• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.63-75
• /
• 2015

The CMOS power amplifier (PA) is a promising solution for highly-integrated transmitters in a single chip. However, the implementation of PAs using the CMOS process is a major challenge because of the inferior characteristics of CMOS devices. This paper focuses on improvements to the efficiency and linearity of CMOS PAs for modern wireless communication systems incorporating high peak-to-average ratio signals. Additionally, an envelope tracking supply modulator is applied to the CMOS PA for further performance improvement. The first approach is enhancing the efficiency by waveform engineering. In the second approach, linearization using adaptive bias circuit and harmonic control for wideband signals is performed. In the third approach, a CMOS PA with dynamic auxiliary circuits is employed in an optimized envelope tracking (ET) operation. Using the proposed techniques, a fully integrated CMOS ET PA achieves competitive performance, suitable for employment in a real system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.136-141
• /
• 1996

In this paper, a new CMOS on-chip current reference circit for memory, operational amplifiers, comparators, and data converters is proposed. The reference current is almost independent of temeprature and power-supply variations. In the proposed circuit, the current component with a positive temeprature coefficient cancels that with a negative temperature coefficient each other. While conventional curretn and voltage reference circuits require BiCMOS or bipolar process, the presented circuit can be integrated on a single chip with other digiral and analog circits using a standard CMOS process and an extra mask is not needed. The prototype is fabricated employing th esamsung 1.0um p-well double-poly double-metal CMOS process and the chip area is 300um${\times}$135 um. The proposed reference current circuit shows the temperature coefficient of 380 ppm/.deg. C with the temperature changes form 30$^{\circ}C$ to 80$^{\circ}C$, and the output variation of $\pm$ 1.4% with the supply voltage changes from 4.5 V to 5.5 V.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.345-350
• /
• 2014

DC electrolytic capacitor is widely used in the power converter including PWM inverter, switching power supply and PFC Boost converter system because of its large capacitance, small size and low cost. In this paper, basic characteristics of DC electrolytic capacitor vs. frequency is presented and the real-time estimation scheme of ESR and capacitance based on the bandpass filtering is adopted to the single phase boost converter of uninterruptible power supply to diagnose its split dc-link capacitors. The feasibility of this real-time failure prediction monitoring system is verified by the computer simulation of the 5[kW] singe phase PFC half-bridge boost converter.

• IE interfaces
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2011

The traveling purchaser problem (TPP) is a generalization of the well-known traveling salesman problem (TSP), which has many real-world applications such as purchasing the required raw materials for the manufacturing factories and the scheduling of a set of jobs over some machines, and many others. In the last decade, TPP has received some attention of the researchers in the operational research area. However, all of the past researches for TPP are restricted on a single purchaser (vehicle). It could be the limitation to solve the real world problem. The purpose of this paper is to suggest the capacitated multiple TPP (CMTPP). It could be used in inbound logistics optimization in supply chain management area and many others. Since TPP is known as NP-hard, we also developed the heuristic algorithm to solve the CMTPP.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.253-254
• /
• 2014

본 논문에서는 무정전전원장치(UPS : Uninterruptible Power Supply 이하 UPS)에서 사용되는 단상인버터의 전압 제어기의 낮은 대역폭으로 인하여 발생될 수 있는 전압 위상 지연 문제를 해결한다. 제안하는 방법은 전압 명령에 대한 전향보상을 이용한 새로운 전압 제어기를 제안하고 이를 MATLAB Simulink를 사용한 시뮬레이션을 통하여 효과를 입증하였다.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.304-307
• /
• 1998

High speed railway is under construction from Seoul to Pusan. A traveling train is large single phase load that consumes 14MW power in feeding system of high speed railroad. In this paper, measurement scheme and method of power system harmonics which are generated from those loads in railroad supply system are described. This measurement scheme will be used as a first step to pave a way to power quality management due to harmonic distortion by the highspeed rail way.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.890-893
• /
• 2003

In this paper, we have designed the fractional-N frequency synthesizer for bluetooth system using 0.35-um CMOS technology and 3.3-V single power supply. The designed synthesizer consist of phase-frequency detector (PFD), charge pump, loop filter, voltage controlled oscillator (VCO), frequency divider, and sigma-delta modulator. A dead zone free PFD is used and a modified charge pump having active cascode transistors is used. A Multi-modulus prescaler having CML D flip-flop is used and VCO having a tuning range from 746 MHz to 2.632 GHz at 3.3 V power supply is used. Total power dissipation is 32 mW and phase noise is -118 dBc/Hz at 1 MHz offset.

• Journal of Chest Surgery
• /
• v.56 no.5
• /
• pp.362-366
• /
• 2023

The stomach has become the most commonly used site for grafts to replace the esophagus in esophageal cancer surgery because of its good blood supply and ability to enable single-reconstruction anastomosis. However, anastomotic failure is a serious complication after esophageal cancer surgery. Unlike anastomotic leakage due to local ischemia, gastric tube necrosis is a life-threatening condition with a high mortality rate. Gastric tube necrosis involves extensive ischemia due to a decreased blood supply, and an urgent operation is mandatory in most cases. Endoscopic vacuum therapy (EVT) has been used for anastomotic leakage after esophageal surgery. In recent years, it has been successfully used for more extensive disease, including large esophageal perforation as an indication for reoperation. Hence, we report a case of extensive gastric tube necrosis treated by EVT after an Ivor Lewis operation.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1196-1198
• /
• 2002

A novel single-stage half-bridge high frequency resonant inverter using ZVS(Zero Voltage Switching) with high input power factor suitable for induction heating applications is presented in this paper. The proposed high frequency resonant inverter integrates half-bridge boost rectifier as power factor corrector(PFC) and half-bridge resonant inverter into a single stage. The input stage of the half-bridge boost rectifier is working in discontinuous conduction mode (DCM) with constant duty cycle and variable switching frequency. So that a high power factor is achieved naturally. Simulation results through the Pspice have demonstrated the feasibility of the proposed inverter. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, DC-DC converter etc.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.654-663
• /
• 2012

In this paper, a digital control strategy based on equivalent fundamental and odd harmonic resonators is proposed for single-phase DVRs. By using a delay block, which can be equivalent to a bank of resonators, it rejects the fundamental and odd harmonic disturbances effectively. The structure of the single closed-loop control system consists of a delay block, a proportional gain and a set of zero phase notch filters. The principle of the controller design is discussed in detail to ensure the stability of the system. Both the supply voltage and the load current feedforwards are used to improve the response speed and the ability to eliminate disturbances. The proposed controller is simple in terms of its structure and implementation. It has good performances in harmonic compensation and dynamic response. Experimental results from a 2kW DVR prototype confirm the validity of the design procedure and the effectiveness of the control strategy.