• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.111-120
• /
• 2006

In this paper, a node architecture of WDM metro network for connecting broadband access networks to converge wire/wireless networks. In consideration of the proposed node architecture and network requirements we proposed and evaluated medium access control protocols. We review WDM related technologies of sub-carrier multiplexing and optical components in order to resolve the bottleneck between optical backbone networks md access networks, and a access node architecture sharing common wavelength is introduced. Source-stripping (SS) MAC protocol Is evaluated under the proposed functional node architecture. DS+IS (Destination-Stripping and Source-Stripping) and DS+IS (Destination-Stripping and Intermediate-Stripping) MAC protocols are described to increase the slot-reuse factor which is low on SS MAC protocol. The key function of new MAC protocols regards the optical switch module of proposed node architecture and helps intermediate or source access nodes for dropping slots to destinations of different wavelength group. Thus, slot-reuse factor increases as the MAC protocols reduce the unnecessary ring-rotation of transferred slots. We use a numerical analysis to expect bandwidth efficiency and maximum throughput by slot-reuse factor Throughput network simulation, the verification of throughput, queuing delay, and transmission fairness are compared among MAC protocols.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.19-24
• /
• 2016

In Long Term Evolution-Advanced (LTE-A), small cell enhancement(SCE) has been developed as a cost-effective way of supporting exponentially increasing demand of wireless data services and satisfying the user quality of service(QoS). However, due to the dense and irregular distribution of a large number of small cells, the offloading scheme should be applied in the small cell network. In this paper, we propose an user offloading scheme for SCE in LTE-Advanced system. We divide the small cells into different clusters according to the reference signal received power(RSRP) from user equipment(UE). Within a cluster, We apply the user offloading scheme with the consideration of the number of users and interference conditions. Simulation results show that proposed scheme can improve the throughput, and spectral efficiency of small cell users. Eventually, proposed scheme can improve overall cell performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.13-18
• /
• 2016

In Long Term Evolution-Advanced (LTE-A), small cell enhancement(SCE) has been developed as a cost-effective way of supporting exponentially increasing demand of wireless data services and satisfying the user quality of service(QoS). However, there are many problems such as the transmission rate and transmission quality degradation due to the dense and irregular distribution of a large number of small cells. In this paper, we propose a clustering based interference management scheme in dense small cell network. We divide the small cells into different clusters according to the reference signal received power(RSRP) from user equipment(UE). Within a cluster, an almost blank subframe(ABS) is implemented to mitigate interference between the small cells. In addition, we apply the power control to reduce the interference between the clusters. Simulation results show that proposed scheme can improve Signal to Interference plus Noise Ratio(SINR), throughput, and spectral efficiency of small cell users. Eventually, proposed scheme can improve overall cell performance.

• Journal of the HCI Society of Korea
• /
• v.5 no.2
• /
• pp.15-24
• /
• 2010

A Digilog Book is an augmented reality (AR) based next generation publication supporting both sentimental analog emotions and digitized multi-sensory feedbacks by combining a conventional printed book and digital contents. As a Digilog Book authoring software, ARtalet provides an intuitive authoring environment through 3D user interface in AR environment. In this paper, we suggest ARtalet authoring environment based trajectory editing method to generate and manipulate a movement path of an augmented 3D object on the Digilog Book. Specifically, the translation points of the 3D manipulation prop is examined to determine that the point is a proper control point of a trajectory. Then the interpolation using splines is conducted to reconstruct the trajectory with smoothed form. The dynamic score based selection method is also exploited to effectively select small and dense control points of the trajectory. In an experimental evaluation our method took the same time and generated a similar amount of errors as the usual approach, but reduced the number of control points needed by over 90%. The reduced number of control points can properly reconstruct a movement path and drastically decrease the number of control point selections required for movement path modification. For control manipulation, the task completion time was reduced and there was less hand movement needed than with conventional method. Our method can be applicable to drawing or curve editing method in immersive In-Situ AR based education, game, design, animation, simulation application domains.

