• 한국화재소방학회논문지
• /
• 제22권3호
• /
• pp.188-193
• /
• 2008

높이 1m의 수직벽면에서 3g/m^2-s$로 연소하는 프로판 수직벽 화재에 대한 수치모사를 수행하였다. 본 연구의 목적은 자연대류에서의 검증결과를 확인하고, 수직벽 화재의 수치모사의 결과를 이전의 연구와 비교하는 것이다 C_s=0.2$일 때 유동이 층류 경계층으로 나타났지만, C_s=0.1$일 때는 난류 경계층임을 확인하였다. z 방향 속도로부터 자연대류에서와 마찬가지로 난류혼합이 부족한 것으로 나타났고, 온도와 속도의 분포가 실험 및 이전의 시뮬레이션과 비교적 잘 일치하였다. 특히 x 방향 속도가 실험과 매우 잘 일치함으로써 경계층으로 공기유입이 잘 예측됨을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1178-1182
• /
• 2004

This paper presents web-based virtual laboratory system for electronic and digital circuit experiments. Through our virtual laboratory, the learners will be capable of learning the concepts and theories related to circuit experiments and how to operate virtual experimental equipments such as multimeters, function generators, digital oscilloscopes, DC power suppliers and bread board etc. The proposed virtual laboratory system is composed of important components: Principle Classroom to explain the concepts and theories of electronic and digital circuit operations, Simulation Classroom to provide a web-based simulator to the learners, Virtual Experiment Classroom to provide interactive multimedia contents about the syllabus of off-line laboratory class, Assessment Classroom, and Management System. With the aid of the management System every classroom is organically tied together collaboration to achieve maximum learning efficiency. We have obtained several affirmative effects such as high learning standard, reducing the total experimental hours and the damage rate for experimental equipments.

• 산업공학
• /
• 제22권1호
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.152-154
• /
• 2000

Electro_optical characteristics in AC-PDP are confined by a lots of parameters. especially driving pulse shape is very important to improve AC-PDP's luminosity and efficiency. In that experiment measure the luminosity, IR(Infra Red) peak value and response time as the increase of 1st, 2rd sustain pulse width. The VDS(Versatile Driving Simulator -developed by kwangwoon university-) was used to make driving pulse shape. It is found that IR response time after displacement current, Luminosity and IR peak value are changed on account of 1st,2rd sustain pulse width.

• 한국연소학회지
• /
• 제13권2호
• /
• pp.23-32
• /
• 2008

Gasification characteristics in the fluidized bed reactor are essential for the design of a gasification furnace to optimize the operation condition. Moisture content of the solid fuel is one of the important factors to influence directly the gasification characteristics. So it is necessary to investigate the effect of moisture content of solid fuel in partial oxidation condition. Gasification characteristics are investigated with results from thermogravimetric analyzer and lab-scale fluidized bed reactor for wood and RDF samples along with changing moisture contents. Additionally lab-scale fluidized bed reactor was run continuously and gas concentrations at the exit were measured. It is observed that the rate of reaction in partial oxidation condition is between the results from the combustion environment and from the inert condition. Moisture content in a particle slows down the heating rate of a particle. So, reaction is delayed by the moisture content. However, RDF samples those are easy to break-up don't show the effect of moisture content. The result of continuous operation condition shows that proper moisture content promotes gasification because steam from the particles helps gasification of the solid fuel. A simulation to predict the syn-gas composition was conducted by the Aspen Plus process simulator. The cold gas efficiency of the experiment was compared with results from the simulation.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.412-415
• /
• 2008

In a research on the practical dye-sensitized solar cell, a study on a large module have preference because module must be able to generate the proper current that is possible to convert electrically. So the parallel connection of dye-sensitized solar cells which outputs a large current easily is essential. However, there is a current loss in a paralle connection of dye-sensitized solar cells and the loss becomes larger according to increasing the number of parallel connection. In this study, we analyzed the cause of the current loss in the parallel connection by using the equivalent circuit analysis. One DSC used in this experiment had an active area $8cm^2$(4.62cm$\times$1.73cm) and it attained a conversion efficiency of 5.43% under 1 sun illumination ($P_{in}$ of 100 mW/$cm^2$) using a solar simulator.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1819-1823
• /
• 2005

