• Title/Summary/Keyword: Simulation Education

Search Result 1,793, Processing Time 0.029 seconds

Anti-Reactive Jamming Technology Based on Jamming Utilization

  • Xin Liu;Mingcong Zeng;Yarong Liu;Mei Wang;Xiyu Song
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.17 no.10
    • /
    • pp.2883-2902
    • /
    • 2023
  • Since the existing anti-jamming methods, including intelligent methods, have difficulty against high-speed reactive jamming, we studied a new methodology for jamming utilization instead of avoiding jamming. Different from the existing jamming utilization techniques that harvest energy from the jamming signal as a power supply, our proposed method can take the jamming signal as a favorable factor for frequency detection. Specifically, we design an intelligent differential frequency hopping communication framework (IDFH), which contains two stages of training and communication. We first adopt supervised learning to get the jamming rule during the training stage when the synchronizing sequence is sent. And then, we utilize the jamming rule to improve the frequency detection during the communication stage when the real payload is sent. Simulation results show that the proposed method successfully combated high-speed reactive jamming with different parameters. And the communication performance increases as the power of the jamming signal increase, hence the jamming signal can help users communicate in a low signal-to-noise ratio (SNR) environment.

Nursing Students' Experiences of Observing the Use of Physical Restraints: A Qualitative Study (간호대학생의 신체보호대 사용 관찰 경험: 질적 연구)

  • Ha, Sun Mi
    • Journal of Korean Academy of Nursing
    • /
    • v.53 no.6
    • /
    • pp.610-621
    • /
    • 2023
  • Purpose: The purpose of this study was to understand the experiences of final-year undergraduate nursing students in observing the use of physical restraints on patients in the course of clinical practice. Methods: Three focus group interviews were conducted with 12 Korean nursing students who could provide sufficient information about their observation of physical restraints. The collected data was analyzed through conventional content analysis. Results: The data were classified into four theme clusters, and nine themes. The four theme clusters included 'recognized as an unavoidable means,' 'experienced problems with the use of physical restraints,' 'realized the importance of the nurse's role and efforts,' and 'aspire to learn about correct use of physical restraints.' While nursing students recognized the necessities and problems of using physical restraints in clinical practice, and the importance of nurses' role and effort, the results found that education related to the use of physical restraints should be more systematic within the nursing curriculum. Conclusion: This study highlights the necessity of educating nursing students to ensure they acquire accurate knowledge and awareness regarding the use of physical restraints, and suggests the inclusion of systematic guidelines through simulation or extracurricular activities.

Enhancement of Semantic Interoper ability in Healthcare Systems Using IFCIoT Architecture

  • Sony P;Siva Shanmugam G;Sureshkumar Nagarajan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.18 no.4
    • /
    • pp.881-902
    • /
    • 2024
  • Fast decision support systems and accurate diagnosis have become significant in the rapidly growing healthcare sector. As the number of disparate medical IoT devices connected to the human body rises, fast and interrelated healthcare data retrieval gets harder and harder. One of the most important requirements for the Healthcare Internet of Things (HIoT) is semantic interoperability. The state-of-the-art HIoT systems have problems with bandwidth and latency. An extension of cloud computing called fog computing not only solves the latency problem but also provides other benefits including resource mobility and on-demand scalability. The recommended approach helps to lower latency and network bandwidth consumption in a system that provides semantic interoperability in healthcare organizations. To evaluate the system's language processing performance, we simulated it in three different contexts. 1. Polysemy resolution system 2. System for hyponymy-hypernymy resolution with polysemy 3. System for resolving polysemy, hypernymy, hyponymy, meronymy, and holonymy. In comparison to the other two systems, the third system has lower latency and network usage. The proposed framework can reduce the computation overhead of heterogeneous healthcare data. The simulation results show that fog computing can reduce delay, network usage, and energy consumption.

Maximum Power Point Tracking operation of Thermoelectric Module without Current Sensor (전류센서가 없는 열전모듈의 최대전력점 추적방식)

  • Kim, Tae-Kyung;Park, Dae-Su;Oh, Sung-Chul
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.9
    • /
    • pp.436-443
    • /
    • 2017
  • Recently, the development of new energy technologies has become a hot topic due to problems,such as global warming. Unlike renewable energy technologies, such as solar energy generation, solar power, and wind power, which are optimized to achieve medium or above output power, the output power of energy harvesting technology is very small and has not received much attention. On the other hand, as the mobile industry has been revitalized recently, the utility of energy harvesting technology has been reevaluated. In addition, the technology of tracking the maximum power point has been actively researched. This paper proposes a new MPPT(Maximum Power Point Tracking) control method for a TEM(thermoelectric module) for load resistance. The V-I curve characteristics and internal resistance of TEM were analyzed and the conventional MPPT control methods were compared. The P&O(Perturbation and Observation) control method is more accurate, but it is less economical than the CV (Constant Voltage)control method because it usestwo sensors to measure the voltage and current source. The CV control method is superior to the P&O control method in economic aspects because it uses only one voltage sensor but the MPP is not matched precisely. In this paper, a method wasdesigned to track the MPP of TEM combining the advantages of the two control method. The proposed MPPT control method wasverified by PSIM simulation and H/W implementation.