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.324-329
• /
• 2016

Constructed wetlands are widely applied in urban and rural areas for various purposes such as pollutants reduction, acquisition of eco-spaces and habitats, flooding reduction, acquisition of water resources and environmental education. Since the design of constructed wetlands utilizes ecosystems, special consideration must be given to ecological mechanisms, environmental mechanisms and hydrological mechanisms. To ensure the sustainable functionality of constructed wetlands, it is necessary to achieve stable flow rate and velocity, and remove sediments to ensure sufficient space for detention. To enhance the efficiency of constructed wetland sedimentation basins, this study determined the optimal position for baffle installation, and applied Computational Fluid Dynamics (CFD) to the cross-sectional design of wetlands. CFD analysis revealed that the decrease in flow velocity with baffle installation enhanced the efficiency of sedimentation of particulate matters. Vertical baffles had higher sedimentation efficiency than those with an inclined angle. When vertical baffles were installed in the sedimentation basin of a hybrid constructed wetland to reduce non-point source pollutants in urban areas, the average flow velocity within the basin decreased by 10~30%, while the sedimentation efficiency improved by 1.3~1.5 times. The application of CFD to constructed wetlands is expected to improve the cost efficiency of designing hybrid constructed wetlands with high removal efficiency.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.6 no.2
• /
• pp.127-139
• /
• 2004

Agricultural meteorology has advanced during the last 100 years from a descriptive to a quantitative science using physical and biological principles. The agricultural community is becoming more aware that using climate and weather information will improve their profitability and this will no doubt increase the demand for agrometeorological services. Hence it is timely that the needs and perspectives for agrometeorology in the 21$^{21}$ Century are grouped under two major headings: agrometeorological services for agricultural production and agrometeorological support systems for such services. Emphasis must be placed on the components of such support systems comprising of data, research, policies and training/education/extension. As Monteith (2000) mentioned, food supplies ultimately depend upon the skill with which farmers ran exploit the potential of good weather and minimize the impact of bad weather. Recent developments in instrumentation, data management systems, climate prediction, crop modelling, dissemination of agrometeorological information etc., provide agrometeorologists the tools necessary help the farmers improve such skills. The future for operational applications of agricultural meteorology appears bright and such applications could contribute substantially to promote sustainable agriculture and alleviate poverty.

• The Journal of Engineering Geology
• /
• v.17 no.4
• /
• pp.643-653
• /
• 2007

Average hydraulic conductivity was $2.64{\times}10^{-8}m/sec$ average RQD was 78%, average porosity was 0.51%, and range of groundwater level was $77.06{\sim}125.97m$ by measured in 8 boreholes at the Surak Mt. tunnel area. Groundwater level of two peaks in the Surak Mt. tunnel area were estimated through linear regression analysis for groundwater level versus elevation. And, average horizontal hydraulic gradient in the Surak Mt. tunnel area was calculated 0.267. Minimum, maximum, and average hydraulic conductivities that estimated by field tests were $5.56{\times}10^{-9}m/sec,\;6.12{\times}10^{-8}m/sec,\;and\;2.64{\times}10^{-8}m/sec$, respectively. Groundwater discharge rates per 1 meter that estimated using minimum, maximum, and average hydraulic conductivities and average horizontal hydraulic gradient were $0.00585m^2/day,\;0.06434m^2/day,\;and\;0.02775m^2/day$, respectively. Pure groundwater recharge rate per unit recharge area was calculated 223.96 mm/yr through water balance analysis. Prediction simulation of groundwater level fluctuation with minimum, maximum, and average hydraulic conductivities were conducted. Discharge rate into the Surak Mt. tunnel for minimum hydraulic conductivity was small, but groundwaer drawdown was highly. Discharge rate into the Surak Mt. tunnel for maximum hydraulic conductivity was higher, but groundwaer level was recovered quickly.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.163-172
• /
• 2012

