• 상하수도학회지
• /
• 제22권1호
• /
• pp.3-14
• /
• 2008

ASM No. 2(Activated sludge model No. 2) is very useful model to analyze the wastewater treatment which removes nitrogen and phosphorus. But, it is difficult to apply ASM No. 2 to control of wastewater treatment since it has 17 material divisions and 46 parameters. So the purpose of this study was the simplification of ASM No. 2 and the provement of simplification model. Firstly ASM No. 2 was simplified with 5 material division and three phases(Anaerobic, aerobic, anoxic phases). The simplified model was proved by R-square using track study data. As a result of provement, the values of R-square in ${NH_4}^+$ were 0.9815 in ASM No. 2 and 0.9250 in simplified model and in ${NO_3}^-$ were 0.8679 in ASM No. 2 and 0.7914 in simplified model and in ${PO_4}^{3-}$ are 0.9745 in ASM No. 2 and 0.9187 in the simplified model when the ability to express the material variation was compared by R-square. So, the simplified model has enough ability to express the variation of ${NH_4}^+$, ${NO_3}^-$ and ${PO_4}^{3-}$.

• 전기학회논문지
• /
• 제61권1호
• /
• pp.173-178
• /
• 2012

The quantity bill writing of organized electrical construction can be an effective to quality and process management in the construction. Therefore, in order to overcome confusion of the construction and doing an effective work, the clearly quantity bill writing is need. This paper is a focused to solve a problem of existing quantity bill as the difference in terms of work section and item information, regulatory information of ordering authority. Therefore, a terms of work section and item information, regulatory information of ordering authority has been normalized. Moreover, basic data of simplification for quantity bill writing and structure has been guaranteed.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1333-1344
• /
• 2019

An integrated approach of model simplification for high burnup spent nuclear fuel is proposed based on material calibration using optimization. The spent fuel rods are simplified into a beam with a homogenous isotropic material. The proposed approach of model simplification is applied to fuel rods with two kinds of interfacial configurations between the fuel pellets and cladding. The differences among the generated models and the effects of interfacial bonding efficiency are discussed. The strategy of model simplification adopted in this work is to force the simplified beam model of spent fuel rods to possess the same compliance and failure characteristics under critical loads as those that result in the failure of detailed fuel rod models. It is envisioned that the simplified model would enable the assessment of fuel rod failure through an assembly-level analysis, without resorting to a refined model for an individual fuel rod. The effective material properties of the simplified beam model were successfully identified using the integrated optimization process. The feasibility of using the developed simplified beam models in dynamic impact simulations for a horizontal drop condition is examined, and discussions are provided.

• 상하수도학회지
• /
• 제21권4호
• /
• pp.409-420
• /
• 2007

ASM No. 1 is a very useful model to analyze wastewater treatment system removing organic carbon and nitrogen material. But it isn't adequate to control the wastewater treatment system with real time since it has many material divisions and parameters. So, the purpose of this study is the simplification of ASM No. 1 to control the wastewater treatment system. ASM No. 1 was changed with the model which has 3 material divisions(COD, $NH_4{^+}$, $NO_3{^-}$) and two phases(Aerobic and Anoxic condition). SBR was running with two phases(Phase I and II). Phase II running 20 minutes with aerobic time was used for deciding model parameters and Phase I running 12 minutes with aerobic time was used for proving the simplified model. The simplified model was compared with ASM No. 1 using data of Phase I and II. As a result of model comparison, the simplified model has enough ability to express the variation of $NH_4{^+}$ compound.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.555-561
• /
• 2024

This paper derives material properties of steel bars that simulate the distribution of stress and strain of prestressed tendons used in Prestressed concrete(PSC) girders and presents an optimal material model. ABAQUS software was used to establish the 3D solid model of the PSC girder and strand wire rope for a PS(Prestressed) tendon. Then the model of steel wire rope was imported into the Isight interface plugin directly through the ABAQUS and the Data Matching. In ABAQUS, the contact pairs were established, the models were meshed, the constraints were applied to solve the finite element model and an axial tension of 0.5m/s was loaded to analyze the stress and deformation distributions in the normal working range of the PS strand wire rope. In Data Matching, classical experimental data is fitted to the optimal material properties through finite element analysis and multi-objective optimization. The results show that the steel bar with optimal material properties presents a similar linear area and stress distribution with the PS tendon.

• 공기청정기술
• /
• 제18권1호통권68호
• /
• pp.53-78
• /
• 2005

Construction work is an art of making something out of nothing. To run the construction project smoothly, budget, organization and engineering should be balanced. Standardization and simplification of construction bill are needed in order to maximize the

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.199-199
• /
• 2010

A back-gated MOSFET on silicon-on-insulator (SOI) substrate for pH sensor was investigated. We used concentrations of pH solution from 6 to 9. The fabricated back-gated MOSFET has current difference and threshold voltage shift by pH concentrations. Therefore, It can be used to simplification of conventional pH sensor.

• 복식문화연구
• /
• 제12권4호
• /
• pp.497-510
• /
• 2004

This research shows problems of modem Mourning Garments used in Gwangju area compared to traditional ones. Researches are as fellowed; First, items of mourning garments have been not used by degrees. Male has worn Jung-Dan and Du-ru-mak-i as Pyo-Eui of male mourning garments. Second, mourning garments have been simplified and modified. These simplification in shape and uniformity in size are only far Mass production and convenient manufacture. Third, modem mourning garments are made of 6-su (thin) Hemp cloth. In fact this material has no hemp and is just made of cotton and chemical textiles. Even though it is not made of hemp, it has been sold with the name of Hemp Cloth. Materials should be clearly listed. Forth, traditional mourning garments are manufactured through needlework while modern ones through mass production. Now the former is expensive rather than the latter. So Mass produced garments would be preferred to traditional made ones.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2059-2063
• /
• 2004

Most power plants have operated many independent computerize systems for maintenance. Independence of systems have caused complexity of business process and inconvenience of computer system management. Because the equipment and material master data is not standardize and structurize, it is difficult to manage equipment maintenance history and material delivery. Especially equipment classification criterion is important for standardization of every maintenance information. It is necessary to integrate function of independent systems for business process simplification and rapid work flow. this paper provides equipment classification criterion design and system integration method with the case of live system development.

• 청정기술
• /
• 제19권2호
• /
• pp.173-183
• /
• 2013

전 세계적으로 자원순환 효율성 증대 및 에너지 절감을 위해 친환경제품 설계, 재활용, 재제조 등 다양한 방법론이 제시되고 있다. 본 논문은 하나의 방안으로 유니소재화에 대해서 제시하고 있다. 유니소재화는 제품 재활용이 용이하고 유해물질 사용을 저감하기 위해 설계, 생산, 수거, 재활용 등을 고려한 기존 제품의 소재의 단일화(단순화)로 정의한다. 본 연구에서는 적용 가능한 유니소재화 대상제품을 평가할 수 있는 정성적, 정량적 평가 항목을 개발하였다. 평가항목은 경제성, 기술성, 환경성을 고려하여 총 9가지로 구성되어 있으며 평가항목을 적용하여 4가지 대상제품에 대해 사례를 연구했다. 연구 결과, 블라인드형 창문을 제외한 3가지 대상제품은 유니소재화 제품으로 적용이 가능하며 평가항목의 객관성을 높이기 위해서는 유니소재화의 개념을 구체화하고 산업별 특성을 고려하여 평가할 필요가 있다.