GPS(Global Positional System)는 인공위성을 이용하여 언제, 어디서나 자신의 위치를 정확히 측정할 수 있는 항법 시스템이다. 본 논문에서는 이 GPS 신호에서 항법 데이터를 복원하는 수신기의 지연동기 루프를 이론적으로 해석하고, 디지털 로직으로 설계하였다. 또한 동기과정의 논리동작을 분석하였다. 설계한 시스템은 수신된 C/A(coarse/acquisition) 코드와 수신기에서 발생된 C/A 코드와의 상관값을 구하는 상관기, 선택된 위성의 C/A 코드를 발생시키는 C/A코드 발생기, 그리고 C/A코드의 위상과 클럭속도를 조절할 수 있도록 C/A 코드 발생기의 클럭을 만드는 직접 디지탈 클럭 발생기로 구성된다. 제안한 디지탈 지연동기루프 시스템을 해석한 결과, 시스템 입력 신호전력이 -113.98dB이상이면 시스템이 90%이상의 검파 능력을 갖음을 확인하였다. 디지탈동기루프이 입력신호 즉, A/D 컴버터 전단의 입력신호 크기에 따라 디지탈 동기 루프의 성능 그래프와 문턱전압의 크기에 따른 성능분석의 그래프를 시뮬레이션을 통하여 분석하였다. 그리고 설계된 디지탈 지연동기루프를 로직 시뮬레이션한 결과, GPS 항법 데이타를 정확히 복원함을 확인하였다. 개선됨을 알 수 있었다.
Vibration test on MAST(multi axial simulation table) system has several advantage over one-axial vibration test that could simulate 6-DOF, 3-axial translation and 3-axial moment, at the same time. Since field vibration motion can be fully represented with 6-DOF, multi-axial vibration test on vehicle component is widely conducted in technical leading companies to make sure its fatigue performance in vibration environment. On the way to fulfill the process, editing technique of obtained field data is key issue to success a reliable vibration testing with MAST system. Since the original signals are not only too large to fulfill it directly, but all of the measured data is not guarantee its convergency on generating its driving files, editing technique of the original signals are highly required to make some events that should meet the equal fatigue damage on the target component In this paper, key technique on editing a field data feasible for MAST system is described based on energy method in vibration fatigue. To explain its technique explicitly, author first introduced a process on field data acquisition of two vehicle component and then, representing events are produced to keep up with the editing strategy about a energy method. In the final chapter, a time information regarding a vibration test on MAST system is derived from the energy data which is critical information to perform a vibration test.
일반 위상배열초음파 시스템은 배열된 개별의 소자에 시간지연을 적용함으로써 초음파 빔을 조향하고 초음파 이미지를 구성한다. 반면, full matrix capture(FMC)은 위상배열탐촉자에서 가능한 모든 송수신 조합의 A-scan 데이터 전체를 수집하는 신호 수집 방법이며, FMC 데이터의 후처리를 통해 기존 위상배열초음파와 동등한 이미지뿐만 아니라 기존 위상배열초음파에서 구현하지 못하는 다양한 이미지를 합성할 수 있다. 본 논문에서는, 균열 형태의 결함을 영상화할 수 있는 LLL mode total focusing method(TFM)에 대한 기본 알고리즘을 기술하고, 실험 및 초음파 시뮬레이션을 통해 수집된 FMC 데이터에 대해 이 기법을 적용하여 결함의 이미지를 합성하였다.
