• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1029-1036
• /
• 2009

Seapage condition by sea water may appears on sea dike due to the gap of tidal, which generated by the sealevel repeatedly moves up and down result of the change of tidal level. In this study, apparatus was developed to apply similitude after setting the critical section. It was found that the soil loss was dramatically increased by increasing hydraulic gradient step by step. Also, to understand the change of seadike which considered the changes of the change of tidal level and inside sealevel, it was executed the experiments which divided the sea level condition of inside by continually changes the sealevel difference which is outside of the high tide and ebb tide.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.114-120
• /
• 2008

This study is to compare and analyze the material flow, deformation characteristics, and forming load of flange by means of similitude experimental method of model material using plasticine. In order to find optimal forming conditions, prototype experiments were designed to investigate forming characteristics of general-purpose flange under various working conditions. As a result of prototype experiments, billet thickness and gap-height ratio was found to be the most influential experimental parameter in flange forming. Forming loads from prototype experiments were compared to the results of finite element analysis after conducting estimation of forming loads of real material. Results of prototype experiments based on model material techniques are expected to be used as a basic data of die design f3r the development of products and process.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.203-211
• /
• 2001

This paper presents load transfer efficiency of skewed transverse joint of jointed concrete pavement with the fatigue model test. A 1/12 scale model was used to satisfy the geometry, loading, material similitude, which are variables to the skew angel of transverse joint. As the test results by fatigue load 700kgf applied, the deflection and stress of transverse joint were decreased as to increasing of skew angle of transverse joint. In addition, load transfer efficiency of transverse joint with skew angle is better than the load transfer efficiency of transverse joint without skew angle.

• 공학교육연구
• /
• 제14권5호
• /
• pp.46-52
• /
• 2011

This paper examines the emergence of mechanical engineers in the technological and social context of professionalization in England. Despite their technological progress, most steam engine wrights and machine tool builders were individual workshop owners working to order in the early 19th century. In the 1830s and 1840s, however, the railway boom produced so called railway engineers by providing them with some managerial experience as the canal building did in civil engineering. Railway engineers played a dominant role to establish the Institute of Mechanical Engineers(IME) in 1848. It was IME that stated what is a mechanical engineer and helped its members be in the similitude of the civil engineers in social and technological activities.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
• /
• pp.57.2-62
• /
• 1999

Fractal coding is image compression techniques using one of image characteristics self-transformability. In fractal image coding, the encoding process is to select the domain block similar to a range block. The reconstructed image quality of fractal image coding depends on similitude between a range block and the selected domain block. Domain block similar to a range blocks. In fact, the error of the reconstructed image adds up the generated error in encoding process and the generated error in decoding process. But current domain block estimating function considered only the encoding error. We propose a domain block estimating function to consider not only the encoding error but also the decoding error. By computer simulation, it was verified to obtain the high quality reconstructed image.

• 물과 미래
• /
• 제20권1호
• /
• pp.63-72
• /
• 1987

본 연구는 표이동의 예측방법중 이동상수리모형실험방법을 위주로 그 상이예측 및 실험순서의 체계확립에 중점을 두고 실증적인 문제로서 원자력발전소 9,10 기호 해상구조물 주위의 표사이동예측을 시도해 보았으며 아울러 그에 따른 취수구의 매몰방지대책에 관해서도 고찰해 보았다. 실험결과 취수구의 매몰방지대책으로는 이안유장벽, 돌제공법 중 비교적 이안제공법이 취수구매몰방지에 도움을 주고 구조물 안정에도 기여함을 발견하였다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.321-328
• /
• 2003

The objective of this study is to investigate the seismic response of high-rise RC bearing-wall structures with irregularity. For this purpose, three 1:12 scale 17-story reinforced concrete model structures were constructed according to the similitude law, in which the upper 15 stories have a bearing-wall system while the lower 2-story frames have three different layouts of the plan : The first one is a moment-resisting frame system, the second has a infilled shear wall with symmetric plan and the third has a infilled shear wall with eccentricity, Then, these models were subjected to a series of earthquake excitations. The test results show the followings: 1) the existence of shear wall reduced greatly shear deformation at the piloti frame, but has almost the negligible effect on the reduction of the overturning-moment angle, 2) the frame with shear wall resists most of overturning moment in severe earthquake, 3) the torsional behavior is almost independent of the translational, 4) the absorbed energy due to the overturning deformation has the largest portion in the total absorbed energy.

• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.721-728
• /
• 2006

지진은 구조물에 막대한 피해를 발생시키는 것으로 보고되고 있으나, 우리나라에 내진설계규정이 도입되기 전인 1988년 이전에 설계된 건물은 이에 대한 대책이 없다. 특히 공동주택의 경우 지진저항요소가 없는 구조물이 다수 있는 것으로 조사되었다. 이러한 구조물에 대하여 내진성능의 정도를 파악하고, 성능지수가 부족한 구조물에 대해서는 적절한 보강이 이루어져야 할 것이다. 본 연구에서는 이전의 연구에서 범용 구조해석 프로그램인 MIDAS를 이용하여 모델 구조물의 내진성능을 평가하여 얻어진 내진성능의 부족함을 기초로 5층 규모의 철근콘크리트 벽식 구조물에 상사법칙을 적용하고, 진동대 실험을 수행하여 국내외 규준에 의한 모델 구조물의 내진성능을 평가하였다. 진동대 실험의 경우 실험의 공간적 제약으로 인하여 원형 구조물에 대한 실험을 할 수 없어, 구조물의 원형크기를 상사법칙에 의하여 필요한 규모로 축소하여 제작하였다. 성능수준을 평가해 본 결과 내진설계가 수행되지 않은 구조물은 PGA 등급 0.2g의 지진에 대하여 사용한계수준의 내진성능을 나타내었으며 허용층간변위를 평가해 본 결과 0.2g의 지진등급까지만 허용한계수준의 층간변위를 나타내어 내진성능에 대한 보강이 필요할 것으로 판단되었다.

• 한국지진공학회논문집
• /
• 제21권3호
• /
• pp.125-135
• /
• 2017

Various seismic isolation methods are being applied to bridges and buildings to improve their seismic performance. Most seismic isolation systems are the structural seismic isolation systems. In this study, the seismic performance of geotechnical seismic isolation system capable of isolating the lower foundation of the bridge structure from ground was evaluated. The geotechnical seismic isolation system was built with teflon, and the model structure was made by adopting the similitude law. The response acceleration for sinusoidal waves of various amplitudes and frequencies and seismic waves were analyzed by performing 1-G shaking table experiments. Fixed foundation, Sliding foundation, and Rocking foundation were evaluated. The results of this study indicated that the Teflon-type seismic foundation isolation system is effective in reducing the acceleration transmitted to the superstructure subject to large input ground motion. Response spectrum of the Rocking and Sliding foundation structures moves to the long period, while that of Fixed foundation moves to short period.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.210-220
• /
• 1997

This study is to systematically analyze the effect of various kinds of design parameters on heat transfer and pressure drop characteristics of heat exchanger with a slit fin. TAGUCHI method, known to us as a very reasonable tool in the parametric study, is employed in the present work. Experimental factors have been limited to seven cases, considering the production of sample and the cost. The 18 kinds of large scale models are made by compounding level on each factor and the heat transfer and flow characteristics on each model has been analyzed. The present results allow us to be able to quantitatively estimate the various parameters affecting the heat exchanger performance, and main factors for an optimum design of a heat exchanger have been selected. The optimum design value on each parameter was presented and the reproducibility on the results was guaranteed.