• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2319-2328
• /
• 2018

This paper introduces a control method for a transformerless MMC-HVDC system. The proposed method can effectively control the grid currents of the MMC-HVDC system under unbalanced grid conditions such as a single line-to-ground fault. The proposed method controls the currents of the positive sequence component and the negative sequence component without separating algorithms. Therefore, complicated calculations for extracting the positive sequence and the negative sequence component are not required. In addition, a control method to regulate a zero sequence component current under unbalanced grid conditions in the transformerless MMC-HVDC system is also proposed. The validity of the proposed method is verified through PSCAD/EMTDC simulation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.316-317
• /
• 2018

This paper propse the DC link capacitor voltage balancing control for three level neutral point clamped converter with harmonic component injection method. The injcetion voltage consists of harmonic component and DC link capacitor voltage difference. Theoretical analysis is provided to balance the DC link voltage, and it shows that harmonic component compensates the unbalanced condition between the capacitors. Both simulations and experiments are carried out to show that the voltage unbalance have been decreased by the proposed method.

• 산업공학
• /
• 제23권4호
• /
• pp.327-336
• /
• 2010

We consider a supply chain consisting of a make-to-order manufacturer and N component suppliers and study the impacts of the number of suppliers on component inventory management. The manufacturer has full information and continuously observes the state of both component inventory level and customer backorders. Based on this information, the manufacturer determines whether or not to place a component purchasing order to a supplier among N suppliers even though some orders are in process by other suppliers. The goal of this paper is to numerically identify the manufacturer's purchasing policy which minimizes the total supply chain cost and the best choice of N. Our model contributes to the current literature in that the problem of simultaneously considering multiple outstanding orders and incorporating order setup cost into the model has not been covered yet. From numerical experiment, we investigate how much the policy with N suppliers can contribute to reducing the supply cost compared to the policy with a single supplier.

• 천문학회보
• /
• 제36권1호
• /
• pp.30.2-30.2
• /
• 2011

Dust species in the envelopes around AGB stars would have multiple components rather than a single component. Each dust species may have its own temperature and density structure. We use the radiative transfer code RADMC-3D developed by Dullemond et al. 2011 to model the multi-component dust envelopes around O-rich AGB stars. For reasonable combinations of physical and chemical parameters of the dust envelopes, we use multi-component dust species of silicate, corundum, and water ice. We find that the new model results can explain the observations of O-rich AGB stars better than conventional models.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.447-452
• /
• 2015

This paper considers a two-stage make-to-stock production system. The first stage produces a single-component and the second stage produces a make-to-stock product using components. In addition to internal demands, the first stage faces external demands with the option of accepting or rejecting. To ration component inventory, the manufacturer adopts a static rule. This paper analyzes the production controls at both facilities that maximizes the manufacturer's profit. Using the Markov decision process model, we characterize the optimal production policy by two monotonic switching curves.

• Bulletin of the Korean Chemical Society
• /
• 제20권5호
• /
• pp.517-524
• /
• 1999

By heating the magnesiumsilicate (Mg2SiO4:forsterite) xerogel in carbon dioxide, carbonaceous component was intentionally introduced into the amorphous solid precursor. Carbon was introduced homogeneously as unidentate carbonate. Upon being heated at 800 。C in carbon dioxide, the xerogel which had homogeneously distributed carbonaceous component in it crystallized into a single phase product of a new crystalline material, which had approximate composition of Mg8Si4Ol8C. The powder X-ray diffraction pattern of the new crystalline material did not match with any known crystalline compound registered in the powder diffraction file. Crystallization from amorphous xeroget to the new crystalline phase occurred in a very narrow range of temperature, from 750 。C to 850 。C in carbon dioxide, or in dty oxygen. Upon being heated above 850 。C, carbonaceous component was expelled from the product, accompanied by irreversible transition from the new crystalline material to forsterite.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.119-124
• /
• 2003

In this study, retardation behavior of fatigue crack under single overloading of the mixed mode I+II state was experimentally investigated. To produce single overload in the mixed mode I+II state, the compact tension shear (CTS) specimen and loading device were used. The propagation tests for fatigue crack were performed under mode I loading overloading afterwards. We examined the observed deformation aspects, variation of fatigue life and crack propagation rate, and the aspects of retardation behavior from tests. The retardation effect of mixed-mode single overload on fatigue crack propagation behavior was smaller than that of mode I single overload. It has been confirmed that the retardation behavior did not immediately appear and the retardation length was short when the component of mixed-mode overload was changed.

• 천문학회지
• /
• 제51권4호
• /
• pp.73-88
• /
• 2018

We present a sample of 54 disk galaxies which have well developed extraplanar structures. We selected them using visual inspections from the color images of the Sloan Digital Sky Survey. Since the sizes of the extraplanar structures are comparable to the disks, they are considered as prominent stellar halos rather than large bulges. A single $S{\acute{e}}rsic$ profile fitted to the surface brightness along the minor-axis of the disk shows a luminosity excess in the central regions for the majority of sample galaxies. This central excess is considered to be caused by the central bulge component. The mean $S{\acute{e}}rsic$ index of the single component model is $1.1{\pm}0.9$. A double $S{\acute{e}}rsic$ profile model that employs n = 1 for the inner region, and varying n for the outer region, provides a better fit than the single $S{\acute{e}}rsic$ profile model. For a small fraction of galaxies, a $S{\acute{e}}rsic$ profile fitted with n = 4 for the inner region gives similar results. There is a weak tendency of increasing n with increasing luminosity and central velocity dispersion, but there is no dependence on the local background density.

• 대한기계학회논문집B
• /
• 제20권7호
• /
• pp.2409-2420
• /
• 1996

This paper describes the development of a general program for the design and part load performance analysis of single-shaft-heavy-duty gas turbines. Efforts are made to fully represent the real component features by the characteristic models and special emphasis is put on the modeling of cooled turbine stages. The design analysis routine is applied to simulate the performance of current gas turbines and its appropriateness for system analysis is validated. Meanwhile, the component parameters of real engines which describe the technology level are obtained. The program is extended to predicting the part load operation of gas turbines with the aid of models for the off-design characteristics of compressor, turbine and other main components. Part load simulation can be carried out only with limited numbers of input data. It is demonstrated that the program accurately estimates the part load characteristics of real turbines.

• 한국환경과학회지
• /
• 제14권12호
• /
• pp.1195-1201
• /
• 2005

In order to develop a dye coloring technology on Conchiolin layer in cultured pearls, appropriate dyes were selected, their solubilities in various solvents were studied, and adsorption and desorption experiments were performed. Solubilities of several basic dyes known to suitable for the pearl coloring, i.e., Rhodamine 6G(R6), Rhodamine B(RB) and Methylene Blue(MB), in several solvents (distilled water, methanol, ethanol, and acetone) were investigated. Among these dyes, R6 was chosen as a dye for single component adsorption and desorption experiment due to the relatively good solubility in various solvents tested. Solubilities of dyes were judged to be enough to color the pearls since dye concentrations in pearl coloring are, in general, not so high. The internal surface area of the pearl layer is believed to be directly related to the dye adsorption, the single-point internal surface area of the pearl layer measured at the nitrogen relative pressure of 0.3 was found to be $0.913m^2/g$, and the BET internal surface area, $1.01m^2/g$ The most probable diameters of micropores and macropores were found to be $40{\AA}$and $5000{\AA}$ respectively, from the pore size distribution data. Adsorption isotherm was well fitted to the Langmuir isotherm model, resulting in q=$\frac{1.62C}{1+1.09C^{.}}$