• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.570-576
• /
• 2004

In this paper, we design the IFFT/FFT (Inverse fast Fourier Transform/Fast Fourier Transform) modules for IEEE 802.11a-1999, which is a standard of the High-speed Wireless LAN using the OFDM (Orthogonal Frequency Division Multiplexing). The designed IFFT/FFT is the 64-point FFT to be compatible with IEEE 802.11a and the pipelined architecture which needs neither serial-to-parallel nor parallel-to-serial converter. We compare four types of IFFT/FFT modules for the hardware complexity and operation : R22SDF (Radix-2 Single-path Delay feedback), the R2SDF (Radix-2 Single-path Delay feedback), R2SDF (Radix-4 Single-path Delay Feedback), and R4SDC (Radix-4 Single-path Delay Commutator). In order to minimize the error, we design the IFFT/FFT module to operate with additional decimal parts after butterfly operation. In case of the R22SDF, the IFFT/FFT module has 44,747 gate counts excluding RAMs and the minimized error rate as compared with other types. And we know that the R22SDF has a small hardware structure as compared with other types.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.105-112
• /
• 1998

In this paper, we propose a ESP(Extended Scan Path) architecture for multi-board testing. The conventional architectures for board testing are single scan path and multi-scan path. In the single scan path architecture, the scan path for test data is just one chain. If the scan path is faulty due to short or open, the test data is not valid. In the multi-scan path architecture, there are additional signals in multi-board testing. So conventional architectures are not adopted to multi-board testing. In the case of the ESP architecture, even though scan path is either short or open, it doesn't affect remaining other scan paths. As a result of executing parallel BIST and IEEE 1149.1 boundary scan test by using the proposed ESP architecture, we observed that the test time is short compared with the single scan path architecture. By comparing the ESP architecture with single scan path responding to independency of scan path, test time and with multi-scan path responding to signal, synchronization, we showed that the architecture has improved results.

• Journal of Korea Multimedia Society
• /
• v.8 no.6
• /
• pp.729-734
• /
• 2005

In order to access XML data stored in object databases, an efficient index scheme is inevitable. There have been several index schemes that can be used to efficiently retrieve XML data stored In object databases, but they are all the single path indexes that support indexing along a single schema path. Henee, if a query contains an extended path which is denoted by wild character ('*'), a query processor has to examine multiple index objects, resulting in poor performance and inconsistent index management. In this paper, we propose MPI (Multi-Path Index) scheme as a new index scheme that provides the functionality of multiple path indexes more efficiently, while it uses only one index structure. The proposed scheme is easy to manage since it considers the extended path as a logically single schema path. It is also practical since it can be implemented by little modification of the B -tree index structure.

• Journal of KIISE:Computing Practices and Letters
• /
• v.7 no.1
• /
• pp.12-23
• /
• 2001

Extended path expressions are used to denote multiple paths concisely by using '$\ast$' character. They are convenient for expressing OQL queries to retrieve XML data stored in OODBs. In this paper, we propose a multi-path index scheme as a new index scheme to efficiently process queries with extended path expressions. Our proposed index scheme allocates a unique path identifier for every possible single path in an extended path expression and provides functionalities of both a single path indexing and multiple path indexing through the composition of index key and path identifier while using only a index structure. The proposed index scheme provides better performance than single-path index schemes, and is practical since it can be implemented by little modification of leaf records of a B+-tree index.

• Journal of Multimedia Information System
• /
• v.8 no.4
• /
• pp.203-210
• /
• 2021

Deep leaning convolutional neural networks (CNN) have successfully been applied to image super-resolution (SR). Despite their great performances, SR techniques tend to focus on a certain upscale factor when training a particular model. Algorithms for single model multi-scale networks can easily be constructed if images are upscaled prior to input, but sub-pixel convolution upsampling works differently for each scale factor. Recent SR methods employ multi-scale and multi-path learning as a solution. However, this causes unshared parameters and unbalanced parameter distribution across various scale factors. We present a multi-scale single-path upsample module as a solution by exploiting the advantages of sub-pixel convolution and interpolation algorithms. The proposed model employs sub-pixel convolution for the highest scale factor among the learning upscale factors, and then utilize 1-dimension interpolation, compressing the learned features on the channel axis to match the desired output image size. Experiments are performed for the single-path upsample module, and compared to the multi-path upsample module. Based on the experimental results, the proposed algorithm reduces the upsample module's parameters by 24% and presents slightly to better performance compared to the previous algorithm.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.199-201
• /
• 2003