Incorrect information on public sites can cause serious problem. One of relevant countermeasures against this problem is to detect of buried underground utilities in real time. Although there have been several method to detect of buried underground utilities, such as investigating of gravity and elastic wave and electric field, they have not been so efficient tools. Because it is too expensive and difficult to use. In this paper, magnetic sensors which could provide an easier and more efficient method are used to detect of buried underground utilities. Also fluxgate method of self detection are used. Input signal is used $1\~10kHz$ frequency. Filtering and signal processing of output signal are used labview software. After experiment, detection system of buried underground utilities which used magnetic shows possibility of precise detecting of laying object based on theorectical analysis for electromagnetic field.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4975-4983
• /
• 2010

본 논문은 전력전자회로에서 많이 사용되고 있는 가장 범용적이고 강력한 시뮬레이터인 PSPICE와 MATLAB에 적용하여 소자를 모델링하여 보다 쉽게 이해하고, 다양한 제어기술을 적용시킬 수 있도록 미시적인 IGBT, 거시적인 IGBT, PWM 발생기 그리고 유도 전동기를 라이브러리화 하여 모델링의 타당성을 해석하였다. 미시적인 IGBT 모델의 소자특성을 실험을 통해 모델링의 정확성을 입증하였으며, 거시적인 IGBT모델은 사이클로 컨버터와 유도 전동기의 부하를 가진 전압형 PWM 인버터에 적용시켜 시뮬레이션 하였다.

• 감성과학
• /
• 제7권3호
• /
• pp.27-35
• /
• 2004

본 연구는 피부전도도(skin conductance response), 말초혈관 반응(peripheral plethysmograph), 피부온도 (skin temperature)와 심박수(heart rate)와 같은 다양한 생리신호를 측정하여 운전자의 심리반응을 통하여 적정 운전상태를 분석하고자 하였다. 운전자의 심리반응을 측정 및 분석하기 위하여 하드웨어와 알고리듬을 개발하였으며, 운전상황은 자동차 시뮬레이터를 이용하여 다양한 가상 운전상황을 설정하고 생리신호를 측정하였다. 측정 결과 운전자 생리신호가 운전환경의 변화에 따른 심리적 긴장 또는 이완 수준을 잘 반영하고 있고, 감정적 변화에는 다소 둔감한 것으로 나타났다. 이를 심리적 순위척도를 이용하여 정량화하여 심리적 적정 운전범위를 제안하였다. 본 연구의 결과는 추후 운전자의 안전운전이나 건강상태를 모니터링 하기 위한 시스템 개발의 자료로 활용할 수 있을 것이다.

• 전기학회논문지
• /
• 제67권7호
• /
• pp.981-986
• /
• 2018

AC(alternating current) CB(circuit breaker) at the fault occurred in the existing AC distribution system is limiting the fault current through zero cross-point. However, DC(direct current) CB does not have zero cross-point. Therefore, arc occurred by on-off operation of DC CB is very huge. Nowadays, many research team are studying the way to decrease breaking time, which is one of the essential conditions in DC CB. We suggested novel arc-induction type DC CB in this paper. The proposed arc-induction type DC CB is composed of the mechanical Arc ring and DC CB. We confirmed the operation of arc-induction type DC CB through the HFSS(High Frequency Structure Simulator) 3D simulation program and performed the experiment for operation characteristics. Results showed that arcing time of the arc-induction type DC CB by using induction ring was faster than existing mechanical DC CB. On the transient system, we confirmed stable operation characteristics of the arc-induction type DC CB through the simulation and experimental results. We expect that the proposed arc-induction type DC CB technology is will go to stay ahead of the existing DC CB technology.