• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.194-199
• /
• 2003

The studying is to analyze characteristic of air flow and is used to design in an automotive HVAC module. The RNG k-e turbulence model with the Upwind Difference convection scheme and an unstructured hybrid mesh with arbitrary matching method were applied to the simulation. The comparing air flow characteristic of the basic HVAC module and total HVAC module with blower were discussed in the paper.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• 멤브레인
• /
• 제18권4호
• /
• pp.294-305
• /
• 2008

본 연구는 공정모사를 통해서 막모듈 배열 및 연결과 막모듈 내에서 공급 잔류액의 온도 변화가 투과증발 공정에 끼치는 영향을 관찰하였으며 이를 위해서 기본 막모듈이 직렬 혹은 병렬로 연결되어 있는 모듈들의 조합을 통한 투과탈수공정을 예측할 수 있는 모델식들을 확립하였다. 에탄올/물 혼합물을 모델 혼합물로 사용하였고 모델식들에 포함되어 있는 투과 파라메타들을 직접 실험에 의해 구하여 사용함으로써 모사의 현실성을 높였다. 모사를 통해서 모듈의 배열방식, 모듈 단의 갯수와 단사이의 공급액의 재가열등의 중요성을 검토하였다.

• 대한간호학회지
• /
• 제51권6호
• /
• pp.648-660
• /
• 2021

Purpose: This study aimed to develop an emerging infectious disease (COVID-19) simulation module for nursing students and verify its effectiveness. Methods: A one-group pretest-posttest quasi-experimental study was conducted with 78 under-graduate nursing students. A simulation module was developed based on the Jeffries simulation model. It consisted of pre-simulation lectures on disaster nursing including infectious disease pandemics, practice, and debriefings with serial tests. The scenarios contained pre-hospital settings, home visits, arrival to the emergency department, and follow-up home visits for rehabilitation. Results: Disaster preparedness showed a statistically significant improvement, as did competencies in disaster nursing. Confidence in disaster nursing increased, as did willingness to participate in disaster response. However, critical thinking did not show significant differences between time points, and neither did triage scores. Conclusion: The developed simulation program targeting an infectious disease disaster positively impacts disaster preparedness, disaster nursing competency, and confidence in disaster nursing, among nursing students. Further studies are required to develop a high-fidelity module for nursing students and medical personnel. Based on the current pandemic, we suggest developing more scenarios with virtual reality simulations, as disaster simulation nursing education is required now more than ever.

• 소성∙가공
• /
• 제4권1호
• /
• pp.28-38
• /
• 1995

An integrated process planning system can determine desirable operation sequences even if they have little experience in the design of multistage cold forging process. This system is composed of seven major modules such as input module, pre-design module, formability check module, forming sequence design module, forming analysis module, FEM verification module, and output module which are used independently or in all. The forming sequence for the part can be determined by means of primitive geometries such as cylinder, cone, convex, and concave. By utilizing this geometrical characteristics(diameter, height, and radius), the part geometry is expressed by a list of the primitive geometries. Accordingly, the forming sequence design is formulated as the search problem which starts with a billet geometry and finishes with a given product one. Using the developed system, the sequence drawing with all dimensions, which includes the dimensional tolerances and the proper sequence of operations for parts, is generated under the environment of AutoCAD. Several forming sequences generated by the planning system can be checked by the forming analysis module. The acceptable forming sequences can be verified further, using FE simulation.

• 정보처리학회논문지A
• /
• 제19A권1호
• /
• pp.23-34
• /
• 2012

본 연구에서는 오토마타 이론을 적용하여 Simulink 모델의 각종 정보를 보여주고 시뮬레이션 결과를 출력하는 모듈 구조를 제안하고, 이를 구현하였다. 이 모듈은 사용자로부터 명령을 받아서 Simulink 모델의 각종 내부 정보와 시뮬레이션 결과를 보여주는 기능을 제공하는 메인 프로그램과 Simulink 모델의 시뮬레이션을 제어하기 위한 별도의 스레드, 그리고 실제로 시뮬레이션을 수행하는 Simulink 모델의 세 가지 독립적인 시스템으로 이루어져 있다. 오토마타를 이용하여 각 시스템과 전체 모듈을 설계 및 검증하고, C# 과 MATLAB을 통해 이를 구현한다. 그리고 구현된 모듈의 동작을 실제 모델을 통한 실험으로 검증하였다.

• 한국태양에너지학회 논문집
• /
• 제36권2호
• /
• pp.65-72
• /
• 2016

PV module is installed in various outdoor conditions such as solar irradiation, ambient temperature, wind speed and etc. Increase in solar cell temperature within PV module aggravates the behaviour and durability of PV module. It is difficult to measure temperature among respective PV module components during PV module operating, because the temperature within PV module depends on thermal characteristics of PV module components materials as well as operating conditions such as irradiation, outdoor temperature, wind etc. In this paper, simulation by using finite element method is conducted to predict the temperature of each components within PV module installed to outdoor circumstance. PV module structure based on conventional crystalline Si module is designed and the measured values of thickness and thermal parameters of component materials are used. The validation of simulation model is confirmed by comparing the calculated results with the measured temperatures data of PV module. The simulation model is also applied to estimate the thermal radiation of PV module by front glass and back sheet.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.116-119
• /
• 1998

Abstract-In paper, an operation support software for combustion control of refuse incineration plant is developed using fuzzy model and genetic algorithm. It has two major modules which are simulation module and optimal operation module. In simulation module modelling is performed to obtain fuzzy model of the refuse incineration plant and obtained fuzzy model predicts outputs of the plant when inputs are given. This module can be used to obtain control strategy, and train and enhance operators' skill by simulating the plant. And in optimal operation module, genetic algorithm searches and finds out optimal control inputs over all possible solutions in respect to desired outputs. In order to testify proposed operation support software, computer simulation was carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.624-627
• /
• 1996

To provide pleasant building environment and the ease of maintenance and facility management, many new office buildings are being built as intelligent buildings. Building control systems which are employed in intelligent buildings require advanced types of controllers and varieties of control schemes. Designing and installation of these types of advanced building control systems take a lot of effort and also they are costly. In order to design these systems, it is necessary for the designers to have means to analyze and estimate the performance of control systems. The simulator which is presented in this paper is composed of three parts, HVAC simulation module, elevator simulation module, and evacuation modeling module for the outbreak of fire or similar disasters. In this paper, the functions and modelling method for each module are explained and simulation results are presented.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권10호
• /
• pp.418-425
• /
• 2006

This paper describes a simulation package for a power system using objected-oriented programming. The package includes four parts which are a power flow, a short circuit calculation, a transient simulation program, and an economic dispatch. The graphical user interface(GUI) is designed as a common platform which allows the user to create one-line diagrams of systems, specify components of power systems as well as simulation parameters, and view the output produced by the chosen application. The paper presents the data structure of the functional modules such as the draw module, power system data module, the power system simulation module, and the utility module using the object oriented programming. This package may be useful for educational and research purposes.