Ad hoc network은 stationary infrastructure의 도움 없이 이동 노드들이 필요 시 network 형태을 구성하여 통신이 이루어지게 하는 network으로 ad hoc network 환경에 맞는 다양한 라우팅 프로토콜들이 개발되었고 크게는 table­driven, on­demand 방식으로 나눌 수 있는데 on­demand 방식의 AODV 프로토콜은 routing overhead가 적다는 장점이 있는 반면 single path로 data forwarding을 진행하여 중간노드의 이동에 의한 path가 broken되는 경우 local routing을 하거나 새로이 source­initialed route rediscovery을 수행하여 전송 delay 및 control traffic overhead 등을 높이는 결과를 발생 시켰다. 본 논문은 single path로 구성되는 AODV 프로토콜의 route failures시 문제점을 보완한 Associativity Based Redundancy path Routing(ABRR) 및 Alternate Redundancy path Routing(ARR) schemes을 제안한다. 첫째, ABRR은 main path상에 있는 각 노드들은 associativity based stable node 정보를 이용하여 path broken 이전에 local redundancy path을 구성하여 path broken시 local routing없이 route을 복구할 수 있게 하고 둘째, ARR은 source­initialed route discovery에 의해 alternate path을 구성하여 ABRR 그리고 local routing에 의해 main route recovery 실패 시 alternate path을 main path로 전환하여 control traffic overhead 및 전송 delay을 줄이게 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1048-1055
• /
• 2005

The formula to calculate a variation of optical path length of single crystal by the electric field was derived by this study. The formula was applied to $Bi_{12}SiO_{20}$ single crystal. The results are as follows. In case of the applied electric field in the body diagonal direction and the passing light along the same direction, the variation of optical path length had the largest value. The symmetry of the space distribution of optical path length satisfied $E3C_2\;8C_3$, the set of elements of the symmetry of $Bi_{12}SiO_{20}$ single crystal. The property which gave the largest influence to the variation of optical path length is the strain of length by the Inverse piezoelectric effect. The second influence, is the variation of the refractive index by the electro-optic effect. The variation of optical path length by the inverse piezoelectric effect and by the electro-optic effect have a reverse sign each other.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.434-442
• /
• 2012

Several gateway selection schemes have been proposed that select gateway nodes based on a single Quality of Service (QoS) path parameter, for instance path availability period, link capacity or end-to-end delay, etc. or on multiple non-QoS parameters, for instance the combination of gateway node speed, residual energy, and number of hops, for Mobile Ad hoc NETworks (MANETs). Each scheme just focuses on the ment of improve only a single network performance, i.e., network throughput, packet delivery ratio, end-to-end delay, or packet drop ratio. However, none of these schemes improves the overall network performance because they focus on a single QoS path parameter or on set of non-QoS parameters. To improve the overall network performance, it is necessary to select a gateway with stable path, a path with themaximum residual load capacity and the minimum latency. In this paper, we propose a gateway selection scheme that considers multiple QoS path parameters such as path availability period, available capacity and latency, to select a potential gateway node. We improve the path availability computation accuracy, we introduce a feedback system to updated path dynamics to the traffic source node and we propose an efficient method to propagate QoS parameters in our scheme. Computer simulations show that our gateway selection scheme improves throughput and packet delivery ratio with less per node energy consumption. It also improves the end-to-end delay compared to single QoS path parameter gateway selection schemes. In addition, we simulate the proposed scheme by considering weighting factors to gateway selection parameters and results show that the weighting factors improve the throughput and end-to-end delay compared to the conventional schemes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.5
• /
• pp.379-387
• /
• 2019

The complexity of path planning for visiting multiple mission points is even larger than that of single pair path planning. Deciding a path for visiting n mission points requires conducting $n^2+n$ times of single pair path planning. We propose Multiple Mission $D^*$ Lite($MMD^*L$) which is an optimal path planning algorithm for visiting multiple mission points in dynamic environments. $MMD^*L$ reduces the complexity by reusing the computational data of preceding single pair path planning. Simulation results show that the complexity reduction is significant while its path optimality is not compromised.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.5
• /
• pp.89-98
• /
• 2014

This paper suggests heuristic algorithm for single-model simple assembly line balancing problem that is a kind of NP-hard problem. This problem primarily can be solved metaheuristic method. This heuristic algorithm set the main-path that has a most number of operations from start to end-product. Then the clustering algorithm can be assigns operations to each workstation within cycle time follow main-path. This algorithm decides minimum number of workstations and can be reduces the cycle time. This algorithm can be better performance then metaheuristic methods.