• Journal of the Korean Statistical Society
• /
• 제32권4호
• /
• pp.385-399
• /
• 2003

We first introduce the quasi-score estimating function and applied the quasi-score estimating function to nonlinear time series models. We proposed the M quasi-score estimating functions bounded functions for the quasi-score estimating functions. Also, we investigated the asymptotic properties of quasi-likelihood estimators and M quasi-likelihood estimators. Simulation results show that the M quasi-likelihood estimators work better than the least squares estimators under the heavy-tailed distributions

• Journal of Information Processing Systems
• /
• 제2권1호
• /
• pp.44-47
• /
• 2006

One of the critical issues in a sensor network concerns the detection of changes in data streams. Recently presented change detection schemes primarily use a sliding window model to detect changes. In such a model, a distance function is used to compare two sliding windows. Therefore, the performance of the change detection scheme is greatly influenced by the distance function. With regard to sensor nodes, however, energy consumption constitutes a critical design concern because the change detection scheme is implemented in a sensor node, which is a small battery-powered device. In this paper, we present a comparative study of various distance functions in terms of execution time, energy consumption, and detecting accuracy through simulation of speech signal data. The simulation result demonstrates that the Euclidean distance function has the highest performance while consuming a low amount of power. We believe our work is the first attempt to undertake a comparative study of distance functions in terms of execution time, energy consumption, and accuracy detection.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.685-692
• /
• 2004

A stochastic approach has been presented for superplastic deformation of Ti-6Al-4V alloy, and probability functions are used to model the heterogeneous phase distributions. The experimentally observed spatial correlation functions are developed, and microstructural evolutions together with superplastic deformation behavior have been investigated by means of the two-point and three-point probability functions. The results have shown that the probability varies approximately linearly with separation distance, and deformation enhanced probability changes during the process. The stress-strain behavior with the evolutions of probability function can be correctly predicted by the model. The finite element implementation using Monte Carlo simulation associated with reconstructed microstructures shows that better agreement with experimental data of failure strain on the test specimen.

• International Journal of Contents
• /
• 제10권1호
• /
• pp.23-28
• /
• 2014

When developing a classifier using various objective functions, it is important to compare the performances of the classifiers. Although there are statistical analyses of objective functions for classifiers, simulation results can provide us with direct comparison results and in this case, a comparison criterion is considerably critical. A Receiver Operating Characteristics (ROC) graph is a simulation technique for comparing classifiers and selecting a better one based on a performance. In this paper, we adopt the ROC graph to compare classifiers trained by mean-squared error, cross-entropy error, classification figure of merit, and the n-th order extension of cross-entropy error functions. After the training of feed-forward neural networks using the CEDAR database, the ROC graphs are plotted to help us identify which objective function is better.

• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.31-42
• /
• 2007

The unsymmetric finite element formulation has been proposed recently to improve predictions from distorted finite elements. Studies have also shown that this special formulation using parametric functions for the test functions and metric functions for the trial functions works surprisingly well because the former satisfy the continuity conditions while the latter ensure that the stress representation during finite element computation can retrieve in a best-fit manner, the actual variation of stress in the metric space. However, a question that remained was whether the unsymmetric formulation was variationally correct. Here we determine that it is not, using the simplest possible element to amplify the principles.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.107-114
• /
• 2021

High penetration of renewable energy generators causes unnecessary investment for power system facilities. Especially with Korean government policies such as Renewable Energy 3020 and Inter-connection support Responsibility of KEPCO for 1 MW DERs, the applications of DER interconnection in distribution system have been increasing. To save the investment, smart control functions for DERs are required and the test bed for the inverters which have not been prepared are necessary to insure DER inter-connection stability. For this, test bed for advanced functions of a smart inverter has been constructed and the tests for necessary functions have been implemented. In this paper, the test bed and environment as well as specifications are introduced and the test results for the validation of the functions are analyzed.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.128-136
• /
• 2013

This study presents the development of Gateway Control Module using SAE J1939 protocol for the commercial vehicles. Presently, the load rate of CAN bus is increased by the single network composition and addition of new ECUs for development of intelligent vehicles. Because the embedded system of the integrated network control function has the errors of the CAN bus caused by the increase of ECU, it is needed for development of commercial vehicles. Also, this study presents the development of smart functions that can diagnosis CAN bus errors, fault diagnosis of ECU and basic function that arbitrates CAN bus between ECUs of commercial vehicle. GCM was designed for 4channel separation about Gateway function as solution of load rate decrease and smart functions. HILS(Hardware in the loop simulation)system that can achieve simulation about CAN Messages of all systems on vehicle was applied to evaluate performance and verification of all functions and performance. The load rate on CAN bus was decreased at using functions what was delivery, block and process of GCM. Through this, it was enabled to organize systematic architecture for gateway.

• Bulletin of the Korean Chemical Society
• /
• 제19권4호
• /
• pp.422-428
• /
• 1998

In the present paper, we report a molecular dynamics (MD) simulation of non-rigid zeolite-A framework only as the base case for a consistent study of the role of intraframework interaction on several zeolite-A systems using the same technique in our previous studies of rigid zeolite-A frameworks. Usual bond stretching, bond angle bending, torsional rotational, and non-bonded Lennard-Jones and electrostatic interactions are considered as intraframework interaction potentials. The comparison of experimental and calculated structural parameters confirms the validity of our MD simulation for zeolite-A framework. The radial distribution functions of non-rigid zeolite-A framework atoms characterize the vibrational motion of the framework atoms. Mean square displacements are all periodic with a short period of 0.08 ps and a slow change in the amplitude of the vibration with a long period of 0.53 ps. The displacement auto-correlation (DAC) and neighbor-correlation (DNC) functions describe the up-and-down motion of the framework atoms from the center of α-cage and the back-and-forth motion on each ring window from the center of each window. The DAC and DNC functions of the framework atoms from the center of α-cage at the 8-ring windows have the same period of the up-and-down motion, but those functions from the center of 8-ring window at the 8-ring windows are of different periods of the back-and-forth motion.

• Journal of applied mathematics & informatics
• /
• 제42권4호
• /
• pp.749-759
• /
• 2024

In this manuscript, we formulate the notion of Ω(H, θ)-contraction on a self mapping f : W → W, this contraction based on the concept of Ω-distance mappings equipped on G-metric spaces together with the concept of H-simulation functions and the class of Θ-functions, we employ our new contraction to unify the existence and uniqueness of some new fixed point results. Moreover, we formulate a numerical example and a significant application to show the novelty of our results; our application is based on the significant idea that the solution of an equation in a certain condition is similar to the solution of a fixed point equation. We are utilizing this idea to prove that the equation, under certain conditions, not only has a solution as the Intermediate Value Theorem says but also that this solution is unique.

• 한국시뮬레이션학회논문지
• /
• 제6권2호
• /
• pp.45-57
• /
• 1997

MAC (media access control) bridge is used to interconnect separate LANs and to relay frames between the BLANs (bridged LANs). Bridge architecture consists of MAC entity, MAC relay entity and bridge protocol entity protocol entity and performs learning, filtering and forwarding functions using filtering database. In this paper, we simulate these functions of bridge and the STP (spanning tree protocol). The STP derives an active topology from an arbitrarily connected BLAN. Our simulation model assumes a BLAN consisted of three bridge forming a closed loop. In order to remove the loop, each bridge process exchanges configruation BPDU (bridge protocol data unit0 with other bridge processes connected to the bridge itself. To simulate the communication between bridges, we implement the IPC (inter-process communication) server using message queues. Our simulation results show that the assumed BLAN contains no closed loop and then there is no alternative route and no unnecessary traffic.