• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.152-158
• /
• 2015

We consider the problem of designing independently operating local quantizers at nodes in distributed estimation systems, where many spatially distributed sensor nodes measure a parameter of interest, quantize these measurements, and send the quantized data to a fusion node, which conducts the parameter estimation. Motivated by the discussion that the estimation accuracy can be improved by using the quantized data with a high probability of occurrence, we propose an iterative algorithm with a simple design rule that produces quantizers by searching boundary values with an increased likelihood. We prove that this design rule generates a considerably reduced interval for finding the next boundary values, yielding a low design complexity. We demonstrate through extensive simulations that the proposed algorithm achieves a significant performance gain with respect to traditional quantizer designs. A comparison with the recently published novel algorithms further illustrates the benefit of the proposed technique in terms of performance and design complexity.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.1
• /
• pp.36-45
• /
• 1998

A simple source voltage clamped resonant link (SVCRL) inverter is proposed to clamp the DC link voltage to the input source voltage and reduce the current rating of resonant inductor. The current control of a permanent magnet synchronous motor (PMSM) using a predictive current control technique (PCCT) employing the SVCRL inverter is also investigated to overcome the disadvantage of the current regulated delta modulation (CRDM) control technique. By using the PCCT based on the discrete model of a PMSM and estimation of back EMF, the minimized current ripple with small number of switchings can be obtained. Finally, the comparative computer simulation and experimental results are given to show the usefulness of the proposed technique.

• Journal of KIISE:Information Networking
• /
• v.33 no.6
• /
• pp.420-427
• /
• 2006

An RFID system is an important technology that could replace the traditional bar code system changing the paradigm of manufacturing, distribution, and service industry. An RFID reader can recognize several hundred tags in one second. Tag identification is done by tags' random transmission of their IDs in a frame which is assigned by the reader at each round. To minimize tag identification time, optimal frame size should be selected according to the number of tags. This paper presents new query optimization methods in RFID systems. Query optimization consists of tag number estimation problem and frame length determination problem. We propose a simple yet efficient tag estimation method and calculate optimal frame lengths that minimize overall query time. We conducted rigorous performance studies. Performance results show that the new tag number estimation technique is more accurate than previous methods. We also observe that a simple greedy method is as efficient as the optimal method in minimizing the query time.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.1-9
• /
• 2010

In this paper, we propose a new method of improving accuracy of motion estimation in mobile environments, compared with Rosten's algorithm. The present method selects corners as feature points. The Rosten's algorithm uses simple addition and subtraction to detect the corners. Although it has the advantage of faster processing speed, Rosten's algorithm has a drawback of low performance in motion estimation. We use the NCC(Normalized Cross Correlation) coefficients to match the corners, and remove in two steps the outliers of inaccurate matching corners. We compare the proposed algorithm with Rosten's algorithm by applying both to the real images. We find that the proposed method shows better performance than Rosten's algorithm in motion estimation. In addition, we implement the present method on mobile devices and confirm that it works in mobile environments in real time.

• The Journal of Korea Robotics Society
• /
• v.11 no.4
• /
• pp.300-309
• /
• 2016

This paper proposes a method for motion estimation of consecutive cameras using 3-D straight lines. The motion estimation algorithm uses two non-parallel 3-D line correspondences to quickly establish an initial guess for the relative pose of adjacent frames, which requires less correspondences than that of current approaches requiring three correspondences when using 3-D points or 3-D planes. The estimated motion is further refined by a nonlinear optimization technique with inlier correspondences for higher accuracy. Since there is no dominant line representation in 3-D space, we simulate two line representations, which can be thought as mainly adopted methods in the field, and verify one as the best choice from the simulation results. We also propose a simple but effective 3-D line fitting algorithm considering the fact that the variance arises in the projective directions thus can be reduced to 2-D fitting problem. We provide experimental results of the proposed motion estimation system comparing with state-of-the-art algorithms using an open benchmark dataset.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.1
• /
• pp.79-86
• /
• 2005

In this paper, an estimator scheme for the rotor speed and flux of an induction motor is proposed on the basis of a fourth-order electrical model. It is assumed that only the stator currents and voltages are measurable, and that the stator currents are bounded. There are a number of common terms in the motor dynamics, and this is utilized to find a simple error model involving some auxiliary variables. Using this error model, the state estimation problem is converted into a parameter estimation problem assuming that the rotor speed is constant. Some stability properties are given on the basis of Lyapunov analysis. In addition, the rotor resistance, which varies with the motor temperature, can also be estimated within the same framework. The effectiveness of the proposed scheme is demonstrated through computer simulations and experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.2042-2059
• /
• 2019

Digital shadow puppet has traditionally relied on expensive motion capture equipments and complex design. In this paper, a low-cost driven technique is presented, that captures human pose estimation data with simple camera from real scenarios, and use them to drive virtual Chinese shadow play in a 2.5D scene. We propose a special method for extracting human pose data for driving virtual Chinese shadow play, which is called 2.5D human pose estimation. Firstly, we use the 3D human pose estimation method to obtain the initial data. In the process of the following transformation, we treat the depth feature as an implicit feature, and map body joints to the range of constraints. We call the obtain pose data as 2.5D pose data. However, the 2.5D pose data can not better control the shadow puppet directly, due to the difference in motion pattern and composition structure between real pose and shadow puppet. To this end, the 2.5D pose data transformation is carried out in the implicit pose mapping space based on self-network and the final 2.5D pose expression data is produced for animating shadow puppets. Experimental results have demonstrated the effectiveness of our new method.

• Journal of KSNVE
• /
• v.8 no.4
• /
• pp.690-699
• /
• 1998

This paper discusses the techniques, procedures and the results of the ground vibration test(GVT) performed on the development aircraft and the simple procedure of FE model updating technique from the GVT results. The GVT was carried out using random excitation technique with MIMO(Multi-Input-Multi-Output) data acquistion method, and taking full advantage of poly-reference global parameter estimation technique to identify the vibration modes. In dynamic FE modeling, the aircraft was represented by beam elements and all dynamic analysis was performed using MSC/NASTRAN for this model. In updating procedure, the stiffness of the beam model was adjusted iteratively so as to get the natural frequencies and mode shapes close to the GVT results.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.391-393
• /
• 1995

An improved predictive control technique using adaptive load estimation is proposed. The conventional predictive control technique has not concerned load variations and system parameters. Thus control performances are undesirable such as large current ripples and offset. In this paper the proposed controller employing a simple adaptive algorithm to estimate load is expected to be useful to overcome the problems of conventinal predictive controller.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.363-364
• /
• 2007

In this paper, we present a novel motion-compensated interpolation technique for non-moving caption region to prevent the block artifacts due to the failure of conventional block-based motion estimation algorithm on the block is consist of non-moving caption and moving object. Experimental results indicate good performance of the proposed scheme with significantly reduced block artifacts on image sequence that include non-moving caption. Also the proposed method is simple and adequate for hardware implementation.