But most of the engineering tools do not support system based engineering works such as single line diagram of the substation but have only function to set IEDs as single device unit. Accordingly, this paper presents a new design method of the system based engineering description applicable to real IEC 61850 based substation through analyzing the current international standard and its sampled engineering file, and shows implementation of the engineering tool of the digital substation with the result of this study.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.989-1009
• /
• 2018

Rapid advances in science and technology with exponential development of smart mobile devices, workstations, supercomputers, smart gadgets and network servers has been witnessed over the past few years. The sudden increase in the Internet population and manifold growth in internet speeds has occasioned the generation of an enormous amount of data, now termed 'big data'. Given this scenario, storage of data on local servers or a personal computer is an issue, which can be resolved by utilizing cloud computing. At present, there are several cloud computing service providers available to resolve the big data issues. This paper establishes a framework that builds Hadoop clusters on the new single-board computer (SBC) Mobile Raspberry Pi. Moreover, these clusters offer facilities for storage as well as computing. Besides the fact that the regular data centers require large amounts of energy for operation, they also need cooling equipment and occupy prime real estate. However, this energy consumption scenario and the physical space constraints can be solved by employing a Mobile Raspberry Pi with Hadoop clusters that provides a cost-effective, low-power, high-speed solution along with micro-data center support for big data. Hadoop provides the required modules for the distributed processing of big data by deploying map-reduce programming approaches. In this work, the performance of SBC clusters and a single computer were compared. It can be observed from the experimental data that the SBC clusters exemplify superior performance to a single computer, by around 20%. Furthermore, the cluster processing speed for large volumes of data can be enhanced by escalating the number of SBC nodes. Data storage is accomplished by using a Hadoop Distributed File System (HDFS), which offers more flexibility and greater scalability than a single computer system.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.508-514
• /
• 2009

The purposes of this study were to compare the efficacy of irrigation systems by removing a calcium hydroxide $(Ca(OH)_2)$ paste from the apical third of the root canal and the effect of the patency file. Sixty single rooted human teeth were used in this study. The canals were instrumented by a crown-down manner with .04 taper ProFile to ISO #35. $Ca(OH)_2$ and distilled water were mixed and placed inside the root canals. The teeth were divided into 6 groups according to the root canal irrigation system and the use of patency file as follows: group 1 - conventional method: group 2 - $EndoActivator^{(R)}$: group 3 - $EndoVac^{(R)}$; group 4 - conventional method, patency: group 4 - $EndoActivator^{(R)}$, patency; group 6 - $EndoVac^{(R)}$, patency. All teeth were irrigated with sodium hypochlorite. After the root canal irrigation, the teeth were split in bucco-lingual aspect. Percentage of the root canal surface coverage with residual $Ca(OH)_2$ until 3 mm from working length was analyzed using Image Pro Plus ver. 4.0. Statistical analysis was performed using the One-way ANOVA, t-test and Scheffe's post-hoc test. Conventional groups had significantly more $Ca(OH)_2$ debris than $EndoActivator^{(R)}$, $EndoVac^{(R)}$ groups. There was no significant difference between $EndoActivator^{(R)}$ and $EndoVac^{(R)}$ groups. Groups with patency file showed more effective in removing $Ca(OH)_2$ paste than no patency groups. but. it was no significant difference. This study showed that $EndoActivator^{(R)}$ and $EndoVac^{(R)}$ systems were more effective in removing $Ca(OH)_2$ paste from the apical third of the root canal than conventional method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.542-547
• /
• 2003

A network based intrusion detection system(N-IDS), can detect intruders coming in through packets in real time environment. The ability of capture of packet is the most important factor when we evaluate the performance of the system. The time delay between the time handling one packet capture and next one is variant become of packet handling mechanism. So for N-IDS can not settle this problem because most systems use a single processor. In this thesis, we solve the problem of irregular tine delay with a file socket and multi-thread processing. We designed and implement, the Crasto system. By an accurate observation, the performance testing shows that the Crasto reduces the capture delay time to 1/5 comparing to the existing single process N-IDS, and maintain delay time regularly.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.4
• /
• pp.1286-1306
• /
• 2022

Searchable symmetric encryption (SSE) provides a safe and effective solution for retrieving encrypted data on cloud servers. However, the existing SSE schemes mainly focus on single keyword search in single client, which is inefficient for multiple keywords and cannot meet the needs for multiple clients. Considering the above drawbacks, we propose a scheme enabling dynamic multi-client and Boolean query in searchable symmetric encryption for cloud storage system (DMC-SSE). DMC-SSE realizes the fine-grained access control of multi-client in SSE by attribute-based encryption (ABE) and novel access control list (ACL), and supports Boolean query of multiple keywords. In addition, DMC-SSE realizes the full dynamic update of client and file. Compared with the existing multi-client schemes, our scheme has the following advantages: 1) Dynamic. DMC-SSE not only supports the dynamic addition or deletion of multiple clients, but also realizes the dynamic update of files. 2) Non-interactivity. After being authorized, the client can query keywords without the help of the data owner and the data owner can dynamically update client's permissions without requiring the client to stay online. At last, the security analysis and experiments results demonstrate that our scheme is safe and efficient.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.227-235
• /
• 1993

In this paper, the development of a high performance flexible controller is described. The hardware of the controller, based on VME-bus, consists of four M68020 single-board computers (32-bit) with M68881 numerical coprocessors, two M68040 single board donputers, I/O devices (such as A/D and D/A converters, paraller I/O, encoder counters), and bus-to-bus adaptor. This software, written in C and based on X-window environment with Unix operating system, includes : text editor, compiler, downloader, and plotter running in a host computer for developing control program ; device drivers, scheduler, and mathemetical routines for the real time control purpose ; message passing, file server, source level debugger virtural terminal, etc. The hardware and software are structured so that the controller might have both flexibility and extensibility. In papallel to the controller, a three degrees of freedom kinematically redundant robot has been developed at the same time. The development of the same time. The development of the robot was undertaken in order to provide, on the one hand, a computationally intensive plant to which to apply the controller, and on the other hand a research tool in the field of kinematically redundant manipulator, which is, as such, an important area. By using the controller, dynamic control of the redundant manipulator was successfully experimented, showing the effectiveness and flexibility of the controller.