• Journal of the Korean Geotechnical Society
• /
• v.31 no.5
• /
• pp.23-33
• /
• 2015

In the present study, a ground heat exchanger was installed for each heat source in the system at the site to evaluate ground heat conductivity, constructability, and economic feasibility; the factors considered in the study included ground heat, groundwater, fillers (such as bentonite and pea pebbles) and the shape of the heat exchange pipe (e.g., U and D-U). The aim was to determine the ground heat exchanger appropriate for the geothermal system in the 3rd-phase construction of Incheon International Airport. A comparative cost analysis of the initial costs based on the above information showed that although the initial costs of the regular vertical closed loop-II and modified vertical closed loop were lower than those of the regular vertical closed loop-I, they could not be expected to deliver high economic efficiency from the viewpoint of constructability (filler injection, heat exchange pipe insertion). The initial costs proved to be higher in the case of Geohil.

• Journal of Society of Preventive Korean Medicine
• /
• v.15 no.1
• /
• pp.37-47
• /
• 2011

Objectives : Previous studies have shown that Fructus mume (FM) has anti-platelet effects. The present study was performed to determine the acute oral toxicity and quality control of a crude extract of FM in ICR mice. Methods : We investigated the in vivo single dose acute toxicity of FM 95% ethanol extract. This test was orally administered once by gavage to 20 male and 20 female mice at dose levels of 0 (control group), 1250, 2500 and 5000mg/kg body weight, respectively. Mortalities, clinical findings, autopsy findings and body weight changes were monitored daily for the 14 days following the administration. HPLC analysis was performed for the simultaneous determination of ursolic acid and p-hydroxycinnamic acid in FM. Reverse-phase chromatography using a C18 column and photodiode array detection at 211 nm was used for quantification of the two maker components. The mobile phase for gradient elution consists of water and acetonitrile. Results : We observed survival rates, general toxicity, change of body weight, and autopsy. The mice did not die after single oral administration of maximum dose of FM. Autopsy of animal revealed no abnormal gross finding. Therefore, $LD_{50}$ value of FM for ICR mice was more than 5000mg/kg on oral route. The HPLC analysis showed that ursolic acid and p-hydroxycinnamic acid amounts to 9.75- and 0.12% in the extract with the retention times of 47.99- and 15.38 minutes, respectively. Conclusions : These results suggest that no toxic dose level of FM in mice is considered to be more than 5000mg/kg. Consequently, it was concluded that FM have no effect on acute toxicity and side effect in ICR mice. For the quality control of FM extract, simultaneous determination of ursolic acid and p-hydroxycinnamic acid was established.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.4
• /
• pp.266-274
• /
• 2024

In this paper, we designed a low-area 32-bit PF (Poly-fuse) OTP IP, a non-volatile memory that stores data required for analog circuit trimming and calibration. Since one OTP cell is constructed using two PFs in one select transistor, a 1cell-2bit multibit PF OTP cell that can program 2bits of data is proposed. The bitcell size of the proposed 1cell-2bit PF OTP cell is 1/2 of 12.69㎛ × 3.48㎛ (=44.161㎛2), reducing the cell area by 33% compared to that of the existing PF OTP cell. In addition, in this paper, a new 1 row × 32 column cell array circuit and core circuit (WL driving circuit, BL driving circuit, BL switch circuit, and DL sense amplifier circuit) are proposed to meet the operation of the proposed multbit cell. The layout size of the 32bit OTP IP using the proposed multibit cell is 238.47㎛ × 156.52㎛ (=0.0373㎛2) is reduced by about 33% compared that of the existing 32bit PF OTP IP using a single bitcell, which is 386.87㎛ × 144.87㎛ (=0.056㎛2). The 32-bit PF OTP IP, designed with 10 years of data retention time in mind, is designed with a minimum programmed PF sensing resistance of 10.5㏀ in the detection read mode and of 5.3 ㏀ in the read mode, respectively, as a result of post-layout simulation of the test chip.

• Nuclear Medicine and Molecular Imaging
• /
• v.43 no.5
• /
• pp.487-494
• /
• 2009

Purpose: Small size of recombinant scFv antibody has many advantages such as rapid blood clearances and improved targeting antibodies to tumor region. On the other hand owing to small size, number of amino group is insufficient in conjugation with chelator and fluorescence labeling. This study is to introduce poly lysine tag to the C-terminal end of scFv lym-1 sequence for fluorescence chelator conjugation. Materials and Methods: Poly lysine scFv lym-1 gene, cloned into pET-22b (+) vector, was expressed in E. coli BL21 (DE3) strain. Antibody purification was performed with Ni-NTA column and then size exclusion column chromatography. Expression and purification levels of poly lysine tagged scFv lym-1 antibody were confirmed by western blot analysis. I-124, I-125, I-131 and Tc-99m were used for radiolabeling of purified poly lysine scFv lym-1. Flow cytometry analysis of FIT( conjugated poly lysine scFv lym-1 was performed for confirmation of immunoreactivity of human Burkitt's lymphoma cells. Results: Poly lysine scFv lym-1 antibody was purified through two steps and identified as molecular weight of 48 KDa. Radiolabeling yields of I-124, I-125, I-131 and Tc-99m into poly lysine scFv lym-1 were >99%, >99%, >95% and >99%, respectively. Flow cytometry analysis of poly lysine scFv and scFv lym-1 was showed similar immunoreactivity to human Burkitt's lymphoma cells. Conclusion: Poly lysine tag was useful for the sufficient number of amino groups to scFv lym-1 antibody for chelator conjugation with minimizing loss of immunoreactivity.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.98-106
• /
• 2009

