• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권2호
• /
• pp.8-18
• /
• 2001

The direct simulation Monte Carlo Method is applied to investigate the two-dimensional flow fields of a turbomolecular pump(TMP) in both molecular and transition flow regions. The pumping characteristics of the TMP are investigated for a wide range of the Knudsen number. The maximum of compression ratio and of pumping speed strongly depend on the Knudsen number in transition region, while they weakly depend on the Knudsen number in free molecular flow region. The present numerical results show good agreement with the previously known experimental data. Finally. the results of the single blade row in both molecular and transition regions are used to predict the overall performance of a TMP, which has three kinds of blade with 24-rows.

• 대한조선학회논문집
• /
• 제41권2호
• /
• pp.33-46
• /
• 2004

The cavitating noise of underwater propeller is considered numerically in this study. The main purpose of this research is to analyze these noise sources from marine propeller. The approach for investigation is a potential based panel method coupled with acoustic analogy. To predict propeller sheet cavitation noise, the blade surface cavity is considered as a single valued pulsating volume of vapor attached to the blade surface. The time dependent cavity volume data are used for noise prediction. Furthermore, we analyze hydrofoil cavitation bubble behavior and noise using Eulerian/Lagrangian approach. Through this study, we can analyze dominant noise source of marine propeller and provide a basis for proper noise control strategies.

• 동력기계공학회지
• /
• 제2권1호
• /
• pp.39-44
• /
• 1998

Computational grids used in the numerical simulation of multi staged turbomachinery flow fields are generated. A multiblock structure simplifies the creation of structured H-grids about complex turbomachinery geometries and facilitate the creation of a grid for multi-row topologies. The numerical algorithm adopts the combination of the algebraic and elliptic method to create the internal grids efficiently and quickly. The input module is made of the results of the preliminary design, i.e., flow-path, aerodynamic conditions along the spanwise direction, and the blade profile data. The final grids generated from each module of the system are used as the preprocessor for the performance prediction of the single row cascades and the flow simulation inside the multi staegd blade passage. Application to low pressure compressor of industrial gas turbine engines was demonstrated to be very reliable and practical in support of design activities.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.83-94
• /
• 2000

The performance of a turbomolecular pump(TMP) in both molecular and transition flow regions is predicted by the numerical solutions of the Boltzmann equation obtained by the direct simulation Monte Carlo method. The compression characteristics of the TMP are investigated for a wide range of the Knudsen number( Kn ). The maximum compression ratios strongly depend on Kn in transition region, while do they weakly on Kn in free molecular flow region. The present numerical results of the single blade row in both molecular and transition regions are used to predict the overall performance of a TMP, which has three kinds of blade with 24-rows.

• 한국소음진동공학회논문집
• /
• 제20권1호
• /
• pp.29-35
• /
• 2010

This paper studies causes of the L-1 blade damage of a low pressure turbine, which was found during the scheduled maintenance, in 500 MW fossil power plants. Many failures of turbine blades are caused by the coupling of aerodynamic forcing with bladed-disk vibration characteristics. In this study the coupled vibration characteristics of the L-1 turbine bladed-disk in a fossil power plant is shown for the purpose of identifying the root cause of the damage and confirming equipment integrity. First, analytic and experimental modal analysis for the bladed-disk at zero rpm as well as a single blade were performed and analyzed in order to verify the finite element model, and then steady stresses, natural frequencies and corresponding mode shapes, dynamic stresses were calculated for the bladed-disk under operation. Centrifugal force and steady steam force were considered in calculation of steady and dynamic stress. The proximity of modes to sources of excitation was assessed by means of an interference diagram to examine resonances. In addition, fatigue analysis was done for the dangerous modes of operation by a local strain approach. It is expected that these dynamic characteristics will be used effectively to identify the root causes of blade failures and to perform prompt maintenance.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.111-117
• /
• 2017