하수 처리장은 화학적, 물리적, 생물학적 처리가 복합적으로 연계된 공정으로 구성 되는데, 각각의 단위공정과 전체시스템의 처리 성능 및 운영 상태의 정도를 파악 하려면 처리공정의 수학적 모델을 빠르게 연산 할 수 있는 컴퓨터 시뮬레이터를 이용하면 편리하다. 주어진 물리적 환경에서 처리공정의 오염물질, 화학물질, 생물학적 매체의 질량 수지를 계산하는 컴퓨터 시뮬레이터는 데이터의 입출력 과정과 수학모델의 연산과정을 효율적으로 수행하는 응용 소프트웨어로써 처리조 내부에서 일어나는 반응의 상태를 정량적으로 추산하는 도구이다. 이러한 시뮬레이션 소프트웨어는 처리시설의 성능 및 효율을 예측하여 운용자에게 최적 관리를 위한 의사결정의 타당성을 제공하게 되는데, 시뮬레이션 소프트웨어를 처리시설에 적합하도록 시나리오를 설정하고 데이터 수집 시스템에 연결하면 실시간으로 처리시설의 분석이 가능한 자동화 운영 시스템의 역할을 수행한다. 본 논문에서는 통합전산망에서 수집되는 데이터를 시뮬레이션 소프트웨어에서 운용, 실제 운영 상태와 시뮬레이션 결과를 실시간 비교, 분석하여 최적의 운전인자를 도출할 수 있는 시나리오 운영 소프트웨어 "WEC-Sim"의 설계 및 구현에 대하여 논한다.
Since Chrysler Motor Co. had experienced the digital development system in the beginning of 1990's, most of leading automobile companies are trying to apply a digital information system for their own business process reengineering based upon concurrent engineering system from product planning phase. This is called as virtual DMU(Digital Mock-Up) system instead of the traditional PMU(Physical Mock-Up) system. By using the virtual prototype, all of the design requirements and system specifications can be checked, changed and optimized more quickly and more efficiently. This paper consists of five chapters for the DMU information system. In the 1$^{st}$ chapter, the principle of digital design system is suggested by using four basic modules such as product design module, process design module, manufacturing system design module and central control module. The basic scheme of DMU is introduced with the benefits of application in the chapter 2. In the chapter 3, a digital design process of new car development is explained with the detailed DMU design and design review processes. In the chapter 4, the practical DMU manufacturing techniques and applications are introduced as CAD/CAM analyses, DPA(Digital Pre-Assembly)reviews for development, production, operation and maintenance phases, digital tolerance analyses and digital factory analyses for assembling line simulation, automated robot welding processes, production jig & fixtures and painting process simulation. Finally, the activities of digital design support; CAS-styling, CAE-engineering and CAT-testing are summarized for design optimization in the chapter 5. As today's automobile manufactures and related business organizations are struggling to compete in the global marketplace, they are concentrating on efficient use of DMU information system to reduce the new car development cost, to have shorten the delivery schedule and to improve product design quality. To meet the demand of those automobile industries on digital information systems, the CALS(Computer aided Acquisition and Logistics Support) and EC(Electronic Commerce)initiative has been focused as a dominant philosophy in defense & commercial industries, specially automobile industries.s.
M&S 도구로서의 Battle Lab은 무기체계 획득 주기상 소요결정부터 연구개발 및 시험평가/훈련에 이르기까지 다양하게 활용 가능하다. 국내에서는 Battle Lab 구축의 중요성에도 불구하고 아직까지 초보적인 Battle Lab을 구축하고 있다. 전장 환경을모의함에 있어서 특히 Live, Virtual, Constructive 모델이 연동되는 M&S 도구의 활용도는 무기체계 개발을 위한 SE(체계공학)프로세스 전 과정에 걸쳐 적용 될 경우 시간적, 공간적 제약을 해소하고 기술적 구현이 가능하다는 점에서 반드시 필요하다. 본 연구에서는 전장 환경 모의시 모의 체계간 상호운용성을 보장하는 환경을 제공할 수 있도록 하여 그 활용도를 극대화한다.L-V 연동은 Virtual 모의기에서의 전술데이터링크 활용으로 Live 연동이 가능하도록 하는 방안과 V-C간 연동은 Virtual/Constructive 모의기에 M&S의 표준 도구인 RTI 활용 방법을 제안한다. 그리고 제안한 방법을 방공 Battle Lab으로 구축한 사례를 보인다. 방공 Battle Lab은 표적이 접근하는 경우 교전 무기체계에서 상부체계 명령을 통해 교전 모의를 수행할 수 있는 시스템으로 Constructive인 표적과 유도탄, 레이더, 발사대 모의기와 Virtual인 중앙방공통제소, 대대, 사격통제소 모의기간에 RTI RPR-FOM 1.0 연동하고, 또한 Virtual 모의기간 전술데이터링크 Link-11B, ATDL-1을 연동하여 Live 체계간의 상호운용성을 보장할 수 있음을 보인다.
