• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.65-73
• /
• 2014

In this paper, the detection scheme of the voltage variation using a two difference voltage is proposed. The conventional sag detector is from a single-phase digital phase-locked loop (DPLL) that is based on a d-q transformation using an all-pass filter (APF). The APF generates a virtual q-axis voltage component with $90^{\circ}$ phase delay but the APF cannot generate the virtual q-axis voltage depending on the phase of the grid voltage. To overcome the problem, q-axis voltage component is generated from difference between the current and previous value of d-axis voltage component in the stationary reference frame. However, the difference voltage around the zero crossing is not enough to detect the voltage sag. Therefore, the new detection scheme using the two difference voltage which can detect the sag around the zero crossing voltage is proposed.

• Journal of Plant Biotechnology
• /
• 제31권4호
• /
• pp.261-266
• /
• 2004

Agrobacterium을 이용하여 도입된 유전자의 세대진전, 교잡 등에 따른 유전적 안정성을 확인코자, 형질 전환으로부터 얻어진 bar 유전자가 도입된 형질전환 식물체들을 상호 교배, 여교배, T$_4$ 세대까지의 자식의 반복 등에 의해 유전적 안정성을 검토하였다. 조합이나 계통에 따라서는 일부 멘델식 분리를 따르지 않고 제초제 Basta에 대한 저항성이 사라지거나 저항성개체보다 감수성개체가 기대치보다 많은 등의 경우가 있었으나, 대부분 멘델식 분리를 따르고 있어 세대진전, 교배 등에 의해서도 유전적 안정성이 높게 유지됨을 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제73권4호
• /
• pp.367-379
• /
• 2020

In recent railway projects where the railway connects between cities, newly planned tunnels are often located close to, or beneath an existing tunnel. Many claims and petitions have voiced public concern about the vibration and noise resulting from the situation. Vibrations and noises are engineering issues as well as environmental problems, and have become more important as people have become more concerned with their the quality of life. However, it is unlikely that the effects of vibration in situations where trains simultaneously pass a multileveled tunnel crossing have been appropriately considered in the phase of planning and design. This study investigates the superposition characteristic of ground-born vibrations from a multileveled tunnel crossing. The results from model tests and numerical analysis show that the ground-born vibration can be amplified by a maximum of about 30% compared to that resulting from the existing single tunnel. Numerical parametric study has also shown that the vibration amplification effect increases as the ground stiffness, the tunnel depth, and the distance between tunnels decrease.

• 전기의세계
• /
• 제28권3호
• /
• pp.51-56
• /
• 1979

The purpose of this paper is to study the conversion of single phase to three phase. In the proceeding of phase conversion, it is very convinence to convert two-phase from single phase using cycloconverter before and then two to three phase by scott connection transformer. There are also systematized zero-crossing, mono vibrator and ring counter circuit for the gate trigger circuits of cycloconverter. The wave forms of three phase by experimental results are analyzed and discussed the relation of phase difference among them.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.658-665
• /
• 2011

In the present paper, a novel fast peak detector for single- or three-phase unsymmetrical voltage sags is proposed. The proposed detector is modified from a single-phase digital phase-locked loop based on a d-q transformation using an all-pass filter (APF). APF generates a virtual phase with $90^{\circ}$ phase delay. However, this virtual phase cannot reflect a sudden change of the grid voltage in the moment of voltage sag, which causes a peak value to be significantly distorted and to settle down slowly. Specifically, the settling time of the peak value is too long when voltage sag occurs around a zero crossing, such as phase $0^{\circ}$ and $180^{\circ}$. This paper describes the operating principle of the APF problem and proposes a modified all-pass filter (MAPF) to mitigate the inherent APF problem. In addition, a new fast peak detector using MAPF is proposed. The proposed detector is able to calculate a peak value within 0.5 ms, even when voltage sag occurs around zero crossing. The proposed fast peak detector is compared with the conventional detector using APF. Results show that the proposed detector has faster detection time in the whole phase range. Furthermore, the proposed fast peak detector can be effectively applied to unsymmetrical three-phase voltage sags. Simulation and experimental results verify the advantages of the proposed detector and MAPF.