Modern society, various great strength crimes are producing. After all crimes happen, it is most important that prevent crime beforehand than that cope. So, many research studied to prevent various crime. However, existing method of studies are to analyze and prevent by society and psychological factors. Therefore we wishes to achieve research to forecast crime by time using Markov chain method. We embody modelling for crime occurrence estimate by crime type time using crime occurrence number of item data that is collected about 5 great strength offender strength, murder, rape, moderation, violence. And examined propriety of crime occurrence estimate modelling by time that propose in treatise that compare crime occurrence type crime occurrence estimate price and actuality occurrence value. Our proposed crime occurrence estimate techniques studied to apply maximum value by critcal value about great strength crime such as strength, murder, rape etc. actually, and heighten crime occurrence estimate probability by using way to apply mean value about remainder crime in this paper. So, we wish to more study about wide crime case and as the crime occurrence estimate rate and actuality value by time are different in crime type hereafter applied examples investigating.

• Journal of Korea Technology Innovation Society
• /
• v.11 no.3
• /
• pp.376-399
• /
• 2008

Science and technology (S&T) is one of the most important elements in a nation's competitiveness. In an effort to strengthen their national competitiveness, all countries are focusing on upgrading the level of eir S&T. With these factors in mind, Korea has increased its support of national research and development (R&D). In recent years, this added support has resulted in an increased interest in the effectiveness of R&D. We have made continuous efforts to enhance the accountability and effectiveness of R&D by strengthening performance evaluation and considering R&D evaluation results during the budget review (appropriation) process. In order to change to a performance based system, we need to develop objective and scientific indicators to measure and evaluate the quality of the research performance of R&D programs. One of the primary research outcomes is publications. The impact factor of publications is widely used to evaluate overall journal quality and the quality of the papers published therein. However, the use of impact factors has been criticised because they can vary greatly when works from different subject areas are compared. In order to overcome this limitation, we have developed three kinds of qualitative indicators, which are functions of the impact factor. Two of these qualitative indicators, Modified Rank Normalized Impact Factor and Ordinal Rank Normalized Impact Factor, are based on order statistics (rank) for all journals from a specific specialty. The third qualitative indicator, Relative Field Impact Factor, uses the average impact factor of all journals within a subject category. We also suggest a quantitative indicator, Percentage of Contribution. In this study, we suggest 4 indicators and use them to evaluate the performance of outcomes from three R&D programs supported by the Ministry of Education, Science & Technology. We also perform a simulation study to verify the effectiveness of the proposed indicators. It can be shown that the proposed Ordinal Rank Normalized Impact Factor is the most reliable and effective indicator for comparing research performance across subject categories. However, we recommend using previous indicators in combination with the proposed indicators in this study for the research evaluation of R&D programs.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.4
• /
• pp.835-845
• /
• 2013

Association rule of data mining techniques is the method to quantify the relevance between a set of items in a big database, andhas been applied in various fields like manufacturing industry, shopping mall, healthcare, insurance, and education. Philosophers of science have proposed interestingness measures for various kinds of patterns, analyzed their theoretical properties, evaluated them empirically, and suggested strategies to select appropriate measures for particular domains and requirements. Such interestingness measures are divided into objective, subjective, and semantic measures. Objective measures are based on data used in the discovery process and are typically motivated by statistical considerations. Subjective measures take into account not only the data but also the knowledge and interests of users who examine the pattern, while semantic measures additionally take into account utility and actionability. In a very different context, researchers have devoted a lot of attention to measures of confirmation or evidential support. The focus in this paper was on asymmetric confirmation measures, and we compared confirmation measures with basic association thresholds using some simulation data. As the result, we could distinguish the direction of association rule by confirmation measures, and interpret degree of association operationally by them. Futhermore, the result showed that the measure by Rips and that by Kemeny and Oppenheim were better than other confirmation measures.