본 논문에서는 지상에 수신 레이다들이 배치된 바이스태틱(bistatic) 환경에서 SAR(synthetic aperture radar) 이미징(imaging) 기법을 적용하여 이동표적을 탐지 및 이미징할 수 있는 지대공 바이스태틱 레이다 시스템 및 이에 대한 구현 알고리즘을 제안한다. 제안 시스템이 기존 SAR 시스템과는 달리 수신 레이다들의 집합에 의해 안테나 개구면(aperture)을 합성하도록 하여 탐지 영역에 대한 조사(illumination)가 길 필요가 없으며, 또한 표적 영상 복원을 위해 평면파 근사화(planewave approxiamtion)에 기반한 SAR 폴라 포맷(polar format) 알고리즘을 적용함으로써 수신 레이다들이 공간상에서 균일하게 이격될 필요가 없음을 보인다. 인접 펄스 수신신호 처리를 통한 클러터 성분 제거 과정이 포함된 영상 복원 알고리즘을 유도하며, 시스템 구현과 관련된 영상 해상도 및 수신 레이다의 공간상 위치 불규칙성에 따른 보상 방법을 설명한다. 최종적으로 시뮬레이션을 통해 제안 시스템의 성능을 보인다.
방대한 규모와 복잡한 프로세스로 구성된 공공조달의 혁신성과를 평가하기란 매우 어려운 문제이다. 기존의 프로세스 혁신 평가는 주로 설문 및 인터뷰, 그리고 운영데이터를 분석한 정성적, 또는 통계적인 정량적 방법들이었다. 이에 본 연구에서는 공공조달 프로세스를 복잡계로 보고 이에 대한 시뮬레이션 방법으로 멀티에이전트시스템(MAS)을 이용하여 공공조달 프로세스 혁신효과 평가모델을 개발하였다. 그리고, 개발된 MAS 기반의 공공조달 혁신평가 모델을 우리나라 조달청의 G2B(나라장터, KONEPS) 시스템에 적용하여 혁신효과를 평가하였다. MAS 시뮬레이션 도구는 Northwestern University에서 개발된 Netlogo Version 4.1.3을 사용하였고, 모델링에서는 에이전트 정의, 에이전트 행동특성 정의, 에이전트 관계 정의의 세단계로 진행하였다. 첫째, 에이전트 정의에서는 에이전트가 될 대상을 선정하고, 에이전트가 가진 속성과 변수들을 정의하였다. 둘째, 행동특성 정의에서는 각 에이전트의 행동계획 및 자원할당을 설정하였고, 셋째, 관계정의 단계에서는 상태변화에 따른 행동 규칙을 설정하였다. 또한 프로세스 혁신의 목적에 맞는 성과를 측정하기 위하여 혁신 효과평가항목을 선정하였고, 데이터는 조달청의 협조를 통해 DB 데이터와 설문데이터를 활용하였다. 이를 통해 프로세스 전체 및 프로세스별 절감시간과 업무량의 절감율을 측정하였다. 실험결과 전체 프로세스의 효율성이 증대되었으며 '평균 업무처리 건수'의 절감율이 92.7%, '평균 업무처리 시간'의 절감율이 95.4%로 나타났다. 즉 공공조달분야는 G2B 시스템 도입을 통해 프로세스 혁신을 추진한 결과 매우 높은 효율성이 제고된 것으로 분석되었다. 또한 본 연구를 통해 '계약'과 관련한 업무프로세스에서 추가적인 개선이 이루어질 경우 프로세스 혁신효과가 더욱 향상될 수 있는 것으로 분석되었다. 본 연구는 MAS를 이용하여 프로세스 개선효과에 대한 평가모델을 제시하고 분석했다는데 의의가 있다.
