• 한국안전학회지
• /
• 제8권1호
• /
• pp.59-63
• /
• 1993

It is very difficult to find not only optimized welding condition but also fatigue characteristics of the dissimilar weld. In this study. Low carbon steel (SS41) and austenitic stainless steel (STS304) were welded by GTAW welding with STS309 stainless wire rod and Single Edge Notch specimens were used for the examination of fatigue behavior on welding heat cycle. The fatigue crack growth rate in HAZ of SS41 was the highest. The second was in STS304 bond line and the lowest was in HAS of STS304.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.137-138
• /
• 2017

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.621-630
• /
• 2016

In this paper, a single current sensor technique (SCST) is proposed for single-phase full-bridge inverters. The proposed SCST measures the currents of multiple branches at the same time, and reconstructs the average inductor, capacitor, and load current in a single switching cycle. Since all of the branches' current in the LC filter and the load are obtained using the SCST, both the inductor and the capacitor current feedback schemes can be selectively applied while taking advantages of each other. This paper also analyzes both of the current feedback schemes from the view point of the closed-loop output impedance. The proposed SCST and the analysis in this paper are verified through experiments on a 3kVA single-phase uninterruptible power supply (UPS).

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1164-1172
• /
• 1999

In this study, to investigate the fatigue crack retardation behavior and the variability of retardation cycles, fatigue crack growth tests were conducted on 7075-T6 aluminum alloy under single tensile overload. A retardation coefficient, D was introduced to describe fatigue crack retardation behavior and a random variable, Z to describe the variability of fatigue crack growth. The retardation coefficient was separately formulated according to retardation behavior which is composed of delayed retardation part and retardation part. The random variable, Z was evaluated from experimental data which was obtained from fatigue crack growth tests under constant amplitude load. Using these variables, a probabilistic model was developed on the basis of the modified Forman's equation, and retardation behavior and cycles were predicted under certain overload condition. The predicted retardation curve well agrees with the trend of experimental crack retardation behavior. And this model well predicts the scatter of experimental retardation cycles.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.32-37
• /
• 2011

In dispersion management (DM) and optical phase conjugation applied into optical transmission links with multi fiber spans for minimizing the impact of nonlinearity and group velocity (GVD), implementation possibility of DM using only one fiber span for pre- or postcompensation was assessed as a function of duty cycle of RZ pulse and residual dispersion per span (RDPS). It is confirmed that DM with optimal net residual dispersion (NRD) controlled by only one fiber span could be sufficiently applied into optical transmission links, though optimal NRD is more increased than that in transmission links with the general DM scheme of pre- and postcompensation. Thus, it is expected that optical transmission system is simply designed and implemented by applying the proposed DM scheme into real optical transmission links. Also, it is confirmed that the advantageous duty cycle of RZ is 0.5 and RDPS is setting to be small value for the effective transmitting wide signal wavelength range in optical links with optimal NRD controlled by only one fiber span.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2018년도 전력전자학술대회
• /
• pp.198-200
• /
• 2018

In this paper a single-stage single-phase differential type isolated AC-DC converter is proposed. This converter eliminates the requirement to use bulky electrolytic capacitor from the system and at the same time provides DC charging by employing the AC Power Decoupling waveform control method. All the switches of the converter achieve ZVS turn on during half line cycle and all diodes achieve ZCS turn off during entire line cycle. A conventional controller is implemented for PFC control and output regulation, whereas a power decoupling controller is added to compensate $2^{nd}$ harmonic ripple power. In addition, an interleaving technique is applied to increase the power range of the converter and reduce the input inductor size. In the end simulation verification is performed and results are obtained for 6.6KW.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.780-783
• /
• 2010

