• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.222-230
• /
• 2003

Artificial intelligence has been used in the configuration design stage of high-speed train. The traction system of a high-speed train is composed of transformers, motor blocks, and traction motors of which locations and number in the trainset should be determined in the early stage of the train conceptual design. Components of the traction system are heavy parts in the train, so it gives strong influence to the top speeds and overall train configuration of high-speed trains. Top speeds have been predicted using the neural network with the associated data of the traction system. The neural networks have been learned with data sets of many commercially operated high-speed trains, and the predicted results have been compared with the actual values. The configuration design of the train set of a high-speed train determines the basic specification of the train and layout of the traction system. The neural networks is a useful design tool when there is not sufficient data for the configuration design and we need to use the existing data of other train for the prediction of trainset in development.

• 소음진동
• /
• 제9권1호
• /
• pp.174-183
• /
• 1999

An analytical model for the lateral vibration of beams with a bonded lap joint and partial layered dampers has been proposed in this paper. Both shear and normal forces acting along the interface between the elastic and viscoelastic layers were considered in the vibration analysis. Analytical results were compared with those obtained by a finite element method. Effects of the size and location of layers in partial dampers on system loss factor($\eta_s$) and resonant frequency($\omega_r$) were studied. which showed that partial dampers adhered to the site exhibiting the maximum amplitude of vibration were most influential in the increase of $\eta_s$ and the decrease of $\omega_r$. Specific system loss factor( $\eta_s$ divided by total mass of system) was also evaluated in the analysis.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.282-286
• /
• 1999

This paper describes the implementation of a fuzzy temperature measuring & control system to control the water temperature in plant. This system consisted of mainly three parts; sensing part, control part that includes a control algorithms introduced the fuzzy theory, and actuating part. The control algorithms of control part are utilized a look-up table method and firmware technique using one-chip microprocessor(89C52). For evaluating the performance of a fuzzy control system, the experiment results of a fuzzy controller are compared with these of a conventional PID controller which provides an auto-tuning function. The experiment results show that the proposed controller has a good control performance and is robust to external disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1594-1596
• /
• 1996

The NDT(nondestructive test) using pulse echo method with piezoelectric transducers and the system for NDT including image processing were studoed. The system consisted of pulse generator and receiver, two step motors for X-Y scanner, PC-Scope for data aquisition and PC-Lab for trigger and motor driving. We tested and estimated at one point under the following conditions : 1) just water, 2) Aluminum without any crack and 3) Aluminum with hole. The estimated NDT result of whole area (point : $35{\times}20$) is compared with real samples.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 춘계 학술대회 학술발표 논문집
• /
• pp.299-302
• /
• 2003

대용량의 퍼지데이터를 처리하기 위한 퍼지제어 시스템의 가장 큰 과제는 퍼지추론 및 비퍼지화 단계에서의 수행속도의 개선이다. 본 논문에서는 퍼지제어기의 속도 향상을 위해 [0, 1]사이의 실수값을 갖는 퍼지 소속 함수값을 정수형 격자(pixel)에 매핑시켜 정수형 퍼지 소속함수값만을 가지고 퍼지연산을 하는 정수형 퍼지제어기법을 적용한 고속이 정수 연산을 수행하는 퍼지 프로세서와 주변제어 시스템을 FPGA로 설계하여 기존 퍼지제어 시스템에 비해 매우 빠른 실시간 고속퍼지 제어시스템을 구현한다.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 학술대회 논문집
• /
• pp.261-262
• /
• 2003

We performed unsymmetrical analysis of a single line-to-ground fault in a three-phase system. The current limiting elements were meander type YBCO stripes coated with Au shunt. When the fault occurred, short circuit currents were effectively limited within 1-2 msec after fault instant. The unsymmetrical rate of fault phase was distributed from 6.4 to 1.4 and most of the fault current flowed in the grounding line due to its direct grounding system.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.156-161
• /
• 2014

With the proliferation of digital music, public's interest in music and desire to sing well are increasing. This paper presents the implementation of a tone correction system through a visualization of comparison between music and humming data. For this we extract MIDI note from music and humming data and then design a matching engine using DTW algorithm which is for robust matching results against local timing variation and inaccurate tempo. This system is expected to correct the user's wrong tone by visualization and feedback from the result.

• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.545-550
• /
• 2020

We propose a hole-filling method to solve discontinuous depth representation and to reduce the visible seams and cracks that cause the limitation of the viewing angle of the three-dimensional (3D) image in the multilayer type 3D display system. The occlusion and the disocclusion regions between layers, such as the visible seams and cracks, are a major bottleneck of the multilayer type 3D display system to represent a volumetric 3D image by stacking multiple images. As a result, in the reconstructed 3D image, the visible seams and cracks appear as brighter overlapping and undesirable cut-off. In order to resolve the problems above, we applied the depth-fused effect to the sub-depth map generating algorithm and improve the viewing characteristics of the multilayer type 3D display. The experimental demonstrations are also provided to verify the proposed scheme.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.81-88
• /
• 2007

This paper presents the development of a new inchworm actuation system using the shearing deformation of the piezoelectric actuators. In this new actuation system, piezoelectric shearing/expanding actuators, an inertial mass and an advanced preload system are configured innovatively to generate the motion of an inertial mass. There are two modes in the new actuation system: (1) stick mode, and (2) clamp mode. In stick mode, the deformation of the piezoelectric shearing actuators drives an inertial mass by means of the friction force at their contact interface. On the other hand, in clamp mode, the piezoelectric expanding actuators provide the gripping force to an inertial mass and, as a result, eliminate its backward motion following the rapid backward deformation of the piezoelectric shearing actuators. To investigate the feasibility of the proposed new actuation system, the experimental system is built up, and the static performance evaluation and dynamic analysis are conducted. The open-loop performance of the linear motion of the proposed new actuation system is evaluated. In dynamic analysis, the mathematical model for the contact interface is established based on the LuGre friction model and the equivalent parameters are identified.

• 한국작물학회지
• /
• 제41권6호
• /
• pp.672-677
• /
• 1996

전자코를 이용하여 향미품종에 대한 방향성 성분함량비율을 조사한 결과를 요약하면 다음과 같다. 1. 작용기별로는 polar compound계열과 aldehydes compounds계열이 apolar compounds 계열과 sulphur compounds, aminated com-pounds계열에 비해 약 3배정도 높은 함량 비율을 보였다. 2. 백미와 취반상태에 있어서 방향성 성분 함량변화는 대부분 0.02에서 0.1수준으로 증가하는 경향을 보였으나, 찰성을 가진 밀양 14006의 경우는 취반 상태에서 방향성 성분의 함량이 오히려 감소하는 경향을 보였다. 3. 향기와 amylose함량 관계에서는 Japonica와 Indica계열 모두 아밀로스함량이 높을수록 방향성 성분의 함량이 증가하는 경향을 보였다. 4. Headspace 진행 후 센서에 감지되는 시간대는 대부분의 품종에서 30～35초에서 가장 많은 향기성분의 양을 검출할 수 있었으나, 이리 41003의 경우는 방향성성분의 검출이 30초대 이후에 급격히 감소하였다.