• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.7 s.178
• /
• pp.1753-1762
• /
• 2000

An inverse method is presented to obtain material's flow properties by using small punch test. This procedure employs, as the objective function of inverse analysis, the balance of measured load-di splacement response and calculated one during deformation. In order to guarantee convergence to global minimum, simulated annealing method was adopted to optimize the current objective function. In addition, artificial neural network was used to predict the load-displacement response under given material parameters which is the most time consuming and limits applications of global optimization methods to these kinds of problems. By implementing the simulated annealing for optimization along with calculating load-displacement curve by neural network, material parameters were identified irrespective of initial values within very short time for simulated test data. We also tested the present method for error-containing experimental data and showed that the flow properties of material were well predicted.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.3
• /
• pp.189-194
• /
• 2004

This paper proposes a Simulated Annealing(SA) algorithm for cluster-based Multicast Routing problems. Multicasting, the transmission of data to a group, can be solved from constructing multicast tree, that is. the whole network is partitioned to some clusters and the clusters are constructed by multicast tree. Multicast tree can be constructed by minimum-cost Steiner tree. In this paper, an SA algorithm is used in the minimum-cost Steiner tree. Especially, in SA, the cooling schedule is an important factor for the algorithm. Hence, in this paper, a cooling schedule is proposed for SA for multicast routing problems and analyzed the simulation results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.8 s.101
• /
• pp.911-917
• /
• 2005

There were many attempts to reduce noise behind the noise barrier using active control techniques. Omoto(1993) Shao(1997) and Yang(2001) tried to actively control the diffracted noise behind the barrier and main concerns were about the arrangement methods for the control sources. Baek (2004) tried to get better results using the simulated annealing method and the sequential searching technique. The main goal of this study is to develop and compare the performance of several optimization techniques including those mentioned above, hybrid version of simulated annealing and genetic algorithm for the optimal control source positions of active noise barrier system. The simulation results show fairly similar performance lot the small size of searching problem. However, as the number of control sources are increased, the performance of simulated annealing algorithm and genetic algorithm are better than the others. Simulations are also made to show the performance of the selected optimal control source positions not only at the receiver position but at the surrounding volume of the receiver position and plotted the noise reduction level in 3-D.

• Journal of Korean Institute of Industrial Engineers
• /
• v.27 no.3
• /
• pp.315-327
• /
• 2001

This paper considers the problem of operation sequencing in nonlinear process planning, which is the problem of selecting and sequencing operations required to produce a part with the objective of minimizing the sum of operation processing costs and machine, setup and tool change costs. Main constraints are the precedence relations among operations. The problem can be decomposed into two subproblems: operation selection and operation sequencing. We suggest four simulated annealing algorithms, which solve the two subproblems iteratively until a good solution is obtained. Here, the operation selection problem can be solved using a shortest path algorithm. Application of the algorithms is illustrated using an example. Also, to show the performances of the suggested algorithms, computational experiments were done on randomly generated test problems and the results are reported. In particular, one of the suggested algorithms outperforms an existing simulated annealing algorithm.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.2
• /
• pp.18-22
• /
• 2012

This paper presents a method and the experimental measurement system for the determination of Jiles-Atherton model parameters of the 30ZH120 electrical steel sheet. The paper utilizes Epstein Square devices to proceed with the experiment and measurement on a group of hysteresis loops of some certain transformers which use the 30ZH120 electrical steel sheet under two different lap ways. The approach relies on the simulated annealing optimization method in order to minimize the error between the measured and modeled hysteresis curves and yield the best five Jiles-Atherton model parameters. A convenient program, based on the Simulink platform, that can identify the J-A model parameters automatically from the experimental saturated hysteresis loop which is used to model the nonlinear characteristics of the electrical steel sheet, is developed. Research shows that the simulated annealing optimization method gets satisfactory results.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.423-426
• /
• 2013

