• 패션비즈니스
• /
• 제15권3호
• /
• pp.97-111
• /
• 2011

This study aims to apply 3D virtual fabric parameters - as obtained from previous research experiments - to 3D virtual clothing simulation in comparing its similarity with actual clothing as worn, with a view to verifying the objectivity and validity of the 3D virtual fabric simulation method devised by the drape image analysis method. In addition, the result is intended to be used as the basic data for new 3D virtual clothing simulation methods. As the results, 3D virtual fabric parameters designed to simulate 3D drape to be similar to actual fabrics were found to be Bending Strength, Buckling Point, Density, Particle Distance, and Shear. They were also found to be important measurements when evaluating visual similarity between drape shadow images and number of nodes. 3D virtual fabric simulation method devised by the drape image analysis method was appropriate in extracting 3D fabric parameters with the reflection of actual fabrics' physical and dynamic characteristics, in connection with 3D virtual fabric simulation. 3D virtual fabric parameters with the reflection of actual fabrics' physical and dynamic characteristics using the proposed 3D virtual fabric simulation method are accumulated and provided as a standard, this will facilitate the introduction 3D virtual fabric simulation technology.

• 한국조경학회지
• /
• 제35권2호통권121호
• /
• pp.55-63
• /
• 2007

The purpose of this study is to create a planting design for progressive realization. For this, visual preferences as measured via questionnaire were evaluated by the Scenic Beauty Estimation(SBE) and paired comparison methods. The results can be summarized as follows. Through photo observation, the average visual blockage ratio was 38% and the range of degree of the visual blockage ratio was $30{\sim}50%$. The sketch simulation and filtered pattern received the highest preference score and fumed out to be the most practical pattern out of all the patterns evaluated. Also, in the sketch simulation, the high preference values were observed for a distance of 9 to 12m from the view point to the blockage tree with a D/H ratio of 2. The preference score significantly decreased with the increase of the visual blockage ratio having a turning point at $30{\sim}35%$ of the visual blockage ratio, even though the distance parameters were more important than the visual blockage ratio in the scores. An outstanding view must be handled properly to be preserved or accentuated. Framed, open, enclosed, screened or filtered pattern views should be completely revealed only from their best vantage point, not given away at first glimpse. It this sense, parallax spatial beauty with trees could be improved through the visual aspects of plan arrangements and seems to be an effective design technique for landscape planning and planting design.

• 산업공학
• /
• 제13권3호
• /
• pp.424-430
• /
• 2000

Supply chain management (SCM) is an area that has recently received a great deal of attention in the business community. While SCM is relatively new, the idea of coordinated planning is not. During the last decades, many researchers have investigated multi-stage inventory problems. However, only a few papers address the problem of cost-optimal coordination of multi-stage inventory control with respect to service measures. Even published approaches have a shortcoming in dealing with a delivery lead time consisted of a shipping time and a waiting time. Assumed that there is no waiting time, or that the delivery lead time is implicitly compounded of a shipping time and a waiting time, the problem is often simplified into a multi-stage buffer allocation and a single-stage stochastic buffer sizing problem at all installations. This paper presents a simulation-based heuristic algorithm and a comparison with others for the problem that cannot be decomposed into a multi-stage buffer allocation and a single-stage stochastic buffer sizing problem because the waiting time ties together all stages. The comparison shows that the simulation-based heuristic algorithm performs better than other approaches in saving average inventory cost for both Poisson and Normal demands.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.110-115
• /
• 2002

In this paper, the results of an analysis of the dynamic behavior of the eddy current brake(ECB) system are presented. The measured irregularity of the track in Korean high speed line and the track irregularity given by ERRI(high level) were used for simulation. The wheel-rail profile combination were analyzed with different rail gauges. A model of the bogie with an substitute body for the carbody was implemented in the Multi-body-Simulation Program SIMPACK. The ECB frame was modelled both as flexible body and as rigid body. Four different driving conditions were analyzed. In this study dynamic behavior in general were performed to evaluate the design of eddy current brake system and specially the effect of damper was also studied. A comparison of simulations with and without damper shows that the damper have most effect for lower speed. The simulation results will be verified by comparison with measured data from on line test and also used for improving design.

• 한국조경학회지
• /
• 제29권5호
• /
• pp.20-27
• /
• 2001

The purpose of this study is to investigate and compare the validity and the reliability of the visual simulation method using the internet. For this. the evaluation of the artificial and natural landscape through the medium of color slides are compared with the internet survey. Data is analysed through the comparison of t-test between the two media by landscape type, and spatial image is analysed by factor analysis algorithm. Principle component analysis using Varimax Method is applied for extraction and factor rotation respectively. The results of this study can be summarized as follows; There are no statistical differences between the two methods with artificial and natural landscape in the total data that included second tests. Factors covering the spatial image are found to be \`aesthetic\`, \`spatial shape\`, and \`familiarity\`. Total variance is obtained as 66.4%. There are no statistical differences between the two methods in 2/3 of the cases. In the case of far view of artificial landscape, the results of the t-test show that the two methods are exactly the same. Especially in the case of the artificial far landscape shows no difference of all factors between two methods. There are no differences between first and second tests of the same media and the same landscape type. And it shows the reliability of this method. These results suggest that the probability that the internet can be used as a medium of landscape evaluation and gathering information on anyone\`s landscape image. Simulation techniques with the internet survey method should be further developed for practical application.