An Analysis on the Contents of STS in the High-School 'Science' Textbooks according to the Curriculum Revised in 2009- Focused on the Unit of 'Evolution of Life' and 'Health of Humanity and Scientific Technology' (2009 개정 교육과정에 따른 고등학교 '과학' 교과서의 STS 내용분석 - '생명의 진화'와 '인류의 건강과 과학기술' 영역을 중심으로 -)

  • Jeong, Kyeong-Ha;Son, Yeon-A;Kim, Dong-Ryeul
    • Journal of Science Education
    • /
    • v.39 no.3
    • /
    • pp.343-357
    • /
    • 2015
  • The present study aims to analyze the extent of the use of STS contents in the areas of 'Evolution of Life' and 'Health of Humanity and Scientific Technology' in 'Science' textbooks and to determine whether they meet the goals of the curriculum revised in 2009. The analysis of the 7 types of textbooks according to the STS topics areas indicated big differences between textbooks as little as 16.67% and as much as 58.33%. Also, among the topics associated with STS, 'Space Development and National Defense' and 'Environmental Problems' were not included. In the STS activity areas, the areas of 'Structured Debate,' 'Interpretation of Data,' 'Research and Investigation' showed great frequency. On the other hand, the STS activity areas of 'Field Activities,' 'Problem-solving and Decision-making,' 'Role Playing,' 'Simulation,' 'Case Study,' and 'Research Design' showed small frequency. Analysis of the STS contents for each area indicated 67.57% for the contents relevant to 'the applicability of science' accounting for the largest part whereas 'Understanding of Occupations related to Science' accounted for 1.63%, showing a great difference in their frequency. Seven standards except 'the applicability of science' were included each contents beyond 10% or less than 10% proportion. The STS contents included in the life science area of the 7 types of convergence-style 'Science' textbooks for the high-school accounted for an average of 20.75%, from as little as 12.35% to as much as 26.90%, depending on the publishes.

  • PDF

Single-phase Control Algorithm of 4-Leg type PCS for Micro-grid System (마이크로그리드용 4-Leg 방식 PCS의 각상 개별제어 알고리즘에 관한 연구)

  • Kim, Seung-Ho;Choi, Sung-Sik;Kim, Seung-Jong;Rho, Dae-Seok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.18 no.11
    • /
    • pp.817-825
    • /
    • 2017
  • The AC-common bus microgrid system can overcome several weaknesses of the DC microgrid system by interconnecting the DC/AC inverters used for renewable energy with an AC network. Nevertheless, the unbalanced loads inherent in the electric power systems of island and small communities can deteriorate the performance of the AC microgrid system. This is because of the limited voltage regulation capability and mixed power flow in the voltage source inverter. In order to overcome the unbalanced load condition, this paper proposes a voltage and current control algorithm for the 4-leg inverter based on the single phase d-q control method, as well as the modeling of the voltage controller using Matlab/Simulink S/W. From the S/W simulation and experiment of the 250KW proto-type inverter, it is confirmed that the proposed algorithm is a useful tool for the design and operation of the AC microgrid system.

Analyzing of CDTA using a New Small Signal Equivalent Circuit and Application of LP Filters (새로운 소신호 등가회로를 활용한 CDTA의 해석 및 저역통과 필터설계)

  • Bang, Junho;Song, Je-Ho;Lee, Woo-Choun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.15 no.12
    • /
    • pp.7287-7291
    • /
    • 2014
  • A CDTA (current differencing transconductance amplifier) is an active building block for current mode analog signal processing with the advantages of high linearity and a wide frequency bandwidth. In addition, it can generate a stable voltage because all the differencing input current flows to the grounded devices. In this paper, a new small signal equivalent circuit is proposed to analyze a CDTA. The proposed small signal equivalent circuit provides greater precision in analyzing the magnitude and frequency response than its previous counterparts because it considers the parasitic components of the input, internal and output terminal. In addition, observations of the changes made in various devices, such as the resistor (Rz) confirmed that those devices heavily influence the characteristics of CDTA. The designed parameters of the proposed small signal equivalent circuit of the CDTA provides convenience and accuracy in the further design of analog integrated circuits. For verification purposes, a 2.5 MHz low pass filter was designed on the HSPICE simulation program using the proposed small signal equivalent circuit of CDTA.

