• 대한조선학회논문집
• /
• 제39권1호
• /
• pp.49-60
• /
• 2002

용접법은 선박 생산 공정에 있어서 금속 접합을 위해 가장 많이 사용되고 있다. 용접은 금속 접합을 위해 유용한 방법이지만 국부적 가열, 용융, 냉각으로 이어지는 열하중에 의하여 잔류응력과 잔류변형을 발생시킨다. 잔류응력은 구조물의 강도에 부정적인 영향을 끼치고, 잔류변형은 조립 작업에 부정적인 영향을 끼치게 된다. 그러므로 역학적 방법에 의한 잔류응력과 잔류변형의 예측은 이들을 제어할 수 있는 방법을 작업 전에 제시할 수 있도록 하므로, 선체 강도 확보와 선박 생산성 향상을 위하여 매우 중요한 문제라고 볼 수 있다. 본 논문에서는 이러한 배경에서 용접 현상을 가장 잘 시뮬레이션할 수 있는 방법인 유한요소법을 이용한 3차원 열탄소성 해석을 이용하였다. 열탄소성 해석을 위하여 온도분포를 계산한 후 계산된 온도분포를 이용하여 용접변형 및 응력을 순차적으로 계산하였다. 온도분포 계산을 위하여 용융과정을 엔탈피 방법을 이용하여 구현하였으며, 용접비드의 용입은 요소생성법을 이용하여 구현하였다. 본 연구에서 제안된 해석과정은 기존 연구에서 제시한 실험결과와 정성적으로 일치하는 결과를 주는 것을 확인하였다.

• 대한기계학회논문집A
• /
• 제30권5호
• /
• pp.602-608
• /
• 2006

Vehicle components such as lower control arm are usually affected by heat during the welding process. As a result, residual stress is generated, which has much effect on mechanical performances such as crashworthiness and durability. In this study, the residual stress in lower control arm has been measured by the x-ray diffraction method and been analyzed by finite element methods. Heat transfer during seam weld process has been calculated and used in calculating thermal deformation with temperature dependent material properties. High residual stress has been found at vertical wall both by measurement and simulation. The simulation also showed the residual stress re-distribution when the component is subjected to cyclic loading condition.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1330-1338
• /
• 2018

High-density UMo/Zr monolithic nuclear fuel plates have a promising application prospect in high flux research and test reactors. The solid state welding method called co-rolling is used for their fabrication. Hot co-rolling simulations for the composite blanks of UMo/Zr monolithic nuclear fuel plates are performed. The effects of coupon sizes and mechanical property parameters on the contact pressures between the to-be-bonded surfaces are investigated and analyzed. The numerical simulation results indicate that 1) the maximum contact pressures between the fuel coupon and the Zircaloy cover exist near the central line along the plate length direction; as a whole the contact pressures decrease toward the edges in the plate width direction; and lower contact pressures appear at a large zone near the coupon corner, where de-bonding is easy to take place in the in-pile irradiation environments; 2) the maximum contact pressures between the fuel coupon and the Zircaloy parts increase with the initial coupon thickness; after reaching a certain thickness value, the contact pressures hardly change, which was mainly induced by the complex deformation mechanism and special mechanical constitutive relation of fuel coupon; 3) softer fuel coupon will result in lower contact pressures and form interfaces being more out-of-flatness.

• 대한조선학회논문집
• /
• 제37권2호
• /
• pp.127-136
• /
• 2000

선박 건조 시 발생하는 용접변형은 블록의 정도를 떨어뜨리고 교정작업으로 인한 생산성 저하의 요인이 되고 있다. 따라서 설계 단계에서 변형을 최소화 할 수 있는 작업기준을 마련한다면 생산성 증대는 물론 품질의 향상을 가져올 수 있을 것이다. 여기에는 먼저 블록의 조립과정에 따른 변형을 예측할 수 있는 정확하고 효율적인 방법이 마련되어야 한다. 본 논문에서는 고유변형도 이론과 유한요소 해석을 결합한 효율적인 변형예측 기법을 제안하였다. 고유변형도는 간이 열탄소성 해석 결과 최고온도 분포와 구속도에 의해 결정된다. 따라서 용접 열전도 해석과 구조물의 조립과정에 따른 구속도 계산을 수행하여 실제 구조물에 발생하는 고유변형도를 정확히 구하고자 하였다. 이를 이용하여 보강판의 변형 예측을 구현하였고 간단한 선체 블록에 적용할 수 있음을 확인하였다.