본 연구에서는 임분 단위에서 산림의 이산화탄소 흡수 및 저장 기능을 최적화 할 수 있는 최적의 산림시업체계를 도출하고자하였고, 이를 위해 임분 생장모델과 Simulated Annealing 휴리스틱 기법을 적용하여 임분탄소 최적화 프로그램을 개발하였다. 휴리스틱 알고리즘에서 최적해를 찾기 위해 반복 실행 되는 과정에서 더 이상 최적해을 찾지 못하고 목표 값이 어떤 일정한 값(Local Optimum)에 계속 머무는 현상을 해결하기 위해 임계치를 적용하며, SA 휴리스틱 기법에서는 열균형테스트를 이용하고 있다. 개발된 프로그램을 이용하여 3가지 산림 시업 시나리오에 대한 비교 분석을 실시하기 위해 프로그램을 실행한 결과, 목재수확량의 경우 목재수확량을 최대를 목표로 한 대안이 3개 시나리오 가운데 목재수확량이 가장 높은 것으로 나타났으며, 또한 탄소저장량에서도 탄소저장량을 최적화한 대안이가 탄소저장량이 가장 높은 것으로 나타나 프로그램이 목적에 맞게 개발된 것으로 판단됐다. 또한 열균형 테스트의 온도저감율을 조정하여 프로그램을 반복실행하여 온도저감율이 프로그램 실행 시에 미치는 영향을 분석한 결과 온도저감율에 따라 출력되는 목적함수의 최적값과 프로그램 반복횟수가 영향을 받는 것으로 나타나 프로그램 실행을 최적으로 하기위해 온도 저감율의 파라미터 값을 0.1로 설정하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.319-322
• /
• 1995

As a trend toward multi-product batch processes is increasing in Chemical Process Industry (CPI), multi-product batch scheduling has been actively studied. But the optimal production scheduling problems for multi-product batch processes are known as NP-complete. Recently Ku and Karimi [5] have studied Simulated Annealing(SA) and Jung et al.[6] have developed Modified Simulated Annealing (MSA) method which was composed of two stage search algorithms for scheduling of batch processes with UIS and NIS. Jung et al.[9] also have studied the Common Intermediate Storage(CIS) policy which have accepted as a high efficient intermediate storage policy. It can be also applied to pipeless mobile intermediate storage pacilities. In spite of these above researches, there have been no contribution of scheduling of CIS policy for chemical batch processes. In this paper, we have developed another MSA for scheduling chemical batch processes with searching the suitable control parameters for CIS policy and have tested the this algorithm with randomly generated various scheduling problems. From these tests, MSA is outperformed to general SA for CIS batch process system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.2
• /
• pp.112-118
• /
• 1995

In designing assembly lines, it is required that the lines should not only meet the demand of the product, but also minimize the assembly cost associated with the line. For such a purpose, numerous research efforts have been made on either the assembly sequence generation or the assembly line balancing. However, the works dealing with both the research problems have been seldom reported in literature. When assembly sequences are generated without consideration of line balancing, additional cost may be incurred, because the sequences may not guarantee the minimum number of workstations. Therefore, it is essential to consider line balancing in the generation of cost-effective assembly sequences. To incorporate the two research problems into one, this paper treats a single-model and deterministic (SMD) assembly line balancing (ALB) problem, and proposes a new method for generating line-balanced robotic assembly sequences by using a simulated annealing. In this method, an energy function is derived in consideration of the satisfaction of assembly constraints, and the minimization of both the assembly cost and the idle time. Then, the energy function is iteratively minimized and occasionally perturbed by the simulated annealing. When no further change in energy occurs, an assembly sequence with consideration of line balancing is finally found. To show the effectiveness of the proposed scheme, a case study for an electrical relay is presented.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.7
• /
• pp.313-322
• /
• 2000

This paper presents optimal placement of minimal set of Phasor Measurement Units (PMU's) and observability analysis of the network with PMU's. In order to find a observable system, a symbolic method which directly assigns an appropriate symbol for measurement or pseudo-measurement to every entry of node-branch incidence matrix is proposed. It is much simpler and easier to analyze the observability of the network with PMU's than the conventional ones. For the optimal PMU placement problem, two approaches which are based on a modified Simulated-Annealing (SA) method and a Direct Combination method are proposed. Some case studies with IEEE sample system are made to show the performance of the proposed methods are almost alike and more effective than the conventional simulated-annealing method. It is also shown that the Direct Combination method is more effective than the modified simulated-annealing one in the sense of computation burden. The results of this study showed also that the accuracy of power system estimation and system observability can be improved the proposed PMU placements.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.97-102
• /
• 2001

In computer-aided design, partitioning is task of clustering objects into groups to that a given objection function is optimized It is used at the layout level to fin strongly connected components that can be placed together in order to minimize the layout area and propagation delay. Partitioning can also be used to cluster variables and operation into groups for scheduling and unit selection in high-level synthesis. The most popular algorithms partitioning include the Kernighan-Lin algorithm Fiduccia-Mattheyses heuristic and simulated annealing In this paper we propose a genetic algorithm searching solution space for the circuit partitioning problem. and then compare it with simulated annealing by analyzing the results of implementation.