• 한국통신학회논문지
• /
• 제5권1호
• /
• pp.60-69
• /
• 1980

크고 複雜한 線形回路方程式을 갖는 큰 계통의 回路를 解析하기 위해서는 매우 많은 記憶容量과 時間이 必要하다. 이러한 記憶容量과 계산 時間을 줄이기 위해서 본 論文에서는 Sparse 行列을 利用하여 增幅回路의 最適 設計를 하였다.

• 설비공학논문집
• /
• 제8권2호
• /
• pp.240-253
• /
• 1996

The refrigeration cycle of automobile air-conditioners is simulated in an effort to provide a computational tool for optimum thermodynamic design. In the simulation, thermodynamic and heat transfer analysis was performed for the four major components : evaporator, condenser, compressor, and expansion valve. Effectiveness-NTU method was used for modeling both evaporator and condenser. The evaporator was divied into many subgrids and simultaneous cooling and dehumidifying analysis was performed for each grid to predict the performance accurately. Blance equations were used to model the compressor instead of using the compressor map. The performance of each component was checked against the measured data with CFC-12. Then, all the components were combined to yield the total system performance. Predicted cycle points were compared against the measured data with HFC-134a and the deviation was found to be less than 5% for all data. Finally, the system model was used to predict the performance of CFC-12 and HFC-134a for comparison. The results were very reasonable as compared to the trend deduced from the measured data.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.273-276
• /
• 2005

Performance analysis of a solid oxide fuel cell/micro gas turbine hybrid system is conducted at design-point and part-load conditions and its results are discussed in this study. With detailed considerations of the heat and mass transfer phenomena along various flow streams of the SOFC, the analysis based on a quasi-2D model reasonably predicts its performance at the design-point operating conditions. In case of part-load operations, performance of the hybrid system to three different operation modes(fuel only control, speed control, and VIGV control) is compared. It is found that the simultaneous control of both supplied fuel and air to the system with a variable MGT rotational speed mode is the optimum choice for the high performance operation. And then, the dynamic characteristics of a solid oxide fuel cell are briefly introduced.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.19-29
• /
• 1997

A natural colorant was extracted from Clove using methanol. The dyeabilities and fastness of silk fabrics dyed with Clove extract were investigated. The results obtained were as follows; 1. The colorant extracted with methanol was higher in concentration than that with boiling water and was represented high reproducibility. 2. The optimum dyeing temperature and dyeing time were 6$0^{\circ}C$ and 60min, respectively. 3. The color depths were observed to be decreased as follows; pre-mordant > after-mordant repeat dyeing > after-mordant > simultaneous-mordant 4. Clove extract dyed brownish black on the Fe-mordanted silk. In case of the other mordants, silk fabrics dyed yellow. 5. The dyed silks had poor light-fastness but good wet-fastness.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.363-368
• /
• 2009

In the paper, we confirmed improvement Noise figure of the entire RF front-end using spiral inductor with PGS(Patterned Ground Shield) and current bleeding techniques. LNA design is to achieve simultaneous noise and input matching. Spiral inductor in input circuit of LNA inserted PGS for betterment of Q-factor. we modeling inductor using EM simulator, so compared with inductor of TSMC 0.18um. We designed and simulation the optimum structure of PGS using Taguchi's method. We confirmed enhancement of noise figure at LNA after substituted for inductor with PGS. Mixer designed using current bleeding techniques for reduced noise. We designed LNA using inductor with PGS and Mixer using current bleeding techniques, so confirmed improvement of noise figure.

• 대한환경공학회지
• /
• 제29권1호
• /
• pp.62-67
• /
• 2007

본 연구의 목적은 액상 균일질 촉매를 이용하여 연소가스 중에 포함되어 있는 $SO_2/NO$의 동시제거 기술 개발에 있다. 연구는 bench scale/소규모 pilot scale에서 이루어졌으며 연구 결과는 다음과 같다. 1) $SO_2$는 실험조건에 상관없이 높은 제거효율을 가지는 것으로 확인되었다. 그러나 NO의 경우 충진층 높이가 증가할수록, 농도가 낮을수록, 촉매 분사량이 증가할수록 제거효율이 증가하는 것으로 나타났다. 2) Fe(II)-EDTA를 이용한 $SO_2/NO$ 동시처리 기술 개발을 위한 최적의 설계 인자는 충진 높이 =0.5 m, 액체-기체비 = 20 $L/m^3$, 반응기 단수=3단, 반응기 단면적 = 0.025 $m^2$로 결정하였다. 3) 연구 결과를 기초로 $SO_2/NO$의 동시처리 효율을 실험한 결과 각각 95%, 81% 이상 제거가 가능했다. 4) 높은 HTU는 NO의 제거에 있어 유리하지만 과도한 HTU는 스크러버의 운전효율을 감소시키므로 최적의 HTU를 결정하는 것이 필요하다.