• 한국태양에너지학회 논문집
• /
• 제34권5호
• /
• pp.11-22
• /
• 2014

It is usual to determine silver-town location by people's experienced knowledge or intuition considering many different type of thematic variables simultaneously. This paper is primarily intended to locate sunny silver-town according to catchment-wide solar radiation as single key variable. GIS based solar simulation realistically identified catchment-wide solar radiation in the study area using large scale spatial precision. More than 90% over the worst catchment were identified shadow surfaces while the optimal catchment was heavily covered by sunny radiation surfaces. It is confirmed that standard GIS technology can offers the viable method of measuring and comparing the catchment-wide solar radiation. Guidelines for a replicable methodology are presented to provide a strong theoretical basis for the standardization of factors involved in locating the sunny silver-town; delineation of catchment boundary, solar simulation, catchment-wide comparison etc. They could be used as an evidence to determine sunny catchment in comparison with other catchment, based solar simulation. It is anticipated that this research output could be used as a valuable reference to confirm the potential of introducing the new concept of "catchment specific solar radiation" to support more scientific and objective decision-making in the process of locating silver town.

• 천문학회보
• /
• 제41권1호
• /
• pp.47.2-47.2
• /
• 2016

The protons and helium ions in the solar wind are observed to possess anisotropic temperature profiles. The anisotropy appears to be limited by various marginal instability conditions. One of the efficient methods to investigate the global dynamics and distribution of various temperature anisotropies in the large-scale solar wind models may be that based upon the macroscopic quasi-linear approach. The present paper investigates the proton and helium ion anisotropy instabilities on the basis of comparison between the quasi-linear theory versus particle-in-cell simulation. It is found that the overall dynamical development of the particle temperatures is quite accurately reproduced by the macroscopic quasi-linear scheme. The wave energy development in time, however, shows somewhat less restrictive comparisons, indicating that while the quasi-linear method is acceptable for the particle dynamics, the wave analysis probably requires higher-order physics, such as wave-wave coupling or nonlinear wave-particle interaction. We carried out comparative studies of proton firehose instability, aperiodic ordinary mode instability, and helium ion anisotropy instability. It was found that the agreement between QL theory and PIC simulation is rather good. It means that the quasilinear approximation enjoys only a limited range of validity, especially for the wave dynamics and for the relatively high-beta regime.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.15-22
• /
• 2011

In this paper, cavitation patterns of model tests were compared with those of full-scale measurement for a propeller of crude oil carrier which was suffered from erosions on suction side of blade tip region. Cavitation tests were performed at design and ballast draft using model and full scale nominal wakes. A model ship and wire mesh method was used for the simulation of wake patterns of model nominal wakes. For the prediction of full-scale wake patterns, a RANS solver(Fluent 6.3) was used and wire mesh method was used for the simulation of the full scale wakes. Comparison results show that cavitation patterns using predicted full-scale wake patterns are closer to cavitation patterns of full-scale measurement at ballast draft condition. Also, cloud cavitations were observed on the position of eroded area at both full-scale measurement and cavitation tests using simulated full-scale wake patterns.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.53-61
• /
• 2004

Condenser tube which is used for a cooling system of automobiles is mainly manufactured by conform extrusion. However, direct extrusion using porthole die in comparison with conform extrusion has many advantages such as improvement of productivity, reduction of production cost etc. In general, the porthole die extrusion process is useful for manufacturing long tubes with hollow sections and consists of three stages(dividing, welding and forming stages). Especially, Porthole die for producing condenser tube is very complex. Thus, in order to obtain the detailed mechanics, to assist in the design of proper die shapes and sizes, and to improve the quality of products, porthole die extrusion should be analyzed in as non-steady state as possible. This paper describes FE analysis of non-steady state porthole die extrusion for producing condenser tube with multi-hole through 3D simulation in the non-steady state during the entire process to evaluate detailed metal flow, temperature distribution, welding pressure and extrusion load. Also to validate FE simulation of porthole die extrusion, a comparison of simulation and experiment results was presented in this paper.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4652-4659
• /
• 2022

Among the detector materials available at room temperature, thallium bromide (TlBr), which has a relatively high atomic number and density, is widely used for gamma camera imaging. This study aimed to verify the usefulness of TlBr through quantitative evaluation by modeling detectors of various compound types using Monte Carlo simulations. The Geant4 application for tomographic emission was used for simulation, and detectors based on cadmium zinc telluride and cadmium telluride materials were selected as a comparison group. A pixel-matched parallel-hole collimator with proven excellent performance was modeled, and phantoms used for quality control in nuclear medicine were used. The signal-to-noise ratio (SNR), contrast to noise ratio (CNR), sensitivity, and full width at half maximum (FWHM) were used for quantitative analysis to evaluate the image quality. The SNR, CNR, sensitivity, and FWHM for the TlBr detector material were approximately 1.05, 1.04, 1.41, and 1.02 times, respectively, higher than those of the other detector materials. The SNR, CNR and sensitivity increased with increasing detector thickness, but the spatial resolution in terms of FWHM decreased. Thus, we demonstrated the feasibility and possibility of using the TlBr detector material in comparison with commercial detector materials.