방사선 영상 기술은 피사체의 조성 및 두께에 따라 변화되는 X선의 흡수계수 차이를 기반으로 형성되는 대조도를 영상화하는 기술로서 영상 검출기에 입사하는 1차선 뿐 만 아니라 산란선이 영상 품질에 큰 영향을 미친다. 이에 본 연구에서는 피사체 두께, 조사야 변화에 따라 발생하는 산란선이 영상 품질에 미치는 영향을 고찰하고자 몬테카를로 시뮬레이션을 통하여 FSR 및 SPR 분석을 수행하였다. 연구 결과, 피사체 두께에 따른 FSR은 최대 15.3%p, SPR은 2.00 ~ 4.54로 분석되었으나, 조사야 변화에 대해서는 일정한 값을 유지하는 것으로 분석되었다. 이러한 결과를 바탕으로 피사체 두께는 영상 품질에 영향을 미치는 인자로서 고려되어야 하지만, 조사야는 영상 품질에 영향을 미치지 못하는 인자임을 검증하였다. 이러한 본 연구 결과는 영상 품질 개선을 위한 산란선에 대한 기초 자료로서 활용할 수 있을 것으로 사료된다.
The purpose of this study was the acquisition of the optimum scale of the apportionment of standard & high-class bed for the maximum profit representative of the desire of customers in a General Hospital with 1,100 beds located in Seoul. This investigation was proceeded by the analysis of the result of the simulation with the survey of both the patients' needs for bed and the degree of the medical service by the grade of the ward. And finally the consequence was obtained as follows: 1. The result of the investigation of the inpatients' preference for the grade of ward classes shows that a private ward reflected 4.3 percent, a semi-private ward 1.7 percent, a three-bed ward 0.1 percent, and a ward with six beds 93.9 percent each other. 2. A questionnaire poll was paralleled of service terms of a medical doctor and a nurse by ward class, the data were used for the standard of the allotment of labor cost by the ward class. The poll shows that the service tenn of a medical doctor and a nurse based on a ward with six beds by ward class showed 1.7 times in internal medicine and 1.9 times in surgery at a private ward; 1.4 times in internal medicine and 1.7 times in surgery at a semi-private room; and 1.2 times both in internal medicine and in surgery at a three-bed ward 3. The resultant findings revealed the most profit per bed and per patient in a private ward. However, an analysis of profit with a standard of unit area by ward class represented a higher profit in both the internal medicine and the surgery semi-private ward than other ward classes. 4. The result of the analysis through simulation based on the data of the prime cost per the ward class proved the optimum scale of the distribution of beds by class as follows: sixteen beds of the internal medicine and twenty three beds of the surgery in the private ward; two hundreds and two of the internal medicine and one hundred and ninety eight of the surgery in the semi-private room; three of both the internal medicine and the surgery each other in the three-bed ward; one hundred and ninety eight of the internal medicine and two hundred and fifty two of the surgery in the ward with six beds. The result of this research exhibits that the income and expenditure of the hospital could be improved by changing parts of wards into private ones(containing the maximum profit per a unit of width) in case the scale of the number of beds is reset with the consideration of the profit per the unit width. In the near future it's strongly expected that the research for the more scientific standard of the allotment of labour cost by ward class and for definition of the optimum scale of the number of beds that actualize the maximum profit with the change of the three elements of the prime cost: cost of materials; labor costs; management expenses.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.