• 대한기계학회논문집A
• /
• 제29권8호
• /
• pp.1146-1152
• /
• 2005

Recently, multi cell tube which is used for a cooling system of automobiles is mainly manufactured by the conform extrusion but this method is inferior as compared with direct extrusion in productivity per the unit time and in the equipment investment. Therefore, it is essential for the conversion of direct extrusion with porthole die. The direct extrusion with porthole die can produce multi cell tube which has the competitive power in costs and qualities compared with the existing conform extrusion. This study is designed to evaluate metal flow, welding pressure, extrusion load, tendency of mandrel deflection that is affected by variation of porthole shape in porthole die. Estimation is carried out using finite element method under the non-steady state. Also this study was examined into the cause of mandrel fracture through investigating elastic deformation of mandrel during the extrusion.

• 대한조선학회논문집
• /
• 제31권3호
• /
• pp.154-164
• /
• 1994

본 연구에서는 경제적이고, 품질이 우수한 용접 조립보의 생산을 위해 요구되는 조건을 컴퓨터 시뮬레이션 방법 및 최적화 방법을 이용해서 찾고자 한다. 이를 위해 용접 조건과 가열 조건 등 조립보의 생산 과정을 지배하는 변수를 선정하고, 이 변수에 따라 조립보 생산비를 추정할 수 있는 모델을 제시하여, 생산에 따른 제한 조건을 만족시키면서, 생산비가 최소가 되는 생산 변수를 구하였다. 더 나아가서 설계 및 생산의 통합 제어를 위해 용접 조립보의 생산에 따른 총 비용을 산출할 수 있는 추정식을 제시하고, 선급 규정에 따라 설계하는 과정까지 포함하여 최적화를 수행하였다. 또한 곡직가열이 불가능한 경우를 가정하여, 가중치법에 기초한 다목적 최적화 기법을 도입하고 최소 비용과 최소 변형의 절충해를 얻는 방법을 제시하였다.

• 동력기계공학회지
• /
• 제21권1호
• /
• pp.57-62
• /
• 2017

The flexible joint with bellows and flange is made by welding bellows and flange in general. The welded parts cause a crack or demage in the flexible joint due to continuous vibration and fatigue limit. This paper is concerned with development of flexible joint with non-welded, free rotation of flange and non-packing to improve fatigue failure condition between bellows and flange. The support box and support plate that are components of press part are designed to compress fore-end of bellows only without demage of bellows. The production system of flexible joint is designed with piston attached on the compression side. The simulation is performed using Deform 3D software. As the result of simulation, the shape of compressed bellows was most proper in the compression power of $157kg{\cdot}f$ and any deformation has not occurred at a part besides fore-end. The result show that the production possibility of the designed flexible joint.

• 한국해양공학회지
• /
• 제30권4호
• /
• pp.277-286
• /
• 2016

The first part of this study found the tendencies of the mechanical properties of two arctic structural steels (EH32 and FH32). In the second part, the crashworthiness of stiffened panels scaled down from the side frame structure of a Korean research icebreaker was determined. A procedure for designing the shapes and sizes of the stiffened panels, mass and shape of a drop striker, and a large temperature chamber, and then manufacturing these, is introduced in detail. From impact bending tests for the stiffened panels, the residual permanent deformations and deformation histories over time were captured using manual measurement and video image analyses. Numerical simulations of the impact bending tests were carried out for three different finite element models, which were mainly composed of shell elements, solid elements, and solid elements, with welding beads. It was proven from a comparison of the test results and numerical simulation results that the solid element model with the welding bead consideration approached the test results in terms of the residual deformations as long as the strain rate effect was taken into account.

• 한국정밀공학회지
• /
• 제31권12호
• /
• pp.1093-1100
• /
• 2014

The goal of this paper is to investigate preliminary the applicability of 3D printing technologies for the development of the hot bulk forming process and die. 3D printing technology based on the plastic material was applied to the preform design of the hot forging process. Plastic hot forging dies were fabricated by Polyjet process for the physical simulation of the workpiece deformation. The feasibility of application of Laser-aided Direct Metal Rapid Tooling (DMT) process to the fabrication of the hot bulk metal forming die was investigated. The SKD61 hot-working tool steel was deposited on the heat treated SKD61 using the DMT process. Fundamental characteristics of SKD 61 hot-working tool steel deposited specimen were examined via hardness and wear experiments as well as the observation of the morphology. Using the results of the examination of fundamental characteristics, the applicability of the DMT process to manufacture hot bulk forming die was discussed.