• Korean Chemical Engineering Research
• /
• 제46권5호
• /
• pp.858-862
• /
• 2008

분리 당화발효(Separate Hydrolysis and Fermentation, SHF)는 당화와 발효공정을 따로 수행하는 방법으로 최종 생성물인 글루코오스에 의해 억제 영향을 받기 때문에 반응에 진행됨에 따라 축적된 글루코오스의 농도가 높아지면 반응이 종결되는 단점이 있다. 이를 극복하기 위해 효소의 양을 늘리는 방법이 있지만, 효소의 생산비용이 비싸기 때문에 경제적인 방법이 될 수 없다. 이러한 분리 당화발효 공정의 단점을 극복하기 위해서 동시당화발효 공정(Simultaneous Saccharification and Fermentation, SSF)은 하나의 반응기에서 당화와 발효를 동시에 수행한다. 동시당화발효 공정에서는 당화과정에서 글루코오스가 생성되자마자 효모가 발효과정을 통해 글루코오스를 바로 제거하기 때문에 반응기내에서 당의 축적을 최소화할 수 있다. 따라서 동시당화발효 공정은 최종 생성물의 억제 작용을 방지할 수 있고, 효소의 가수분해 반응을 향상시킬 수 있다. 본 연구에서는 동시당화발효에서 에탄올의 수율에 관여하는 조건들(pH, 반응온도, 효소 투입량, 반응시간)의 최적 조건을 찾는 연구를 수행하였다. 기질로는 감자전분을 사용하였고, 효소는 glucoamylase, 균주는 Saccharomyces cerevisiae가 각각 사용되었다. 동시당화발효의 최적의 조건은 pH 4, 온도 38로 나타났다. 최적의 조건으로 감자전분을 동시당화발효하였을 때 반응 18시간 후에 에탄올은 최대 수율 86%에 도달하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권4호
• /
• pp.581-589
• /
• 2003

Film absorption involves simultaneous heat and mass transfer in the gas-liquid system. While the non-absorbable gas does not participate directly In the absorption process. its pretence does affect the overall heat and mass transfer. An experimental study was performed to investigate the heat and mass transfer characteristics of LiBr-H$_2$O solution flow ing over 6-row horizontal tubes with the water vapor absorption in the pretence of non-absorbable gases. The volumetric concentration of non-absorbable gas, air, was varied from 0.17 to 10.0%. The combined effects of the solution flow rate and its concentration on the heat and mass transfer coefficients were also examined. The presence of 2％ volumetric concentration of air resulted in a 25% reduction in the Nusselt number and 41% reduction in the Sherwood number Optimum film Reynolds number was found to exist at which the heat and mass transfer reach their maximum value independent of air contents. Reduced Nusselt and Sherwood numbers. defined as the ratio of Nusselt and Sherwood numbers at given non-absorbable gas content to that with pure water vapor, were correlated to account for the reduction in the heat and mass transfer due to non-absorbable gases in a falling film absorption process.

• 융합경영연구
• /
• 제9권1호
• /
• pp.25-40
• /
• 2021

Purpose: The forecasting is the likelihood scientifically proved judgment about the prospects, the possible conditions of this or that phenomenon in the future and (or) about the alternative ways and the means of their realization. To adapt the instruments of budgeting for the analysis cash flow of company. Research design, data and methodology: The creates the budget of cash flow were carried out on the basis of data of the report for the 2017 of corporations POSCO and in the first half of the 2018 Daewoo Shipbuilding & Marine Engineering of South Korea. Results: The simultaneous use of budgeting techniques and the simple financial analysis allows to systematize the transactions, to identify the main problem areas in the movement cash flows. Therefore, working capital analysis is to determine the limits of their fluctuations in view of the changes in the business processes. Conclusions: In the pedagogical context solved the features of budgeting in the part evaluation current assets, its financing, its elements: the cash, the debtor. In the process of budgeting of cash flow, in credit budget, in financial budget we can see the main indicators: the current assets, the functioning capital, the optimum number of debtors, the optimum amount of cash and another.

• Advances in Computational Design
• /
• 제2권4호
• /
• pp.313-331
• /
• 2017

In this study, teaching-learning based optimization (TLBO) is improved by incorporating model of multiple teachers, adaptive teaching factor, self-motivated learning, and learning through tutorial. Modified TLBO (MTLBO) is applied for simultaneous topology, shape, and size optimization of space and planar trusses to study its effectiveness. All the benchmark problems are subjected to stress, displacement, and kinematic stability constraints while design variables are discrete and continuous. Analyses of unacceptable and singular topologies are prohibited by seeing element connectivity through Grubler's criterion and the positive definiteness. Performance of MTLBO is compared to TLBO and state-of-the-art algorithms available in literature, such as a genetic algorithm (GA), improved GA, force method and GA, ant colony optimization, adaptive multi-population differential evolution, a firefly algorithm, group search optimization (GSO), improved GSO, and intelligent garbage can decision-making model evolution algorithm. It is observed that MTLBO has performed better or found nearly the same optimum solutions.