본 논문에서는 유한요소 자유진동해석을 수행하여 박판 보에서의 국소변형효과를 조사하였다. 자유진동해석은 단일셀 및 다중셀 박스보에 대해 수행하였으며, 풍력발전 블레이드를 가장 단순하게 모사할 수 있는 단일셀 박스보를 먼저 해석하였다. 쉘요소 해석결과를 보요소 해석결과와 비교하여 보았을 때 박스 보의 박판 두께가 정확도에 매우 중요한 역할을 함을 확인하였다. 두께가 얇은 경우에는 쉘의 국소변형(또는 쉘 모드)가 주요하게 나타난 반면에 두꺼울 경우에는 전단변형의 효과가 크게 나타남을 알 수 있었다. 목이 있는 단일셀 박스보에서의 국소변형은 목 주위에 집중되어 나타남을 확인하였다. 마지막으로 실제 블레이드와 유사한 다중셀 테이퍼 보의 주파수 및 모드형상을 분석하였다. 보 요소 해석결과는 쉘 요소 결과와 비교하여 약 5~7% 주파수 차이를 보였으며, 이는 보요소가 국소변형을 제대로 모사하지 못하기 때문이다. 특히 래그모드(lagwise mode)의 경우에는 단면의 분할 정도의 영향보다 국소변형의 효과가 매우 크다는 것을 알 수 있었다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.32-38
• /
• 2003

An analytical model of the interference phenomena in the centerless grinding process is developed to investigate their effects on the roundness profile of a centerless ground workpiece. In this work, the regulating wheel and work-rest blade interferences are modeled as a single point contact. The grinding wheel interference is modeled as multiple points contact because material removal is determined by the duration of contact. The computer simulation results show good agreement with the experimental data. From this work, the existence and effects of the interference phenomena in the centerless grinding process are found.

• 대한물리치료과학회지
• /
• 제26권1호
• /
• pp.22-34
• /
• 2019

Purpose: The purpose of this study was to investigate the effects of body blade and Thera band exercise on upper extremity strength, grip strength and balance of university students. Design: Single Blind Randomized Controlled Trial. Method: twenty healthy adults, participated in this study, and were recruited by G University in Gimcheon Korea. The subjects were randomly divided into A group that went through Thera band exercise and B group that went through Body blade exercise. Each group had 10 subjects. All subjects did the experiment for 3 times a week for 3weeks. Spss was used for statistical analysis. Result: 1) Grip strength: After exercising, for the BE group, there were statistically significant differences in dominant and non-dominant hand. However, for the TE group, there were no significant statistical differences in both hands. 2) muscle strength: In the TE group there were no significant statistical differences in the dominant and non-dominant arm. But in the BE group there were differences which were found. 3) balance: After exercising, both groups had no significant statistical difference in medial lateral balance. In anterior and posterior balance, TE group had no statistical significant difference but BE group did. Conclusion: To improve muscle strength balance and grip strength, body blade exercise is more effective than Thera band exercise.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.349-354
• /
• 2005

본 연구에서는 초음속 충동형 터빈의 유동특성을 알아보기 위해 소형 초음속 풍동을 설계하였으며 Single pass Schlieren system을 이용하여 유동을 가시화하였다. 실험은 2차원 초음속 노즐과 익렬을 조합하여 블레이드 앞전 형상과 노즐-익렬 간극에 따라 실시하였다. 실험을 통해 충격파를 포함한 복잡한 유동 형태와 노즐-익렬, 충격파-경계층 상호작용 등을 관찰할 수 있었다.

• 한국자동차공학회논문집
• /
• 제12권3호
• /
• pp.27-36
• /
• 2004

A Numerical analysis has been used to predict the performance in the automotive water pump with double discharge single suction. The influence of parameters such as coolant flow rate, rotational speed, ratio of blade height and clearance has been investigated. Also, the prediction of hydraulic performances such as static pressure rise, shaft power, hydraulic power and pump efficiency is carried out on the water pump including an impeller and a volute casing. A full size water pump test bench has been developed to validate the CFD flow model. Discharge flow rate, suction pressure, discharge pressure, rotational speed and torque measurements are provided. Coolant temperature is 8$0^{\circ}C$, water tank pressure is 1 kgf/$\textrm{cm}^2$ and flow rates vary.