• 한국자원식물학회지
• /
• 제32권5호
• /
• pp.509-518
• /
• 2019

본 연구는 바이오에너지용 이질 3배체 억새(Miscanthus ${\times}$ giganteus) 품종육성 위한 교배재료인 물억새(M. sacchariflorus)와 참억새(M. sinensis) 출수기 단축과 단교배 조건을 구명하기 위해 수행하였다. 물억새와 참억새를 12시간 일장, 자연일장 조건에서 재배하여 출수기 단축에 미치는 단일효과를 조사하였다. 출수기에 일중 화분 발아시간, 절단한 화분친 이삭 활력 유지 및 격리방법 등 단교배 조건을 구명하여 이를 활용한 억새의 자가수정 여부를 조사하고 시험교배를 실시하였다. 참억새와 물억새 모두 12시간 일장의 단일조건에서 재배한 것이 자연일장에 재배한 것에 비해 출수 소요일수가 단축되었다. 화분 발아시간은 물억새는 오전 6시에 왕성하였으나 시간이 경과할수록 발아율이 낮아져 오전 8시에는 10% 이하만 발아하였다. 참억새 화분은 오전 7시에 50% 이상이 발아하였고 그 이후로 낮아졌다. 화분친인 참억새 이삭을 절단하여, 절화 보존액에 꽂아 백색 부직포로 격리하였을 때 절화 보존액량이 많을수록 활력 유지 일수가 증가하여 150 mL에서 물억새, 참억새 모두 7일간 개화 및 화분 비산을 지속하였다. 이 때 화분 발아율은 참억새와 물억새 모두 4일까지 40%를 유지하였다. 참억새와 물억새는 자가수정율이 2.5% 이하로 낮고, 자연교잡 임실율은 출수기가 빠른 유전자원에서 54.4%까지 높았다. 억새 종간교배 방법 효과 확인을 위해 물억새 4배체와 참억새 2배체 간 14조합 시험교배 결과 총 437립의 교배종자를 얻었다. 본 연구로 도출된 억새 종간 단교배 방법은 우수한 종자친과 화분친으로 교배종자를 얻을 수 있어 향후 바이오매스 수량이 많으면서, 종자가 맺히지 않은 이질 3배체 품종육성에 활용할 수 있을 것으로 판단된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.419-420
• /
• 2009

• 제어로봇시스템학회논문지
• /
• 제9권11호
• /
• pp.925-936
• /
• 2003

The manipulability analysis of the parallel-type rolling mill proposed in Hong et al. [1] is re-visited. The parallel rolling mill uses two Stewart platforms in opposite direction for the generation of 6 degree-of-freedom motions of each roll. The objective of this new parallel rolling mill is to permit an integrated control of the strip thickness, strip shape, pair crossing angle, uniform wear of rolls, and tension of the strip. New forward/inverse kinematics problems, in contrast with [1], are formulated. The forward kinematics problem is defined as the problem of finding the roll-gap and the pair-crossing angle of two work rolls for given lengths of twelve legs. On the other hand, the inverse kinematics problem is defined as the problem of finding the lengths of twelve legs when the roll-gap, the pair-crossing angle, and the position and orientation of one work roll are given. The method of manipulability analysis used in this paper follows the spirit of [1]. But, because the rolling force and moment exerted from both upper and lower rolls have been included in the manipulability analysis, more accurate results than the use of a single platform can be achieved. Two. kinematic parameters, the radius of the base and the angle between two neighboring joints, are optimally designed by maximizing the global manipulability measure in the entire workspace.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1168-1177
• /
• 2015

This paper presents a scheme to improve the line current distortion of power factor corrector (PFC) topology at the zero crossing point using a predictive control algorithm in both the continuous conduction mode (CCM) and discontinuous conduction mode (DCM). The line current in single-phase PFC topology is distorted at the zero crossing point of the input AC voltage because of the characteristic of the general proportional integral (PI) current controller. This distortion degrades the line current quality, such as the total harmonic distortion (THD) and the power factor (PF). Given the optimal duty cycle calculated by estimating the next state current in both the CCM and DCM, the proposed predictive control algorithm has a fast dynamic response and accuracy unlike the conventional PI current control method. These advantages of the proposed algorithm lower the line current distortion of PFC topology. The proposed method is verified through PSIM simulations and experimental results with 1.5 kW bridgeless PFC (BLPFC) topology.

• ETRI Journal
• /
• 제45권5호
• /
• pp.768-780
• /
• 2023

The application of unmanned aerial vehicles (UAVs) has recently attracted considerable interest in various areas. A three-dimensional multiple-input multiple-output concentric two-hemisphere model is proposed to characterize the scattering environment around a vehicle in an urban UAV-to-vehicle communication scenario. Multipath components of the model consisted of lineof-sight and single-bounced components. This study focused on the key parameters that determine the scatterer distribution. A time-variant process was used to analyze the nonstationarity of the proposed model. Vital statistical properties, such as the space-time-frequency correlation function, Doppler power spectral density, level-crossing rate, average fade duration, and channel capacity, were derived and analyzed. The results indicated that with an increase in the maximum scatter radius, the time correlation and level-crossing rate decreased, the frequency correlation function had a faster downward trend, and average fade duration increased. In addition, with the increase of concentration parameter, the time correlation, space correlation, and level-crossing rate increased, average fade duration decreased, and Doppler power spectral density became flatter. The proposed model was compared with current geometry-based stochastic models (GBSMs) and showed good consistency. In addition, we verified the nonstationarity in the temporal and spatial domains of the proposed model. These conclusions can be used as references in the design of more reasonable communication systems.