This work proposes a 1280-RGB $\times$ 800-Dot 70.78mW 0.l3um CMOS LCD driver IC (LDI) for high-performance 16M-color low temperature poly silicon (LTPS) thin film transistor liquid crystal display (TFT-LCD) systems such as ultra mobile PC (UMPC) and mobile applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed LDI optimizes power consumption and chip area at high resolution based on a resistor-string based architecture. The single column driver employing a 1:12 MUX architecture drives 12 channels simultaneously to minimize chip area. The implemented class-AB amplifier achieves a rail-to-rail operation with high gain and low power while minimizing the effect of offset and output deviations for high definition. The supply- and temperature-insensitive current reference is implemented on chip with a small number of MOS transistors. A slew enhancement technique applicable to next-generation source drivers, not implemented on this prototype chip, is proposed to reduce power consumption further. The prototype LDI implemented in a 0.13um CMOS technology demonstrates a measured settling time of source driver amplifiers within 1.016us and 1.072us during high-to-low and low-to-high transitions, respectively. The output voltage of source drivers shows a maximum deviation of 11mV. The LDI with an active die area of $12,203um{\times}1500um$ consumes 70.78mW at 1.5V/5.5V.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.310-315
• /
• 2011

BACKGROUND: Heavy-metal pollution represents an important environmental problem due to the toxic effects of metals, and their accumulation throughout the food chain leads to serious ecological and health problems. METHODS AND RESULTS: Optimum conditions in continuous-flow stirred tank reactor (CSTR) and packedbed column contactor (PBCC) using brown seaweed biosorbent were investigated. Under optimum conditions from both lab-scale biosorbent systems, removal efficiency of copper (Cu) in a large-scale PBCC system was investigated. Removal capacity of Cu using brown seaweed biosorbent in a lab-scale CSTR system was higher than that in a lab-scale PBCC system. On the other hand, over 48 L/day of flow rate in Cu solution, removal efficiency of Cu in a lab-scale PBCC system was higher than that in a lab-scale CSTR system. Optimum flow rate of Cu was 24 L/day, optimum Cu solution concentration was 100 mg/L. Removal capacity of Cu at different stages was higher in the order of double column biosorption system > single column biosorption system. Under different heavy metals, removal capacities of heavy metal were higher in the order of Pb > Cr > Ni > Mn ${\geq}$ Cu ${\geq}$ Cd ${\fallingdotseq}$ Zn ${\geq}$ Co. Removal capacity of Cu was 138 L in a large-scale PBCC system. Removal capacity of Cu a large-scale PBCC system was similar with in a lab-scale PBCC system. CONCLUSION(s): Therefore, PBCC system using brown seaweed biosorbent was suitable for treating heavy metal wastewater.

• Korean Journal of Food Science and Technology
• /
• v.9 no.3
• /
• pp.211-219
• /
• 1977

Dehulled and defatted Korean cottonseed flour was extracted with alkaline solution for 30 minutes and had precipitated the crude portein by adjusting pH $1{\sim}12$. The general composition and the amino acid composition of cottonseed protein were analyzed. Crude protein was purified with sephadex G-100 and G-200, and its component had been identified by disc electrophoresis. Toxic gossypol was removed by n-hexane, acetone and other solvents. The results were as follows. (1) pH 5, pH 7 and pH 4 were the best condition of precipitation of curde protein at single, two step and water extraction, respectively. (2) The cottonseed flour which was dehulled and defatted, contained 61.3% of crude protein. (3) The protein which was isolated from cottonseed flour, contained 20% of glutamic acid, and comparatively high levels of essential amino acids. (4) Dehulled cottonseed flour contained 0.97% of total gossypol and could be romoved 70% of total gossypol by extraction with n-hexane. (5) 10-13 bands of water soluble protein were found in disc electrophoresis, and 10-12 bands in protein were isolated by single and two step procedures. (6) The cottonseed protein could be purified by sephadex G-100 and G-200. (7) 10-20% of gossypol-free cottonseed fluor could be used for animal and human comsumption.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.4
• /
• pp.4-21
• /
• 2016

