• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.505-510
• /
• 2001

We simulated the current limiting characteristics of a resistive superconducting fault current limiter (SFCL) for a single line-to-ground fault in the 22.9 kV system. The transient current during the fault increased to 6.33 kA, 5.80 kA and 3.71 kA without SFCL at the fault angles 0$^{\circ}$, 45$^{\circ}$ and 90$^{\circ}$, respectively, a resistive SFCL limited effectively the fault current to 2.27 kA in a half cycle without any DC components. The maximum quench resistance of an SFCL, 16Ω was suggested to be appropriate to limit the fault current in the 22.9 kV distribution system, considering the operating cooperation of a protective relay and the current limiting performance of an SFCL.

• 한국전기전자재료학회논문지
• /
• 제31권2호
• /
• pp.90-93
• /
• 2018

This aim of this study was to develop a process for creating bulk single-crystal YBaCuO superconductors in a high magnetic field. To support the bulk unidirectional growth of $YBa_2Cu_3O_{7-y}$, $SmBa_2Cu_3O_{7-y}$ seeds were planted inside YBaCuO composites and samples were produced by melting, enabling the growth of two YBaCuO superconductors. Due to the magnetism generated inside the superconductor of the upper sample, the magnetization inside the superconducting single crystals was evenly distributed, the sharpness of the induced magnetic force was improved, and the superconducting magnetization were significantly improved. This approach is widely applicable for the production of superconducting wires and current leads used for DC power breakers.

• Structural Engineering and Mechanics
• /
• 제63권4호
• /
• pp.439-446
• /
• 2017

This work proposes an original single variable shear deformation theory to study the buckling analysis of thick isotropic plates subjected to uniaxial and biaxial in-plane loads. This theory is built upon the classical plate theory (CPT) including the exponential function in terms of thickness coordinate to represent shear deformation effect and it involves only one governing differential equation. Efficacy of the present theory is confirmed through illustrative numerical examples. The obtained results are compared with those of other higher-order shear deformation plate theory results.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.442-446
• /
• 1998

$\alpha$--sulfur single crystal which has orthorohmbic structure was grown using Bridgman method. The indirect optical energy band gap of this crystal are 2.65 and 2.82 eV at 10 and 300K, respectively. The wavelengths of photoluminecence(PL) peaks are 543 and 596 nm at 10k, By thermally stimulated current (TSC) method, two electron traps($D_1,D_2$) located at 0/23 and 0.43eV below the conduction band and a hole trap(A) located at 0.31 eV above the valence band are observed. PL mechanism of $\alpha$-sulfur single crystal is analyzed using the values of optical energy band gap at 10k two electron traps and a hole trap.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.364-365
• /
• 2006

Transverse some wave was generated by T type waveguide for single wafer cleaning application T type megasonic waveguide was analyzed by acoustic pressure measurements and particle removal efficiency. Compared to conventional longitudinal waves, not like longitudinal waves, transverse waves showed changes of direction and phase which increased the cleaning efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.6-6
• /
• 2010

This paper describes that single crystal cubic silicon (3C-SiC) films have been deposited on carbonized Si(100) substrate using hexamethyldisilane(HMDS, $Si_2(CH_3)_6$) as a safe organosilane single-source precursor and a nonflammable mixture of Ar and $H_2$ gas as the carrier gas by APCVD at $1280^{\circ}C$. The 3C-SiC film had a very good crystal quality without defects due to viods, a very low residual stress.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.20-20
• /
• 2010

We present a simple process for the fabrication of high performance transparent conducting films that contain single-walled carbon nanotubes (SWCNTs) noncovalently coated with an ultrathin titania layer. The hydrophobic interactions between nanotube surfaces and the acetylacetone (acac) ligands used to stabilize the $TiO_2$ precursor provide an interesting alternative method for noncovalently coating the SWCNTs with a titania layer. The ultrathin titania layer on SWCNTs prevented the oxidation of functionalized SWCNTs at high temperatures, and protected against water molecule absorption.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.277-277
• /
• 2010

We present facile chemical route stabilizing dispersion of carboxylated single-Walled carbon nanotubes (SWCNTs) in ZnOsol prepared by using diethanolamine as a stabilizer. The dispersion was stabilized via capping of carboxyl groups on the SWCNT surface by a titania layer. We also demonstrated that the conductivity of the films prepared P3/$TiO_2$/ZnO as enhanced by therml treatment, and the thermal stbility of the film improved hybridization with ZnO sol pristine P3, P3/$SiO_2$ and P3/$TiO_2$ hybrid films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.279-279
• /
• 2010

We present a simple process for the fabrication of high performance transparent conducting films that contain single-walled carbon nanotubes (SWCNTs) noncovalently coated with an ultrathin titania layer. The hydrophobic interactions between nanotube surfaces and the acetylacetone (acac) ligands used to stabilize the $TiO_2$ precursor provide an interesting alternative method for noncovalently coating the SWCNTs with a titania layer. The ultrathin titania layer on SWCNTs prevented the oxidation of functionalized SWCNTs at high temperatures, and protected against water molecule absorption.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.41-41
• /
• 2010

We present facile chemical route stabilizing dispersion of carboxylated single-walled carbon nanotubes (SWCNTs) in ZnOsol prepared by using diethanolamine as a stabilizer. The dispersion was stabilized via capping of carboxyl groups on the SWCNT surface by a titania layer. We also demonstrated that the conductivity of the films prepared P3/$TiO_2$/ZnO as enhanced by therml treatment, and thethermal stbility of the film improved hybridization with ZnO sol pristine P3, P3/$SiO_2$ and P3/$TiO_2$ hybrid films.