• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1055-1057
• /
• 2001

The switching circuit of PWM inverter is very complicated. By using one-chip $\mu$-com the complication of switching circuit is possible to be diminished. But because in one-chip $\mu$-com the limitation of processed memory size exists, the switching handling method has to be simple. In this paper, to effectively utilize the switching handling, we presented the estimation method of PWM pulses which is different form the conventional PWM switching method by the comparison.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.151-155
• /
• 1998

A new Fabry-Perot tunable filter has been built with simple construction, which does not require any additional aligning and/or beam-confining components for the reduction of the diffraction loss. For this feature, one of the two fibers for the filter is processed to have a concave mirror whose curvature is the same as that of the wavefront of the Gaussian beam from the first fiber. After high reflection coatings, the two fibers are aligned to result in an FP filter whose bandwidth, free spectral range, and insertion loss is 1.47nm, 52nm, 5.6dB respectively.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.50-57
• /
• 1994

In the non-destructive evaluation techniques using ultrasonic signal, backscattering noise from grain interface decreases the SNR of received signal. In this paper, SSP(split-spectrum processing) based on the constant FBR decomposition method has been applied to enhance the SNR. This algorithm helps to find optimal parameters of filter bank through a simple theory and has an advantage that reduce the signal processing time compared with the conventional constant bandwidth decomposition method. In this experiment, the 304 stainless steel sample is heat-treated and received ultrasonic signal is processed by SSP using the constand bandwidth decomposition method and the constand FBR decomposition method enhanced the SNR by 1.4 dB and reduced the required number of filters by 4 compared with the constant bandwidth decomposition method.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.3
• /
• pp.9-15
• /
• 2016

In this paper, DC-PLC typed one-wire controller was designed and manufactured especially for In-vehicle safe devices. One-wire by DC-PLC scheme is to be used as a power supply and ground to process the sensor data and to operate the vehicle actuators. To avoid complicate wires, we use the conventional wires without installing extra communication lines. The data collected from the sensors are transmitted to the main controller, processed by programming, and run the actuators corresponding to the commands sending to vehicle control board. The proposed method shows that only One-wire without requiring several wires make In-vehicle control devices simple and reduce the damage due to the loss of the wiring.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.4
• /
• pp.173-179
• /
• 2012

In this paper, we propose an efficient architecture for 2D IWT using an existing 1D IWT. Lifting based IWT is the architecture of which a multiplier is replaced by adders and shift registers. The structure is relatively simple and modular. The proposed architecture to process an image size with 256x256 pixels consists of 16 adders, 8 shift registers, and some memories. By processing two rows at the same time, 2D sub-band coefficients can be calculated immediately after 1D sub-band coefficients have been processed. The architecture is designed so that each image can be inputted consecutively. The number of adders and shift registers is increased by twice comparing the existing architecture, but the memory size and the execution time are decreased by half. The proposed architecture is implemented using Verilog-HDL and simulated using iSim. It is synthesized and demonstrated at ISE for xc5vlx330 in RPS3K board.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.928-931
• /
• 2008

Using 4,4'4"-tris(N-carbazolyl)-triphenylamine (TCTA) small molecule interlayer, we have fabricated efficient green PHOLED by solution process. The maximum current and power efficiency values of 33.7 cd/A and 19.6 lm/W are demonstrated, respectively. Results reveal a way to fabricate the PHOLED using TCTA interlayer by solution process, promising for efficient and simple manufacturing.

• Journal of the Korean Data and Information Science Society
• /
• v.6 no.2
• /
• pp.17-27
• /
• 1995

We propose a framework for representing and processing uncertain knowledge on the basis of constraint satisfaction. A system of equations and/or inequalities can be considered as a set of constraints that should be solved, and each constraint in the set is transformed into a corresponding logical formula which can be solved through a constraint solving program. Most of rule-based systems, for instance, use a simple probabilistic theory in order to maintain uncertain knowledge, therefore uncertain knowledge can be represented and processed in the constraint satisfaction program quite efficiently.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1053-1056
• /
• 2003

Progress in light emitting materials is presented. New polymers based on the Spiro concept show encouraging properties in electroluminescence performance and lifetime. The spiro-polymers can be tailor made to fit the RGB color requirements of a full color display. This class of materials showed recently very promising performance for white emission as well. They are readily soluble, show excellent thermal stability and can be processed by printing or through simple synthetic modification by photolithography technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.12
• /
• pp.3256-3264
• /
• 1996

This paper presents an efficient VLSI architecture for transposing matris in high speed. In the case of transposing N*N matrix, N$^{2}$ numbers of transposition cells are configured as regular and spuare shaped structure, and pipeline structure for operating each transposition cell in paralle. Transposition cell consists of register and input data selector. The characteristic of this architecture is that the data to be transposed are divided into several bundles of bits, then processed serially. Using the serial transposition of divided input data, hardware complexity of transpositioncell can be reduced, and routing between adjacent transposition cells can be simple. the proposed architecture is designed and implemented with 0.5 .mu.m VLSI library. As a result, it shows stable operation in 200 MHz and less hardware complexity than conventional architectures.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.3
• /
• pp.389-396
• /
• 1986

A pulsed ultrasonic doppler flowmeter for mesurements of velocity profils in man is described. The device projects a beam of ultrasound in burst of 570 ns duration at 3.5 MHz. The back-scattered signals are processed to produce a signal oxrresponding to the mean velocity over a small region of the flowing stream. The observation range of 112mm is divided into 128 depth channels. The size of this sample volume determines the flowmeter sensitivity and accuracy. The device uses a quadrature detector to detect the direction of the moving target(hemoglobin). The main feature of the novel instrumnet is its simple hardware structure due to sequential signal processing.