A Study on Relationship of Computer Games and Study Achievement (컴퓨터 게임과 학업성취도와의 관계 연구)

  • Koo, Sung-Ok;Maeng, Seung Ryol;Yoo, Kwan-Hee
    • The Journal of Korean Association of Computer Education
    • /
    • v.8 no.4
    • /
    • pp.79-86
    • /
    • 2005
  • Educational objectives are the most important items because not only they must be decided first in the circulation process of curriculum but also they should be the basis for the process of curriculum. The establishment of objectives is very important because it can determine success or failure of computer education. In this paper, questionnaire research is conducted and analyzed for male students of middle schools in Chungbuk province, Korea to determine that it's reasonable for computer games to be perceived negatively. The results of the research are as follows. 48% of them are represented to play computer game almost everyday, and 8% to play it scarcely. So most of students are enjoying it regardless of their grade. If students whose grades are ranked upper level start playing games, they're tend to quit it within 1 or 2 hours. And they enjoy role-playing or simulation game. In general, they do not play action games. If their grades are ranked lower level start playing games, a lot of them continue to play longer than 3 hours like game addict. And in this level, there exist students who barely play games. In middle level, there are no apparent characteristics. According to the result of the research, there is no correlation between frequency of playing games and academic achievements. So it's no problem to relieve worries if one often play computer games, his or her grade will get down. In case that the grades of students are ranked upper level, however, there are few who continue to play games longer than 3 hours.

  • PDF

Effects of Nursing Students' Knowledge, Attitude and Nursing Professionalism on Confidence in Performance of Patient Safety (졸업학년 간호대학생의 환자안전 지식, 태도 및 간호전문직관이 환자안전 수행자신감에 미치는 효과)

  • Park, Su-Jin;Choi, Hyo-Sin;Kim, Jeong-Yun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.20 no.9
    • /
    • pp.341-350
    • /
    • 2019
  • This research study was conducted to investigate the effect of knowledge, attitude and nursing professionalism on the confidence of the performance of nursing students who had experience with clinical practice and also to provide basic data for the development of nursing students' curriculum. The subjects who participated in this study were 286 students in the 4th year of nursing at two colleges in the Daegu and Gyeongbuk regions. The research data was analyzed using the SPSS 22.0 program. Confidence in performance of patient safety was higher for the women than for men, and for the students of an older age and higher academic achievement. Confidence in performance of patient safety was positively related to knowledge (r=.25, p=.000), attitude (r=.39, p=.000), nursing professionalism (r=.33, p=.000) and all these had statistical significance. On the multiple regression analysis, the coefficient of determination ($R^2$) was .49 and the explanatory power of the model was 49.2% (F=24.04, p=.000). The most important factor affecting confidence in performance of patient safety was the experience of having undergone patient safety education. Based on these results, it is necessary to seek various educational methods to expand the concept of patient safety from the beginning of the undergraduate course work. Especially, we think that various education strategies such as simulation education methods or information videos are needed to develop scenarios related to patient safety.

A Study on Modeling of Leakage Current in ESS Using PSCAD/EMTDC (PSCAD/EMTDC를 이용한 ESS의 누설전류 모델링에 관한 연구)

  • Kim, Ji-Myung;Tae, Dong-Hyun;Lee, Il-Moo;Lim, Geon-Pyo;Rho, Dae-Seok
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.2
    • /
    • pp.810-818
    • /
    • 2021
  • A leakage current of ESS is classified mainly by the occurrence from a PCS(Power Conditioning System) section and an unbalanced grid current. The reason for the leakage current from the PCS section is a voltage change by IGBT (Insulated Gate Bipolar Transistor) switching and stray capacitance between the IGBT and heatsink. The leakage current caused by the grid unbalanced current flows to the ESS through the neutral line of grid-connected transformer for the ESS with a three limb iron type of Yg-wire connection. This paper proposes a mechanism for the occurrence of leakage current caused by stray capacitance, which is calculated using the heatsink formula, from the aspect of the PCS section and grid unbalance current. Based on the proposed mechanisms, this study presents the modeling of the leakage current occurrence using PSCAD/EMTDC S/W and evaluates the characteristics of leakage currents from the PCS section and grid unbalanced current. From the simulation result, the leakage current has a large influence on the battery side by confirming that the leakage current from the PCS is increased from 7[mA] to 34[mA], and the leakage current from an unbalanced load to battery housing is increased from 3.96[mA] to 10.76[mA] according to the resistance of the housings and the magnitude of the ground resistance.