Until now, most studies regarding stone pagodas of the Honam region have been about stone pagodas with Baekje style because it was the territory of Baekje. However, after reviewing the designated cultural properties, I found that among the 94 stone pagodas in the Honam region there are 15 stone pagodas with Baekje style built in the Goryeo Dynasty and 34 stone pagodas with Silla style. So far, most research efforts have been concentrating on stone pagodas with Baekje style. Through a review of stone pagodas with Silla style, I sought to reveal new aspects of the pagodas in the Honam region. After reviewing the placement of pagodas, I found stone pagodas with Silla style were built mostly in South Jeolla Province during the Unified Silla period. However, in the Goryeo Dynasty stone pagodas with Silla style were erected throughout the Honam region. This shows enhanced Buddhist control over the Honam region than in the previous period. It can be verified especially in Gimje, Jeongeup, Sunchang, Damyang, Yeongam, and Gangjin, where stone pagodas with Baekje style and stone pagodas with Silla style coexist. The types of stone pagodas with Silla style in the Honam region can be divided into two. There are 21 pagodas with two-story foundation, and 12 with single foundation. They seem to have inherited characteristics of the two-story foundation of Silla pagodas. Two pagodas with single foundation were made of a single rock or natural rock for lower foundation. Regarding the body of the pagoda, there are 21 three-story pagodas and 12 five-story pagodas. 25 pagodas have first floors made of a single rock. These are likely to be in the tradition of Silla pagodas. However, the lower part of the roof stones vary as there are three, four, or five-tiered ones. Overall, 12 out of 16 pagodas with middle column in foundation, and 15 out of 21 three-story pagodas are located in South Jeolla Province. This proves that stone pagodas in the South Jeolla Province well maintained the tradition of Silla and became popular.

• The Journal of the Petrological Society of Korea
• /
• v.11 no.2
• /
• pp.74-89
• /
• 2002

Rock units, relating with the Guamsan caldera, are composed of Guamsan Tuff and rhyolitic intrusions. The Guamsan Tuff consists almost entirely of ash-flow tuffs with some volcanic breccias and fallout tuffs. The volcanic breccia comprises block and ash-flow breccias of near-vent facies and caldera-collapse breccia near the ring fracture. The lower ash-flow tuffs are of an expanded pyroclastic flow phase from the pyroclastic flow-forming eruption with an ash-cloud fall phase of the fallout tuffs on the flow units, but the upper ones are of a non-expanded ash-flow phase from the boiling-over eruption. The rhyolitic intrusions are divided into intracaldera intrusions and ring dikes that are subdivided into inner, intermediate and outer dikes. We compile the volcanic processes along a single cycle of cadela development from the eruptive phases in the Guamsan area. The explosive eruptions began with block and ash-flow phases from collapse of glowing lava dome caused by Pelean eruption, progressed through expanded pyroclastic flow phases and ash-cloud fallout phases during high column collapse of pyroclastic flow-forming eruption from a single central vent. This was followed by non-expanded ash-flow phases due to boiling-over eruption from multiple ring fissure vents. The caldera collapse induced the translation into ring-fissure vents from a single central vent in the earlier eruption. After the boiling-over eruption, there followed an effusive phase in which rhyolitic magma was injected and erupted to be progressively emplaced as small plugs/dikes and ring dikes with many lava domes on the surface. Finally rhyodacitic magma was on emplaced as a series of dikes along the junction of both outer and intermediate dikes on the southwestern side of the caldela.

• Korean Journal of Agricultural Science
• /
• v.15 no.2
• /
• pp.153-163
• /
• 1988

This experiment was carried out to obtain the thermophilic fungus producing amylase and to investigate properties of the amylase. The selected strain, L-11 was obtained from soil in the vicinity of a hot spring and identified as Mocor sp.. And then the conditions for enzyme production in wheat bran cultures and properties of the crude enzyme were investigated. Furthermore, the enzyme was purified and the characteristics of purified enzyme were studied. The results obtained were as follows: 1. On the wheat bran medium added 80-100% water, amylase was effectively produced by the selected strain, L-11 for 48 hrs incubation at $50^{\circ}C$. 2. When the crude enzyme solution of the strain L-11 was passed through DEAE-Sephadex A-50 column chromatography, two peaks having amylase activity were obtained, and one peak was that of the main enzyme (enzyme of B peak). 3. The purified enzyme (enzyme of B peak) was recognized as single protein band on polyacrylamide disc gel electrophoresis. 4. In the hydrolysis reaction of soluble starch by the enzyme of main amylase, oligosaccharides produced at early stage were maltose and maltotriose mainly and procedure of the reaction maltose amount of maltose and glucose was increased. 5. The strain L-11 was recognized as a special strain producing ${\alpha}-amylase$ mainly and scarcely glucoamylase. 6. The optimum pH, optimum temperature, pH stability, and temperature stability of ${\alpha}-amylase$ were pH 4.0, $60-65^{\circ}C$, pH 4.0-9.0, and below$70^{\circ}C$.