단일 모드 광섬유 (SMF; single mode fiber)로 구성된 960 km의 전체 전송 링크에 축적된 분산을 보상하기 위해 inline 분산 제어 (DM; dispersion management)이 적용된 경우에 precompensation만의 조절로 24개의 각기 다른 파장을 갖는 RZ 형식의 신호를 양호하게 전송할 수 있는 전체 잉여 분산량 (NRD; net residual dispersion)을 RZ 형식의 충격 계수와 전송 링크의 중계 거리 당 잉여 분산량 (RDPS; residual dispersion per span)에 따라 도출하였다. 전송 링크의 RDPS가 적을수록 24개 파장 모두의 유효 NRD 범위를 늘릴 수 있고, 동일한 RDPS에서는 RZ 형식의 충격 계수가 증가될수록 유효 NRD 범위가 증가되는 것을 확인하였다.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.384-390
• /
• 2022

In this study, a single-stage, four-phase, interleaved, totem-pole AC-DC converter is proposed for a super-fast charger station that requires high power, a wide voltage range, and bidirectional operation capabilities and adopts various types of electric transport vehicles. The proposed topology is based on current-fed push-pull dual active bridge converter combined with the totem-pole operation. Owing to the four-phase interleaving effect, the bridge on the grid side can switch at 0.25, 0.5, and 0.75 to achieve a ripple-free grid current. The input filter can be removed theoretically. Switching methods for the duty of the secondary-side duty cycle are proposed, and they correspond to the primary duty cycle for reducing the circulating power and handling the total harmonic distortion. Therefore, the converter can operate under a wide voltage range. Experimental results from a 7.5 kW prototype are used to validate the proposed concept.

• 한국산업정보학회논문지
• /
• 제18권5호
• /
• pp.51-58
• /
• 2013

본 논문에서는 고속 SoC 설계시 필요한 클록킹 회로의 핵심 소자인 클록 듀티 보정회로 (Duty-Cycle Corrector: DCC)를 소개한다. 종래의 아날로그 피드백 DCC와 디지털 피드백 DCC의 구조와 동작에 대해 비교 분석한다. 듀티-보정 레인지의 확장과 동작 주파수 및 듀티-보정 정확도의 향상을 위해 아날로그와 디지털 DCC의 장점을 결합한 새로운 혼성-모드 피드백 DCC를 소개한다. 특히, 혼성-모드 DCC의 핵심 구성 회로인 듀티-앰프 (Duty-Cycle Amplifier: DCA)의 구조와 설계에 대해 자세히 소개한다. 싱글-스테이지 DCA와 투-스테이지 DCA 기반의 두 개의 혼성-모드 DCC가 각각 0.18-${\mu}m$ CMOS 공정으로 설계되었고, 투-스테이지 DCA기반 DCC가 더 넓은 듀티-보정 레인지와 더 적은 듀티-보정 에러를 갖고 있음을 증명하였다.

• 한국인터넷방송통신학회논문지
• /
• 제22권6호
• /
• pp.91-97
• /
• 2022

사이클 검출 문제에 대해, 단일 출발(SS)을 갖는 단일 연결 리스트(SLL)에 한해 O(n) 복잡도의 거북이와 토끼 경주법(HTA)이 제안되었으며, 다중 출발지-다중 종착지, 다중 분기(MSMDMB)를 갖는 일반 그래프에 대해서는 빠른 방법이 알려져 있지 않고 있다. 본 논문에서는 MSMDMB를 갖는 주어진 무 방향과 방향 그래프의 최대 사이클을 선형시간 복잡도로 검출할 수 있는 방법을 제안하였다. 제안된 방법은 주어진 원 그래프 G에는 사이클 형성 조건을 충족시키지 못하는 다수의 정점(또는 노드)가 존재한다는 사실에 기반하여 이들 정점(또는 노드)들을 제거한 축소된 그래프 G'를 얻었다. 이 축소된 그래프에 대해 선형시간 복잡도인 선형탐색으로 사이클 집합 C와 사이클 길이 λ를 찾았다. 제안된 알고리즘을 실험 데이터에 적용한 결과 모든 데이터들에 대해 최대 사이클을 찾을 수 있음을 보였다.