Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Inverse Analysis Approach to Flow Stress Evaluation by Small Punch Test

소형펀치 시험과 역해석에 의한 재료의 유동응력 결정

  • Published : 2000.07.01
Download PDF
⟨ Previous Next ⟩

Abstract

An inverse method is presented to obtain material's flow properties by using small punch test. This procedure employs, as the objective function of inverse analysis, the balance of measured load-di splacement response and calculated one during deformation. In order to guarantee convergence to global minimum, simulated annealing method was adopted to optimize the current objective function. In addition, artificial neural network was used to predict the load-displacement response under given material parameters which is the most time consuming and limits applications of global optimization methods to these kinds of problems. By implementing the simulated annealing for optimization along with calculating load-displacement curve by neural network, material parameters were identified irrespective of initial values within very short time for simulated test data. We also tested the present method for error-containing experimental data and showed that the flow properties of material were well predicted.

Keywords

References

  1. Lucas, G. E., 1990, 'Review of Small Specimen Test Techniques for Irradiation Testing,' Metallurgical Transactions A, Vol. 21A, pp. 1105-1119 https://doi.org/10.1007/BF02698242
  2. 박종진, 유효선, 정세희, 1996, '고온부재의 재질열화에 따른 응력부식균열 평가에 관한 연구,' 대한기계학회논문집 A, 20 권, 4 호, pp. 73-80
  3. Manahan, M. P., 1983, 'New Postirradiation Mechanical Behavior Test - The Miniaturized Disk Bend Test,' Nuclear Technology, Vol. 63, pp. 295-315
  4. Cheon, J. S. and Kim, I. S., 1996, 'Initial deformation during small punch testing,' Journal of Testing and Evaluation, Vol. 24, pp. 255-262
  5. Foulds, J. R. et al., 1995, 'Small Punch Testing for Fracture Toughness Measurement,' Electric Power Research Institute Report, EPRI TR-105130
  6. Kubo, S., 1988, 'Inverse Problems Related to the Mechanics and Fracture of Solids and Structures,' JSME International Journal, Series I, Vol. 31, pp. 157-166
  7. Michino, M., Tanaka,M. and Kitaoka, T., 1996, 'Determination of Flow Stress by Inverse Analysis Using FEM,' Journal of the JSTP, Vol. 37, pp. 219-224
  8. Osakada, K., Shirashi,M., Muraki, S. and Tokuoka, M., 1991, 'Measurement of Flow Stres by the Ring Compression Test,' JSME International Journal, Series I, Vol. 34, pp. 312-318
  9. 천진식, 1998, '소형펀치 시험과 최적화 기법에 의한 재료의 유동응력 예측,' 한국중공업 기술제안 보고서
  10. Kirkpatrick, S., Gelatt, C. and Vecchi, M., 1983, 'Optimization by Simulated Annealing,' Science, Vol. 220, pp. 671-680 https://doi.org/10.1126/science.220.4598.671
  11. Moerder, D. D. and Pamadi, B. N., 1994, 'Constrained Minimization of Smooth Functions Using a Genetic Algorithm,' NASA Technical Paper 3329
  12. Yoshimura, S., Hishida, H. and Yagawa, G., 1993, Parameter Determination of Inelastic Constitutive Equations by Means of Neural Network,' Transactions of the Japan Society of Mechanical Engineering, Part A, Vol. 59, pp. 518-525
  13. Furukawa, T. and Yagawa, G., 1997, 'Inelastic Constitutive Parameter Identification Using an Evolutionary Algorithm with Continuous Individuals,' International Journal of Numerical Methods and Engineering, Vol. 40, pp. 1071-1090 https://doi.org/10.1002/(SICI)1097-0207(19970330)40:6<1071::AID-NME99>3.0.CO;2-8
  14. Rao, S. S., 1996, Engineering Optimization: Theory and Practice, John Wiley & Sons, Inc., New York
  15. Starck, V., 1996, Implementation of Simulated Annealing Optimization Method for APLAC Circuit Simulator, M.S. thesis, Helsinki University of Technology
  16. Hagan, M. T., Demuth H. B. and Beale, M., 1996, Neural Network Design, PWS Publishing Company, Boston
  17. Yoshimura, S., Matsuda, A. and Yagawa, G., 1996, 'New Regularization by Transformation for Neural Network Based Inverse Analyses and Its Application to Structure Identification,' International Journal of Numerical Methods and Engineering, Vol. 39, pp. 3953-3968 https://doi.org/10.1002/(SICI)1097-0207(19961215)39:23<3953::AID-NME31>3.0.CO;2-O
  18. ABAQUS/Standard Version 5.7, 1997, Hibbit, Karlsson and Sorensen Inc.
  19. Dieter, G. E., 1996, Mechanical Metallurgy, McGraw-Hill Book Company, New York
  20. Demuth, H. B. and Beale, M., 1994, Neural Network Toolbox, The Mathworks Inc.
  21. Scale J. A. and Smith, M. L., 1996, Introductory Geophysical Inverse Theory: Part I, Samizdat Press
  22. Schnur, D. S. and Zabaras, N., 1992, 'An Inverse Method for Determining Elastic Material Properties and a Material Interface,' International Journal of Numerical Methods and Engineering, Vol. 33, pp. 2039-1057 https://doi.org/10.1002/nme.1620331004
  23. Haggag, F.M., 1993, 'In-Situ Measurements of Mechanical Properties Using Novel Automated Ball Identation System,' ASTM STP 1024, pp. 27-44